- Detection - Measurement >
- Electrical Measurements >
- Tester >
- Hioki
Hioki testers
ISTA 3A 6A Amazon Vibration Test Bench can complete sinusoidal vibration test and broadband random vibration test respectively, and can complete classic (half sinusoid, trapezoid, back peak saw tooth) pulse and shock response spectrum ...
AI SI LI (China) Test Equipment Co., Ltd
Application: Mechanical Shock Tester is mainly used for small products for impact test, to assess the product's ability to withstand shock damage. It is often used in electronic components, electronic circuit boards ...
AI SI LI (China) Test Equipment Co., Ltd
Application: Half Sine Shock and Bump Tester for Battery is designed for measuring and ensure shock performance of products and packages. It can do normal shock test with half sine wave, square wave, sawtooth wave etc., ...
AI SI LI (China) Test Equipment Co., Ltd
GBW-60B Computer Control Cupping Testing Machine GBW-60B computer control cupping testing machine mainly for the test of the metal sheet and strip, according to the national standard GB / T 4156-2007, it can test the plastic deformation ...
BT-60 Manual Cupping testing machine Cupping testing machine, designed according to GB/T 4156-2007, is used to evaluate the resistance of metal materials to the anti-cracking or anti-separation of metal substrates after being subjected ...
This machine is widely used for the testing of impact strength test of plastic pipe materials and pipe components, and also suitable for the external loads impact strength test of plastic board, glass fiber reinforced plastic and kinds ...
FIT1130 Falling dart impact testing machine applies to impact test for all kinds of plastic film and sheet. It confirms to ASTM 1709-04, ISO7765.1-1988 “Plastic film and sheet- Determination of impact resistance by the free-falling dart ...
... Series offers the perfect entry-level devices for the world of dissolution testing. The perfect entry-level dissolution tester. High-head with 6 test stations Dimensions (width / depth / height): 510 mm / 450 mm ...
ERWEKA
The ERWEKA DT 950 Series is our first digital dissolution tester on the market, equipped with the most advanced technology for the requirements of today and the challenges of tomorrow. With state-of-the-art embedded ...
ERWEKA
With the ERWEKA RRT 10, automatic dissolution testing of different extended and sustained release dosage forms has become easier than ever before. This unit is perfectly suited for simulating the pH-changes within the human body. By placing ...
ERWEKA
Proxy Tester is a portable instrument created to satisfy the needs of both installers as well as retailers. It makes it possible to control correct functioning of any D.C. sensor or magnetic sensor even when lacking expensive ...
The HVA28 and HVA28TD are truly compact and portable VLF test sets which determine the condition of medium voltage cables. HVA28TD device includes integrated Tan Delta diagnostics capabilities, in comparison to HVA28 device, which can ...
b2 electronics GmbH
... diagnostics unit enables a straightforward condition assessment of the cable system. The new HVA68TD is more than just a VLF tester. In addition to VLF testing & Tan Delta diagnostics capability, it allows to pre-locate ...
b2 electronics GmbH
The HVA34-1 and HVA34TD-1 are truly compact and portable VLF test sets which determine the condition of medium voltage cables. HVA34TD-1 device includes integrated Tan Delta diagnostics capabilities and features TD leakage current correction ...
b2 electronics GmbH
* Each axis ( X, Y, Z direction ) electromagnetic field measurement. * Sum of XYZ electromagnetic field measurement. * Real time data logger, save the data into the SD memory card and can be downloaded to the Excel, extra software ...
Lutron
... 500μm PROBES: φ14mm Freq of 60 KHz and φ8mm freq of 500 KHz each one RESOLUTION0.1~0.001%IACS Digital Conductivity Tester Sigma 2008B Working Freq. 60KHz and 500KHz, sine wave Measurement range for conductivity ...
Features: ·Used for fast failure detecting of motor, electric fan, pump, air compressor, machine tools and so on. ·Compact size, small weight, easy handling ·Prompt testing of vibration on the workshop machines ·For quick checking of ...
●Optimization filter manner to keep the measuring accurate ●High Brightness backlight for clear reading ● Large measuring range, displacement up to 1.999 ●Analyzer of acceleration, velocity, displacement ●Three display modes Common mode display any
To check the tightness of the cylinders Pressurization of the volume to be controlled and measurement of the pressure loss induced by the leakage rate. This loss of load is expressed in percent, zero being the perfect tightness. Entrance: ...
•Reproducible measurement of wear and scratching restistance •Fast and easy measurement of layer thickness •Comfortable operation •Suitable for hard material films, lacquers, plastic coatings etc. •For quality assurance and coating ...
... ring stiffness tester is used to determine the ring stiffness of circular cross-section thermoplastic pipes, according customer’s request, it can also execute compression, ring stiffness, ring softness and creep ratio ...
Beijing United Test Co., Ltd.
The pipe opacity tester can be used to determine the impermeability determination of plastic pipes and fittings (showing results as a percentage). The instrument is controlled by an industrial touch screen and operated ...
Beijing United Test Co., Ltd.
The GBS-60 model is a digital display Erichsen cupping tester that is ideal for use testing the ductility of metallic sheets and strips. The unit has been developed to comply with the ISO 20482:2003 standards. It has ...
Beijing United Test Co., Ltd.
Approved leakage testing system for differential-pressure method or relative-pressure method. • 64 test programs storable • text indicator on the LCD-display in different languages • with statistical evaluation ...
Dr. Wiesner
Cost-efficient single-purpose leakage testing device for differential-pressure method or flow testing • available in many variants • for overpressure or vacuum • serial interface RS232 as standard • optionally including ...
Dr. Wiesner
Cost-efficient single-purpose leakage testing device for relative-pressure method for overpressure or vacuum • compact size • serial interface RS232 as standard • optionally including digital I/O interface The leakage ...
Dr. Wiesner
... Listing Battery Impact Tester Sonacme technology's battery impact tester tests the safety of the battery through different weights, different heights and different impact areas. After a series of tests ...
Mask Synthetic Blood Penetration Tester GT-RA01 Product Introduction Application: Mask Synthetic Blood Penetration Tester determine the resistance of medical protective masks to the penetration ...
GESTER
• Automatic ferrous / non-ferrous substrate material measurement • Non-magnetic coating on ferrous metal substrate and insulating coating on non-ferrous metal substrate measurement • Audible and visual warning when tolerance limits ...
TES Electrical Electronic Corp.
• Test Condition Without Shutting Down Battery. • Simultaneously Measure Battery Resistance, Voltage, Current, Temperature. • Auto-hold and Auto-data storage. • Comparator Function. • Rates Conditions as Pass, Warning, or Fail. • ...
TES Electrical Electronic Corp.
• Test Condition Without Shutting Down Battery. • Simultaneously Measure Battery Resistance, Voltage. • Comparator Function. • Rates Conditions as Pass, Warning, or Fail. • Compact and Lightweight.
TES Electrical Electronic Corp.
TL-CF2 is a Flame Detector tester for UV/IR and IR3 Model to verify its response within a short distance. • Approval for Explosion-Proof • Portable device • Specialized for Rezontech UV/IR and IR3 type of flame ...
REZONTECH
TL-205 is a UV/IR Flame Detector tester to verify response of UV/IR type of Flame Detector within a short distance. • Portable device • Specialized for Rezontech UV/IR type of flame detector • Suitable for hazardous ...
REZONTECH
TL-3000 is a IR3 Flame Detector tester for RFD-3000, RFD-3000X Model to verify its response within a short distance. • Portable device • Specialized for RFD-3000, RFD-3000X Models • Suitable for hazardous areas ...
REZONTECH
... impact testers, drop testers or high-speed testing machines), the rotational impact tester stands out due to its high testing speed and its high impact energy, at a comparatively small ...
Stone impact tester Test stand for stone impact tests on car radiators This stone chip tester can be used to test large components in particular, such as car radiators. The test stand is tightly ...
Hydrostatic Pressure Tester Overview JJHBT is mainly used to determine the resistance of thermoplastics pipes and short-time hydraulic burst to constant internal water pressure at constant temperature. It is applicable ...
JJ-TEST Chengde Jinjian Testing Instrument Co.,Ltd
Ring stiffness tester Overview This tester is used to determine the ring stiffness, compression, ring softness of thermoplastic pipes having circular cross-section. It conforms to the requirement of all ...
JJ-TEST Chengde Jinjian Testing Instrument Co.,Ltd
Falling Weight Impact Tester Overview The machine is widely used to measure the impact toughness of various plastic pipes (such as water supply and drainage pipes, sewage pipes, gas pipes, communication pipes, such as ...
JJ-TEST Chengde Jinjian Testing Instrument Co.,Ltd
The UT22B-EU voltage tester is a simple to use tool for electricians and DIYers to measure AC/DC voltage. This voltage tester is IP54 rated, and designed to withstand a 2-meter drop. The great thing about ...
UNI-TREND TECHNOLOGY (CHINA) CO., LTD.
... Provides instant, non-destructive tests on most powder products. Can also be used or purity testing. Replaces our C100 whiteness tester, generally recognized as the worldwide standard. Test a variety of applications ...
Kett US
Advanced Rice Grain Freshness Tester The “Freshness Meister” is a joint development between Kett and the Japan Grain Inspection Association. By placing polished rice in the measuring tray, adding color with a pH ...
Kett US
... Resistance Tester Used in peeling and tensile strength assessment. The H17 contains a test piece that clamps on both sides, moves at the same speed, and evaluates the resistance on the object. This adhesion and peeling ...
Kett US
The CRIT 100 controls the charge of static electricity and the insulation of operators and equipment before entering a pyrotechnical area, where user’s safety is at stake. Dual detection of resistance thresholds: • Maximum value ...
The HPT-200B Wire Crimp Pull Tester is a portable tool for making pull type force measurements to terminated wire samples, wherever they are required. The HPT-200B can be operated while plugged into wall power or by internal ...
Voltage testing: 12 V to 690 V~ (7 diodes) Impedance: 400 kΩ Operating frequency: DC and 50/60 Hz Polarity test with «+» and «-» diodes Protection up to 1,000 V IEC 61010 600 V CAT III Powered by 1 x 9 V 6LR61 battery
MULTIMETRIX
As a complement to the quality assurance measurement instruments, the RaySafe portfolio also includes a wide range of phantoms and other test tools. RaySafe offers a wide choice of phantoms for different applications. These phantoms ...
For determining seal strength as per EN 868-5:2009 AND ASTM F88. The Performance Qualification (PQ) carried out as part of the initial validation and for revalidation requires determination of the seal strength. Seal samples can be ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining