... x 2,6 cm (transmitter) ○ 10 x 2,6 x 2,5 cm (reciever) • Material Plastic • Color grey/ black The PRO-Multi LAN Tester is a practical companion for every network technician and installer. This handy tool makes ...
TDT1000 Transducer Diagnostic Tester TDT1000 and SensorCheck™ app, the guessing game is over. AIRMAR’s TDT1000, the first transducer diagnostic tester for use with most marine transducers, is the best ...
The online gloves Integrity Tester GT-2.0 is designed according to the positive pressure leak detector principle proposed by GB/T 25915.7-2010/ISO 14644-7:2004, and it is a dedicated instrument to detect glove leakage. ...
• Measuring range: 1E11 … 4E13 Ω • Logarithmic display • Very simple to operate • Battery powered Battery-operated service instrument for measuring very high insulation resistances up to 4 t 1013 Ω. Low measuring voltage and quickcharging ...
The new handheld tester allows DAG and engineers to quickly check vital functionalitles of sensors on the car. It takes dual analog inputs, data on two separated/independent displays, 3mV resolution, 5V and 12V regulated ...
The GrainStain 2020 is designed to carryout rapid staining tests on seeds, particularly barley and wheat. Precision control of temperature, vacuum and time allows carrying out staining under reproducible and standardised conditions. ...
T9731 for tests according to UNI EN 14683 standard ForTest instruments used in testing biomedical devices ForTest has decided to make its contribution in the fight against Covid19 by developing a new specific equipment for certification ...
The PGT®130DT is a compact test system for accurate testing and documentation of personnel grounding with shoes,wrist strap and ESD smock according to DIN EN 61340-5-1 as well as ANSI ESD S20.20 and further processing the measurement ...
VDE Mains testing screwdriver Single-pole phase tester up to 250 V a.c.
... multimeters, varistor testers, impulse discharge current generators, we also can design and produce test devices according to customer's requirements. 2. Introduction FPT18-I series intelligent lightning protection ...
The innovative LP-SPT™ RF surge protection tester can test any lightning protection device or component to ensure its proper functioning and capability to protect critical and expensive RF equipment. Weighing only 16 ...
The START International SM6000 Copper Thickness Tester instantly and precisely measures the thickness of copper foils. Measures 1/2 oz. (18 µ), 1 oz. (36 µ), 2 oz. (71 µ), and 3 oz. (107 µ). FEATURES • Lightweight ...
Non-Invasive, Non-Destructive, 100% in-line Integrity Inspection System Testing at high production speed for all pharmaceutical containers tested into dedicated Pucks Highlights Autotest in real time Easy to validate CFR 21 part ...
The Burst Pressure Tester is designed to determine deformation and bursting pressure of aerosol containers with 1” opening. Additional adapters are available to test aluminium containers with 20 mm openings or PET containers ...
Beamatic integrity test equipment is designed to enable the rapid reverification of the integrity of membrane filter cartridges. Beamatic can perform a variety of integrity tests including diffusion flow, bubble point, pressure drop ...
BeaTest is a portable device designed in a reliable and economical way to check the integrity of the membrane filter systems, using decay pressure test. The stored data can be loaded and printed when linked to any PC.
Glove Testing Highly accurate, traceable, and easy to use wireless glove test system to mitigate against sterile breach. • Glove Integrity Test System(GITS) software and hardware modules • Accurate and repeatable testing of glove ...
Batteries are a fundamental energy source for many critical applications, necessitating precise testing of their performance and reliability. Active’s TDB R (Test and Devices Battery Regenerative) series is a high-precision regenerative ...
● Accurate temperature measurement 0-800℃. ● Performance stable and easy to operate. ● IR temperature calibration. ● USB communication function. ● Automatic shut down function. ♦ Power on/off function. ℃/℉ is available ...
... from analog to digital via dual test window IP & CVBS CVBS loop test, the tester send and receive color bar generator signal to check BNC cable Traffic monitoring of the tester “Lan port”, display network ...
Pore size measurement of filtering material, filtration rating determination; Process fiber recipe, process method of filter material, and repeated tests for filtration precision research; Integrity check of filter element production; When ...
For 6-48 V LED displays the voltage in the area of 12, 24, 48 V as well as the polarity For work in confined areas IEC / EN 61010-1 (DIN VDE 0411) Measurements: 145 x 25 x 16mm Protection classification IP40, ...
The Condor-Rotatest indicates the phase sequence in a three-phase mains circuit and thus the direction of rotation for electromotive appliances. The additional phase monitoring glow lamps also indicate whether all the outer conductors ...
The unit is designed to measure the dielectric strength of transformer oil and other dielectric fluids according to IEC 60156, ASTM D877, ASTM D1816. It is a fully automatic device that allows testing according to the procedures defined ...
Handheld PROFINET Cable Tester PROFINET cable tester is an essential tool to verify the condition of the PROFINET cable after assembly and installation. It is a robust tester which has ...
... conductors are affected. Also, an audible beep will sound to indicate if the tested cable has passed or failed the test. The tester is battery operated and is supplied with a manual, battery and carrying case.
The Instaltest XE is an easy to use and compact combination installation tester according to NEN 1010, NEN 3140 and EN 61557. The tester has a huge number of options, each driven by separate accessories. ...
Please specify:
Help us improve:
remaining