FAULHABER synchronous servomotors

Power: 92, 134, 46 W
Torque: 0.11 Nm - 1.59 Nm
Rotational speed: 0 rpm - 4,000 rpm

MAC050 to MAC141- the complete solution for lower power ratings. Choose between 4 sizes of motor. Also in IP67 versions. Choose Expansion module from the extensive selection for any application. Expansion module you can choose between: ...

Power: 134 W
Torque: 0.32, 1.59, 0.9, 0.48 Nm
Rotational speed: 0 rpm - 4,000 rpm

IP67 Versions of MAC140 or MAC141 Resistant against rough chemicals • Cost-Effective in harsh wet environment • Ideal for food processing, pharmaceutical and chemical industries • A double shaft seal and leak-proof cable entry ...

Power: 140 W
Torque: 0.32, 0.48, 0.9, 1.59 Nm
Rotational speed: 0 rpm - 4,000 rpm

Generation 3 MAC140/141 motor - with new generation of encoder with unlimited down time, no battery required! JVL is proud to announce a completely new generation of Mini-MAC 140 W servo motors. These new motors are based on previous ...

Power: 0.22 kW - 10.76 kW
Torque: 0.64 Nm - 85 Nm
Rotational speed: 6,000, 4,000, 3,000, 2,000 rpm

High Dynamic AC Brushless Servo Motor Unimotor hd is a high dynamic brushless AC servo motor range designed for use in pulse duty applications where rapid acceleration and deceleration are required. ...

Power: 50 W - 200 W
Intensity: 0.7 A - 3.5 A
Torque: 0.12 Nm - 0.35 Nm

The HeiMotion Premium series of brushless AC servo motors are engineered to meet the most demanding application requirements. Seven frame sizes are covering a wide range of torque levels and speeds. Use of our proven ...

Power: 550, 200, 325, 400 W
Intensity: 0.8 A - 3.3 A
Torque: 0.5 Nm - 1.2 Nm

The HeiMotion Premium series of brushless AC servo motors are engineered to meet the most demanding application requirements. Seven frame sizes are covering a wide range of torque levels and speeds. Use of our proven ...

Power: 750 W - 1,200 W
Intensity: 1.6 A - 7.1 A
Torque: 1.7 Nm - 3.5 Nm

The HeiMotion Premium series of brushless AC servo motors are engineered to meet the most demanding application requirements. Seven frame sizes are covering a wide range of torque levels and speeds. Use of our proven ...

Power: 200 W - 1,000 W

Servo motors EM1: The 23-bit AC synchronous servo motors of the EM1 series are specially adapted to servo drive ED1 and are available in different performance classes and encoder versions, ...

Power: 11 W - 30 W
Torque: 1 Nm - 90 Nm
Rotational speed: 1,500 rpm - 6,000 rpm

With the TA series, KEB offers permanent magnet synchronous motors, which are available, graded mechanically in six different sizes. Whether they are on their own or integrated into modular gear systems, they convince ...

Power: 0.1 kW - 250 kW
Torque: 0.32 Nm - 47.7 Nm
Rotational speed: 1,500 rpm - 3,000 rpm

VEICHI provides OEM/ODM Service for TOP Customers. VEICHI VM7 Series Servo Motor is used together with the newly upgraded SD700 servo driver. Excellent performance design enables our motors to be widely used in various ...

Power: 0.1 kW - 7.5 kW
Intensity: 10.9 A - 17 A
Torque: 28.01 Nm - 47.75 Nm

VEICHI provides OEM/ODM Service for TOP Customers. VEICHI V7U Series Servo Motor is used together with the newly upgraded SD700 servo drive. Excellent performance design enables our motors to be widely used in various ...

Intensity: 1.1 A
Torque: 1.2 Nm
Rotational speed: 3,000 rpm

• Our smallest motor, HDD 09E, with a rated speed 3000 rpm, rated torque 1,2 Nm at a rated current 1.1A and the ultra compact length of 47,3 mm. • For shorter accelerations you get a peak torque of 3.1 Nm at a current of 3A. • Weight ...

