- Electricity - Electronics >
- Switch and Relay >
- Surge arrester >
- HUBER
HUBER surge arresters
Voltage: 1,000, 600, 200 V
Primary current: 20,000, 900, 2,400, 1,600, 3,200 A
Voltage: 1,000 V
Primary current: 20,000 A
1. Description Fatech Type 2 DC surge arrester are are TUV approved, these DC surge protector 1000V SPDs are tested according to IEC61643-31 and EN50539. 2. Characteristics 1)DC ...
FATECH ELECTRONIC (FOSHAN) CO., LTD
Voltage: 220 V
Primary current: 30,000 A
1.Description Fatech Class I+II lightning and surge arresters, is suitable for TT and TN earthing systems. 3P+N construction lightning and surge arresters based on ...
FATECH ELECTRONIC (FOSHAN) CO., LTD
Voltage: 220 V
Primary current: 20,000 A
... FATECH Class II surge arresters have large discharge current value, high operating voltage, suitable for TN-C, TN-S, TT and IT grounding systems. The cartridges are pluggable design, could be changed ...
FATECH ELECTRONIC (FOSHAN) CO., LTD
IS-75BB/18 Baseband Coaxial Protector 75 ohm coaxial protector configured with BNC female connectors for dc to 30 MHz signals Specifications for PolyPhaser IS-75BB/18 Mount Type Flange Frequency Range dc to 30 MHz Protected Side Connector BNC ...
PolyPhaser | Transtector
Gas Discharge Tube (GDT) Surge Arrestors operate as a voltage dependent switch. When a voltage appears across the device that is greater than its rated DC breakdown voltage the gas in the GDT will begin to ionize and ...
BOURNS
Voltage: 3 kV - 55 kV
Primary current: 10,000 A
... moulded by silicone rubber. Installation The position for installing SNO and 2SS15N surge arresters is determinated by directives and technical regulations. Surge arresters ...
Izoelektro d.o.o.
Voltage: 1, 1.2, 1.5, 1.8 kV
Primary current: 10,000 A
NNO are low voltage metal oxide surge arresters with silicone coating. They are designed to be installed in LV power lines or in junction boxes up to 1 kV as the first level of protection against direct ...
Izoelektro d.o.o.
Voltage: 1.5 kV - 3 kV
Primary current: 15,000, 10,000 A
... in normal operation the current through the surge arrester increases over 1 mA or in case of atmospheric discharge (current bigger than 65 kA). Installation - The position for installing MOSIPO surge ...
Izoelektro d.o.o.
Voltage: 230 V
Primary current: 0 A
Lightning strike by lightning means a test to the radio equipment. The Voltage of Surge maybe as high as the dozens kilovolt/meter in the instant microseconds, this will bring the enormous load to the whole system and ...
Danyang Teruilai Electronics Co., Ltd.
Voltage: 230 V
Primary current: 0 A
Lightning strike by lightning means a test to the radio equipment. The Voltage of Surge maybe as high as the dozens kilovolt/meter in the instant microseconds, this will bring the enormous load to the whole system and ...
Danyang Teruilai Electronics Co., Ltd.
Voltage: 230 V
Primary current: 0 A
Lightning strike by lightning means a test to the radio equipment. The Voltage of Surge maybe as high as the dozens kilovolt/meter in the instant microseconds, this will bring the enormous load to the whole system and ...
Danyang Teruilai Electronics Co., Ltd.
Voltage: 120, 240, 277, 480, 600 V
Primary current: 20,000 A
... lightning surges and other overvoltage events. Only Raycap’s industrial surge protection technology, Strikesorb can provide uninterrupted protection from damaging lightning strikes and surge ...
Raycap
Overvoltage Protection: Power frequency overvoltage protection
GAVE ELECTRO
Voltage: 0 V - 335 V
Primary current: 20,000 A
Monobloc SPDs 12.5 kA (ref : 23111) Max. voltage Uc : 335 V AC Max. discharge current Iimp : 12,5 kA Nominal discharge current In : 20 kA Level of Up protection under In : 1,3 kV
Voltage: 0 V - 440 V
Primary current: 40,000 A
Multipolar SPDs 40 kA (ref : 23201) Max. voltage Uc : 440 V AC Max. discharge current Imax : 40 kA Nominal discharge current In : 15 kA Level of Up protection under In : 2 kV
Primary current: 5,000 A - 10,000 A
Efen ow-voltage surge arrester device is constructed with nominal discharge current range of 5 to 10 kA, installed within overhead line grid systems. It is enhanced with a metal-oxide varistor gear, and ...
... DEHN NH surge-protection-device, as a part of our EFEN NH surge-protection-rail, you have the perfect combination for surge protection at your disposal. FULL PACKAGE With our set ...
Primary current: 5,000 A - 100,000 A
Surge protections are manufactoring for protect the electrical machines which are faced with high voltage due to lightning. It provides full protection with opportunity of assemblying to main panels which are very high, ...
Voltage: 220 V - 500 V
Primary current: 50,000, 12,500 A
... characteristics ● Checking of power status and functional loss of surge protective device via LED ● MOV Fault Alarm function ● RS-485 Communication function ● Single MOV type high surge energy treatment ● ...
VitzroEM Co., Ltd.
Voltage: 220, 380 V
Primary current: 25,000 A
... characteristics ● Checking of power status and functional loss of surge protective device via LED ● MOV Fault Alarm function ● RS-485 Communication function ● Single MOV type high surge energy treatment ● ...
VitzroEM Co., Ltd.
Voltage: 400, 230 V
Primary current: 40,000 A
... main power supply Features ● LED operating status display ● RS-485 Communication Counter ● Mov Fault Alarm(Option) ● Surge Counter(Option)
VitzroEM Co., Ltd.
Voltage: 72.5 kV - 550 kV
Primary current: 20,000 A - 65,000 A
... maintenance-free operation of 3EL surge arresters. They are also lightweight, allowing for easy transport and a variety of installation options. 3EL surge arresters are ...
Siemens High-voltage – Power transmission
Voltage: 2, 6 kV
Primary current: 26 A
... caused by lightning strikes, electrostatic discharges or power grid switching operations, and are extremely hazardous. Such surges can cause electrical systems to fail, destroy electrical and electronic equipment, or ...
Siemens Low-voltage – Power distribution
Voltage: 120 V - 600 V
Primary current: 200 A
... rating, Eaton's SP2 series surge protective device are ideal for type 1 and 2 applications where dependable performance is required. Made for any environment A compact UV-resistant NEMA 4x enclosure means this ...
Eaton Count Control Products
Voltage: 6 kV - 500 kV
... Distribution type arrester -Condenser arrester -Motor type arrester -Substation type arrester -Transmission line arrester -Electrified ...
Voltage: 320, 300, 600, 1,100, 1,500 V
Primary current: 20,000, 5,000, 15,000 A
Surge protection device type 2 with plug-in cartridge, rated discharge current In (8/20μs) 20kA per pole, 1P+N •Type of product: SPD •Type of system: 230/400VAC •Type / Class: 2 •Number of poles: 1P+N •In [kA]: ...
LOVATO ELECTRIC
TheSSLP-VB Signal surge protector is designed according℃relevantrailway standards.lt is a type Of signal surge protector.lts pefformance complies withthe CRCC testing standard Of the ...
Shenzhen Keanda Electronic Technology Corporation
Voltage: 7, 16, 32, 55 V
Primary current: 700 mA
Introducing the MTL SD Modular (SDM) range of data & signal surge protection providing the ultimate surge protection solution for process automation, instrumentation and communications networks. The ...
MTL INSTRUMENT
Arc Suppressor Decrease maintenance costs, increase contact reliability/dependability, and reduce destructive dc circuit overvoltages by applying the self-powered SEL-9501 Arc Suppressor to dc circuits.
Schweitzer Engineering Laboratories
Voltage: 5 V - 170 V
... Voltage Suppressors are designed to protect sensitive electronic components from high voltage, high-energy transients. High surge capability, low impedance, low clamping voltage, fast response time and small size make ...
Central Semiconductor
Voltage: 264, 255 V
Primary current: 25,000, 50,000, 100,000 A
High discharge capacity due to powerful creepage discharge spark gap Maximum system availability due to RADAX Flow follow current limitation Easy replacement of protection modules without tools due to module locking system with module ...
DEHN + SÖHNE
Voltage: 3 kV - 36 kV
CG Porcelain housed (ZYPD) distribution surge arresters are used on distribution systems to protect transformers and other medium voltage power equipment from lightning and switching surge ...
CG Power Systems
Voltage: 280 V
Primary current: 20,000 A
ETITEC surge arresters protect electrical installations and devices against overvoltage effects which may occur in switching overvoltages and atmospheric discharges. The ZnO non-linear varistor is the ...
ETI
Voltage: 280 V
Primary current: 50,000 A
Combination arrestor set, lightning and surge arrestor Type 1+2 to DIN EN 61643-11 (B+C to VDE 0675 part 6). • For lightning protection equipotential bonding to VDE 0185-305 (IEC 62305) • ...
OBO Bettermann
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining