... checking interface integrity is critical. Telstar ACE offers custom-built testing systems to enable fast, easy measurement of glove containment efficiency. The Telstar ACE Glove Tester is a low cost manually ...
• AC and DC voltage tests up to 690V with LEDs and LCD • Comply with the latest standards IEC 61243 and IEC 61010 • Novel design Large and bright LEDs: Values are visible in the dark place Ergonomic design fits in the hand • Two functions ...
Kyoritsu
– For checking all commonly used batteries (AA / AAA / C / D / E-block / button cell – small) – Easy to read, 3-colour scale to display the battery charge level – Easy to use with sliding battery holder and clearly accessible contacts ...
Laserliner
The simple compact tester with 4.3‘‘ colour TFT display. The LG 1800B is your perfect entry into the world of multifunction safety testers. The device concept is most suitable for all requirements ...
SPS electronic
Installation and repair of voice, broadband and ultra-broadband deployments The MaxTester 635G (MAX-635G) is a complete DSL & copper test set featuring the latest in ADSL2+, VDSL2, and G.fast (ITUT G Series 9700 and 9701 recommendations ...
EXFO
Insulation Tester PE-455 makes the insulation test at rated voltage into a 1 mA load, with user-selectable ranges for resistance and insulation resistance.
PROMAX ELECTRONICA
Re-defining rapid safety testing, the Transmille 6080A battery powered portable appliance tester provides simple, fast and safe PAT testing for both independent contractors and in house safety testing. An ideal solution ...
TRANSMILLE
This Battery tester has been designed to estimate the autonomy of a battery for different loads. The role of the batteries is essential for all electrical prospecting surveys with a resistivity-meter and particularly ...
Iris Instruments
- Combines all PV electrical test functions into one tester - Records irradiance and temperature simultaneously to electrical tests being conducted - Stores up to 200 complete test records - USB download ...
SOLAR SEAWARD
... test results - Tests installed twisted pair wiring - Tests unshielded and shielded modular plugs The LinkMaster™ Tester consists of two units. The main unit is connected to one end of the cable to be tested ...
IDEAL NETWORKS
Locate cables fast Trace longer cables using the industry leading power output. Solve issues faster with power supply for external talk sets. Verify cabling with polarity and continuity. Easy to use and requires ...
IDEAL NETWORKS
... Determines services running: ISDN, PBX and PoE - RJ-11, RJ-12, RJ-45 and COAX ports The VDV II Series are easy to use cable testers that check the integrity of copper cables commonly found in domestic, commercial ...
IDEAL NETWORKS
500VA AC Test Capacity 240x64 Ice Blue Dot matrix LCD Sweep Function for DUT characteristic analysis Insulation resistance measurement up to 50GΩ(GPT-9903/9904) Manual/Auto Mode Function Key for quick selection ...
Instek
The D2020 Density Tester offers fully automated density testing. Features AUTOMATED 20 SAMPLE QUEUE - to eliminate operator influence over the data and increase testing efficiency SPECIFIC GRAVITY / DENSITY CURED ...
Alpha Technologies U.K.
AMSE Ball Drop Tester XJB-30 Ball Drop Tester mod. XJB-30 AMSE Ball Drop is compliant with methods described in ISO 7765, ASTM D1709 and other equivalents. Instrument for impact tests on plastic ...
AMSE
930i Ground Bond Tester and AC Low-Ohm Ohmmeter Depend on Vitrek’s 930i, Ground Bond Tester and AC Low-Ohms Ohmmeter, for all of your programmable or manually operated electrical safety compliance tester ...
Vitrek
Product Description The PST 100 Spark Tester provides a quick and cost effective method of inspection on thick coatings and linings. Coating thicknesses of between 3 and 30mm can be tested. It can be widely used ...
... solution is easy to apply Glove tester trolley The trolley of the Litek Pharma Glove Tester allows easy transport of the devices. • Port on the trolley for Glove Tester calibration. • ...
Voltage Tester provides non-contact detection of voltage in cables, cords, circuit breakers, lighting fixtures, switches, non tamper-resistant outlets and wires Volt Pen with high intensity, bright green LED that ...
Klein Tools
Based on a technical problem, we will develop a concept for you to record the required quantities. Our spectrum ranges from small manual test systems to fully automatic test systems. We offer special testing facilities in the following ...
VIARIS TESTER is an Electric Vehicle (EV) Specific Power System tester, enabling several functions of EV chargers to be tested by simulating the connection of an electric vehicle. It ensures correct ...
... and 0,3 mm/s without interruption. Especially with thicker steel panels hand-operated testers not always allow an uninterrupted deformation. The Automatic cupping tester is driven by a micro-step controlled ...
TQC Sheen BV
Revolutionary apparatus for testing the resistivity of coatings at various stages of deformation in accordance with ISO 1520. The built in gear-box minimizes the manual force which is required to deform the test panel, allowing to perform ...
TQC Sheen BV
The TQC Bend Test Conical Mandrel "Pro" is a laboratory apparatus to bend coated test panels over a conical shaped mandrel in order to assess the elasticity or resistance of a coating-, paint or varnish to cracking, elongation and/or ...
TQC Sheen BV
With its high-energy broadband radiation source, the battery-operated FlameGard® 5 Test Lamp is precision-designed to test MSA's FlameGard® 5 MSIR, UV/IR, and UV/IR-H2 Flame Detectors. The rechargeable test lamp provides a radiation source ...
The TR5001E SII provides an economical, customizable solution that can fully meet the testing requirements of most customers. The TR5001E SII incorporates MDA with selectable ICT and Functional test capabilities that cut production line ...
If you search for a device that is made for transportability and use on-site, the combined Mini-Charger-Tester is the natural choice. The device simulates vehicle signals of the charging standards DC-CCS and/or CHAdeMO, ...
In case your focus is on End-Of-Line (EOL) testing in production you should opt for this tabletop version: it‘s designed to be operated with an End-of-Line test bench to find out if the EVSE is working as expected. Of course the tabletop ...
Your demands are even higher? If your focus is on End-Of-Line (EOL) testing with high power charging, the Mini-Charger-Tester EOL HPC can still be installed in a single, rollable rack for loads of up to 120 kW. If you ...
... environmentally responsible way to test your ARFF vehicle’s foam system. The ECOLOGIC® mobile test system is an input-based testing system designed to provide fire departments the means to test the accuracy of their ...
This is a high-precision and high-performance battery tester. It can set parameters in the computer software. It can charge and discharge various batteries for testing battery capacity/voltage/current, and do battery ...
MIT flexure tester is a new instrument developed by our company according to the national standard GB/T 2679.5-1995 (determination of flexure of paper and cardboard). The instrument has the standard in the parameter test, ...
Please specify:
Help us improve:
remaining