Intensity: 2.05 A
Torque: 1.05 Nm
Rotational speed: 6,000 rpm

• Our smallest motor, HDT 09E, with a rated speed 6000 rpm, rated torque 1,05 Nm at a rated current 2.05A and the ultra compact length of 47,3 mm. • Weight is only 1,7 kg. • Resolver, Hiperface, EnDat protocol and a number of drive ...

Intensity: 2.3 A
Torque: 2.5 Nm
Rotational speed: 3,000 rpm

• Our most sold motor , HDD 09J, with a rated speed 3000 rpm, rated torque 2,3 Nm at a rated current 2.3A and a compact length of 59,6 mm. • Weight is only 2,4 kg. • Resolver, Hiperface, EnDat protocol and a number of drive compatible ...

Power: 1.9 kW - 4.4 kW
Torque: 0 Nm - 47 Nm
Rotational speed: 0 rpm - 3,000 rpm

esiMot SL: The all-in-one brushless servo drive with integrated electronics and three-phase 400V power supply offers high variability and good integration capability through the existing inputs and outputs as well as its comprehensive ...

Power: 120 W - 2,800 W
Torque: 0.22 Nm - 7 Nm
Rotational speed: 1,600 rpm - 6,000 rpm

The esiMot series is a brushless DC electric servo-motor with integrated motion controller. This series has a power range from 120 up to 600 watts. This is characterized to have integrated positioning, an speed-/torque ...

Power: 800 W - 3,200 W

The Esimot XL series is manufactured by Esitron, and is a decentralize drive which has a brush-less servo motor that is incorporated with electronics. It also has a speed-/torque regulator with digital 4-Q-regulator. The ...

Power: 270 W
Torque: 0 Nm - 4 Nm
Rotational speed: 4,000, 3,000, 2,000, 1,000 rpm

PMSM - Motor with integrated Elife-Drive Controller - Elife-Motor with Integrated Elife-Drive Controller is designed to be easier to install and use. A wide range of programmable parameters allow you to customize your system for your ...

Power: 31.5 W - 188 W
Torque: 0.36 Nm - 1.8 Nm
Rotational speed: 1,000, 3,000 rpm

GENERAL SPECIFICATION Winding type：YWE Hall effect angle：120 Deg. Electrical angle Radial play：0.025mm /460g End play：0.025mm /400g Max. radial force：115N @ 20mm from the flange Max. axial force：45N Insulation class：B Dielectric ...

Power: 0 W - 10 W
Intensity: 140 mA
Torque: 0.004 Nm - 4 Nm

10**M5...M... 10mm 12V Micro DC Servo Motor Diameter：10mm Length ： 43-61 mm Voltage：12V Gearbox：Metal CNC Applications Medical equipment, intelligent prostheses, industrial robots, etc. Options Lead wires ...

Power: 0 W - 30 W
Intensity: 235 A
Torque: 5 Nm - 10 Nm

12**M7...M... 12mm 4.5V DC Servo Motor Diameter：12mm Length ： 42-53 mm Voltage：4.5V Gearbox：Metal CNC Applications Medical equipment, intelligent prostheses, industrial robots, etc. Options Lead wires ...

Power: 0 W - 30 W
Intensity: 920 mA
Torque: 0.0128 Nm - 9 Nm

16**C5...M... 16mm 12V DC Coreless Gearmotor With Encoder Diameter：16mm Length : 41-55 mm Voltage：12V Gearbox：Metal CNC Applications Medical equipment, intelligent prostheses, industrial robots, etc. Options Lead wires ...

Power: 3 W
Torque: 0.0049, 0.0147 Nm
Rotational speed: 6,000 rpm

Use of Nd magnets allows excellent responsiveness and high output in a compact size. The rotor is evenly balanced to suppress mechanical vibrations. Uses slotless coils which prevent cogging and allow smooth revolutions, even at low ...

Power: 5 W
Torque: 0.0081, 0.0245 Nm
Rotational speed: 6,000 rpm

Use of Nd magnets allows excellent responsiveness and high output in a compact size. The rotor is evenly balanced to suppress mechanical vibrations. Uses slotless coils which prevent cogging and allow smooth revolutions, even at low ...

Power: 6 W
Torque: 0.0098, 0.0235 Nm
Rotational speed: 6,000 rpm

Use of Nd magnets allows excellent responsiveness and high output in a compact size. The rotor is evenly balanced to suppress mechanical vibrations. Uses slotless coils which prevent cogging and allow smooth revolutions, even at low ...

... carriages, dual-crowns angular-contact ball bearings with 60° angular capabilities in the precision class P4, and synchronous servomotors complete with permanent magnets (integrated into the hollow shafts). ...

Power: 30 kW
Intensity: 54.9 A
Torque: 2 Nm

... no excitation loss on the rotor of permanent magnet synchronous motor, and there is no friction loss and contact loss between the brush and the slip ring. Therefore, the permanent magnet synchronous ...

Power: 30 kW
Intensity: 54.9 A
Torque: 2 Nm

This series of motors are mainly used in the industry of petroleum and chemical industry, instead of current asynchronous motors, and can also be used to replace asynchronous motors in other industries. This series of motor is our high ...

Power: 50 W - 1,000 W

... power the DC servo motor of the P series are designed specially for use in general mechanical engineering. They can also be used in high power application such as grinders. They are precise in temperature and speed stable. ...

Power: 480, 550, 750 W
Intensity: 6, 2.4, 3.3, 1.4, 1.45 A
Torque: 5.8, 6.9, 9.5, 2.3, 3.7 Nm

... installation iX + DT= iDT. This is the formula for saving time: in the iDT, the inverter iX is directly connected to the servo motor DT. Both are directly wired to each other and therefore quick to install. Like the ...

Power: 280, 230, 330, 390 W
Intensity: 0.82, 0.86, 0.59, 0.77, 2.28 A
Torque: 2.6, 0.74, 0.44, 3.1, 1.39 Nm

Synchronous servo motor with integrated inverter and hybrid cable connection Less effort, reduced costs The ihXT is a combination of an inverter and a servo motor. It is optimised for smaller outputs ...

Power: 0.34, 0.59 kW
Intensity: 0.9, 2.18, 4, 9.6 A
Torque: 0.54, 0.94, 2.1, 5 Nm

Applications • Positioning and actuating drive for drive tasks with or without transmission • For intermittent operations • Control drive for continuous operation Connection cable Nominal cross-section of copper conductor ...

Intensity: 1.4 A - 22.8 A
Torque: 0.23 Nm - 59 Nm
Rotational speed: 3,000, 1,500 rpm

The modular construction concept is the basis for the wide range of standard models. The slotless stator design results in outstanding technical properties such as high speed, high torque, zero cogging, minimal torque ripple, high efficiency ...

Intensity: 8, 18.5, 15 A
Torque: 0.8, 2.6, 3.85 Nm
Rotational speed: 4,000, 3,100, 1,500 rpm

BR series multi-pole brushless motor, originally developed for direct drive use in AGVs, targeting a high torque-to-weight ratio. Features Solid and Hollow shaft Reduced weight brushless motors Small volume High torque/weight ratio Pancake ...

Intensity: 20 mA
Operating temperature: -40 °C - 170 °C

Very compact dynamic AC servo motors Power Rated torque 0.35 to 2.25 Nm Sizes 57 to 110 mm Features Ultra compact size Light Hall sensor included Robust

Power: 2 kW - 7 kW
Torque: 0.28 Nm - 60 Nm

... application and which also makes the most of the rated current of the servo amplifier used. All Jetter AG servo motors are extremely rugged 3-phase synchronous motors with UL certification. They are available ...