FLUX precision flow meters

Volumetric flow rate: 10 l/min - 100 l/min
Process pressure: 6 bar
Precision: 1 %

FLUX Flow meters, nutating disc type FMC 100, are designed for the use with FLUX drum pumps or for the stationary application e.g. in piping systems. With the evaluation unit FLUXTRONIC® filling and dosing ...

Volumetric flow rate: 25 l/min - 250 l/min
Process pressure: 6 bar

FLUX flow meters FMC 250, built to the nutating disc principle (FMC), are designed for the stationary use in e.g. piping systems. With the evaluation unit FLUXTRONIC® filling and dosing processes of almost ...

Volumetric flow rate: 10 l/min - 100 l/min
Process pressure: 4 bar

... with maximum precision and highest safety. Technical data: - Size of solids: max. 1,5 mm - Viscosity: min. 1 mPas - max. 2500 mPas - Housing Materials: Polypropylene Product attributes: - Nutating disc meter - ...

Volumetric flow rate: 0.1 l/min - 100 l/min
Process temperature: -10 °C - 70 °C
Process pressure: 10, 64, 100 bar

The High Performance MFM / MFC That Adapts To Your Process Intelligent Mass Flow Meters/Controllers EL-FLOW® Prestige, the latest generation thermal mass flow meters ...

Volumetric flow rate: 0.1 l/min - 1,670 l/min
Process temperature: -10 °C - 70 °C
Process pressure: 200, 400, 64, 100 bar

Proven Performance in Mass Flow Measurement & Control EL-FLOW® Select Series Mass Flow Meters/Controllers are thermal mass flow meters ...

Volumetric flow rate: 0.1 l/min - 50 l/min
Process temperature: -10 °C - 50 °C
Process pressure: 1,000, 1,500 psi

... as well as other high purity gas applications. The base blocks of the Mass Flow Meters and Controllers have 1/4" face seal male (VCR) connections. Metal Sealed Mass Flow Meter/Controller ...

Volumetric flow rate: 0 l/min - 0.1 l/min
Process temperature: 5 °C - 50 °C
Process pressure: 0 bar - 5 bar

Micro Flow Rate Liquid Flow Meter By combining a thermal MEMS sensor and a highly corrosion-resistant quartz glass flow path, the product can measure micro flow ...

Volumetric flow rate: 0.5 m³/h - 170 m³/h
Process temperature: -10 °C - 60 °C
Process pressure: 0 bar - 10 bar

The CMG Series of gas flow monitors employs our proprietary thermal flow rate sensor as the sensing element, and measures the fuel flow rate for gas burners. The CMG ...

Volumetric flow rate: 0 l/min - 300 l/min
Process temperature: -10 °C - 50 °C
Process pressure: 0.2 bar - 2 bar

Built upon proven TSI flow sensor technology, the NEW 5000 Series Flow Multi-Meter redefines what a flow meter can do for you. This all-in-one gas mass ...

... ultrasonic technology for mobile and highly accurate flow measurements Special features: ■ Very high measurement accuracy (also bidirectional) ■ Accurate even at extremely low flow rates (e.g. minimum ...

Volumetric flow rate: 1.8 l/min - 1,133 l/min
Process temperature: -20 °C - 80 °C
Process pressure: 250 bar

... rotational speed is proportional to the flow rate. The rotational speed is detected by means of a biased Hall sensors, i.e. there are no magnets in the flow chamber. ●High precision ...

Volumetric flow rate: 1.6 m³/h - 3,125 m³/h
Process temperature: -40 °C - 70 °C
Process pressure: 1 bar - 10 bar

... reasonably priced, most accurate flow meter tailored for your applications. A flowmeter with base functionality, short delivery and a simple and clearly understandable documentation. EPD ...

Volumetric flow rate: 0 m³/h - 244,290.2 m³/h
Process temperature: -20 °C - 120 °C
Process pressure: 1.6, 1, 0.6 MPa

The NMG-Series electromagnetic flowmeter is used to measure the volume flow of conductive liquids and slurries in closed pipes. The measuring flow rate is not affected by density, viscosity, ...

Process temperature: -40 °C - 140 °C

... the Panametrics line of ultrasonic flow meters for high-accuracy metering applications. Used primarily for measuring hydrocarbon liquids and water for critical use. the eight-path design of the LCT8 enables ...

Process temperature: 180 °C
Process pressure: 0.1 MPa

... YOUR STEAM CONSUMPTION The clamp-on saturated steam ultrasonic flowmeter is capable of measuring steam flow without the need to cut piping. Measure the steam flow with precision ...

Volumetric flow rate: 0.6 m³/h - 2,000 m³/h
Process temperature: -10 °C - 60 °C
Precision: 2, 5 %

DETECT AND STOP AIR LEAKS The FWD ultrasonic air flow meter measures the flow rate of air or nitrogen gas. it is ideal for the management of the operating load rate of compressors, ...

Process temperature: 870 °C
Process pressure: 1,380 bar
Precision: 0.5 %

... be measured with the V-cone flowmeter? -Liquid flow measurement -Steam flow measurement -Gas flow measurement ADVANTAGES Reduce installation time and engineering costs: No straight ...

Precision: 0.25, 0.4 %
Repeatibility: 0.5 %

... various sensor parameters, anticipating possible problems. The battery converter with integrated modem MV255, flow meters, energy meters, contact our specialists.

Volumetric flow rate: 0 m³/s - 31.4 m³/s
Process temperature: -20 °C - 180 °C
Process pressure: 6 bar - 250 bar

... meters MS2500, flow meters, energy meters, ultrasonic flowmeters, and industrial automation systems have been ISOIL Industria‘s passion and continuous research since ...

Volumetric flow rate: 0.2 m³/h - 2,000 m³/h
Process temperature: 0 °C - 150 °C
Process pressure: 16, 40 bar

... against the direction of the fluid flow. Description The ultrasonic flow meter IFX-A, flow meters, energy meters, ultrasonic flowmeters, ...

Process temperature: -200 °C - 600 °C
Precision: 0.3, 1 %

... installed flow meters. The FLUXUS F601 portable ultrasonic flow meter is measurement-ready in less than 5 minutes, including the measurement of the pipe wall thickness, ...

Process temperature: -190 °C - 630 °C
Precision: 1 %
Repeatibility: 0.15 %

... and BTU calculations are done in accordance with EN 1434 Thermal Energy meter standard. Like all measuring systems of the FLUXUS series, the F721TE measures the volumetric flow rate non-invasively ...

Process temperature: -40 °C - 400 °C
Precision: 1 %
Repeatibility: 0.1 %

... safety and reliability. Conventional ultrasonic mass flow meters measure the volume flow of a medium and rely on a constant density or concentration of this medium to calculate the ...

Volumetric flow rate: 0.1 l/min - 45.4 l/min
Process temperature: 0 °C - 121 °C
Process pressure: 0 psi - 100 psi

... PTFE-PFA flow meters Incorporating the principles of traditional rotameter flow technology, these rugged PTFE-PFA flow meters offer solutions to low ...

Volumetric flow rate: 0 l/min - 1,000 l/min
Process temperature: 21 °C
Process pressure: 0 psi - 1,000 psi

... two laminar flow paths, one through the primary flow conduit, and the other through a capillary sensor tube. Both flow conduits are designed to ensure laminar flows ...

Volumetric flow rate: 0 l/min - 1,000 l/min
Process temperature: 21 °C
Process pressure: 20 psi

... mass flow meter The flow rate can be displayed in 23 different volumetric flow or mass flow engineering units including user specific. Flow ...

Process temperature: 5 °C - 50 °C
Process pressure: 0 bar - 10 bar
Precision: 0.35, 1 %

... Thermal Mass Flow Controllers & Meters One device. Multiple gases and flows. Maximum flexibility. Multiple gases in one device equals maximum process flexibility and productivity. ...

Volumetric flow rate: 0 l/min - 36,000 l/min
Process temperature: -14 °C - 65 °C
Process pressure: 310, 100, 70 bar

Precision mass flow control. Hardened for the harshest environments. Now available with EtherNet/IP™ Whether it’s dust, moisture, temperature extremes or wash-down requirements, the SLAMf Series elastomer ...

Process temperature: 0 °C - 150 °C
Process pressure: 0 psi - 90 psi
Precision: 1, 0.35 %

... temperature flow control accuracy and efficiency. Engineered for the challenging conditions associated with high temperature delivery of condensable precursors and dopants, the 9861 Series high temperature ...

Process temperature: -20 °C - 800 °C

Measurement of the volume flow, especially in dusty applications. Easy installation on existing ducts, no Venturi or similar conversions are required. Can be used in environments with low dust loads or in harsh conditions ...

Process temperature: 120 °C
Process pressure: 25 bar - 110 bar

FLOW MEASUREMENT FOR DENSE-PHASE CONVEYING Continuous solids mass flow measurement in dense-stream conveying and high levels of throughput Designed to measure solid flows ...

Process temperature: 150 °C
Process pressure: 150 bar

... reagent in flue gas treatment and transport lines with very low material concentration Electrodynamic flow sensor for measurement of low flow rates from 0 to 100 kg/h. For pipe diameters up to 1 ...

Process temperature: -18 °C - 121 °C
Process pressure: 10, 34 bar
Precision: 1, 0.5, 2 %

... Wastewater treatment aeration control Burner and furnace air flow control HVAC duct/damper control Blower and dryer air flow control Lake, pond and aquaculture aeration Compressed ...

Process temperature: -18 °C - 121 °C
Process pressure: 34, 10 bar
Precision: 2, 1, 0.5 %

... compact, low cost solution for accurate, repeatable flow measurement of biogas, digester gas, landfill gas, methane and natural gas as well as air, compressed air or nitrogen. This insertion-style flow ...

Process temperature: -18 °C - 121 °C
Process pressure: 41, 16.5 bar
Precision: 0.5, 1, 2 %

The ST75 Series thermal flow meters are a compact, low cost solution for accurate, repeatable direct mass flow measurement of air and gases. These in-line (spool-piece) style flow ...

... mimic an analog instrument. In this configuration the flow output is available as an analog signal and flow controllers will respond to analog commands. AUTO-ZERO. The Digital 300 Sériés of flow ...

Process temperature: -30 °C - 80 °C

For ultrasonic flow measurement of slight to heavily polluted media in part filled and full pipes and channels. Best possible results even under difficult conditions. -Very high accuracy flow ...

Process temperature: -20 °C - 70 °C

... velocity paths. The NivuFlow 650 operates over the full bi-directional flow range without causing obstruction or head loss where the large array of NIVUS transducer models permits flow measurement across ...

... patented NIVUS Cross Correlation method enables highly accurate real time flow measurement. Measurement of local velocities at 16 gates results in a real time flow profile for your best flow ...

Volumetric flow rate: 0 m³/h - 3,800 m³/h
Process temperature: 0 °C - 80 °C
Process pressure: 0 Pa - 1,500 Pa

... The venturi tube is a primary element for flow metering in tubings. The principle of the venturi tube allows for meterings with all media. The venturi tube described here is especially designed for air flow ...