- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Fitting >
- HUMMEL
HUMMEL fittings
Diameter: 3 mm - 14 mm
Operating pressure: 0.5 bar - 12 bar
Series of push-in fittings with reduced dimensions and new collet and release collar. They are for connecting nylon and polyurethane tubes. Available in various configurations (studs, elbows, T, Y) and with threads Gas ...
Diameter: 2.5 mm - 15 mm
Operating pressure: 0.5 bar - 12 bar
Series of rapid fittings for connecting nylon and polyurethane tubes. They should be used in all those applications where a safer tube-fitting connection is required. Available in various configurations ...
Diameter: 0.125 in - 1 in
Operating pressure: 0.5 bar - 12 bar
Series of standard fittings available in various configurations to adapt the connections of every installation according to one’s requirements. With threads Gas taper (BSPT) and Gas parallel (BSP).
Diameter: 18, 20, 12, 16, 10 mm
Operating pressure: 1,200 bar
Standards adaptors are also available individually. If among our standards adaptors or high pressure adaptors you don't find what you are looking for, our Design Office remains at your disposal to design and manufacture the adaptor ...
AREMECA
Operating pressure: 100 psi
Barbed fittings with Orifice Insert These barbed fittings feature an integral precision orifice. SPECIFICATIONS ACCURACY: See “Precision Orifices” MATERIAL: FDA Approved Polysulfone/Polycarbonate MAX. ...
Operating pressure: 100 psi
Barbed fittings with Orifice Insert Barbed fittings with Orifice Insert These barbed fittings feature an integral precision orifice. Specifications ACCURACY: See “Precision Orifices” MATERIAL: ...
Completely raparaible and disassemblable - Pressurized and depressurized connectable - Suitable for fluids and gases - Functional parts - high strength stainless steel - Mounting into individual contour - Flow optimized (real diameter) - ...
MECHANISM / NIPPLE, ND 6/10 UP TO 250 BAR These coupling elements can only be mechanically coupled and are used to transfer liquid and gaseous media. - Pressurized and depressurized connectable - Suitable for fluids and gases - ...
Diameter: 40 mm - 400 mm
Reusable aluminum coupling system, suitable to be fitted to MARMOTECH® and STEELBLAST hoses,including: • Aluminum semi-flanges according to UNI EN 1092-1 PN 10 (ex UNI 2277) • Flat black SBR gasket • Bolts, nuts ...
Diameter: 9 mm - 27 mm
90° brass elbow with metallic continuity IP67 Connection type screw connection to housing Thread Construction type External thread Degree of protection (IP) conduit dependant 67.00 Material housing Brass Model 90°-Bend Surface ...
Teaflex S.p.a
Diameter: 4, 6 mm
Operating pressure: 10 bar
... Corrosion-resistant - High level of gas tightness - Material of sample-contacting parts: PVDF Hose and tube screw connectors as well as fittings of series 1 to 3 out of plastic are indispensable and well-proven accessories ...
M&C TechGroup Germany GmbH
Diameter: 6 mm
... with barbed fitting for flexible tube -Barbed fitting: DN 6 -Corrosion-resistant -High level of gas tightness -Material of sample-contacting parts: PP hose nozzles, G-ISO thread, material: PP Hose ...
M&C TechGroup Germany GmbH
Diameter: 8 mm
... barbed fitting for flexible tube Thread size: G 1/8" Barbed fitting Corrosion-resistant High level of gas tightness Material of sample-contacting parts: PP hose nozzles, G-ISO thread, material: PP Hose ...
M&C TechGroup Germany GmbH
Diameter: 10 mm - 100 mm
... large range of these Fixings & Fittings for Adjustable Feet in stock ready for free or next day delivery, along with free samples which can be sent out if you'd like to test suitability before placing an order. These ...
Diameter: 0.25, 0.13 in
SWIVELS These have single or double outlet connections for use with standard flanged nozzles and filters to enable positioning of sprays.
Pipe connectors Suitable for realizing watertight, current leading connections between high current pipes. Hexagonal design is standard. But on request also in octagon or as groove nut design deliverable.
Diameter: 5 mm - 100 mm
With the standard-fitting-system according to DIN ISO 12151-2 and DIN ISO 12151-3 we offer benefits to assemble swage fitting with the applicable ferrule with or without skiving, according to the standards ...
Quick couplings made of brass, steel and stainless steel Mono- and Multicouplings Flat-Face-Couplings Safety couplings Temperature control couplings Hydraulics, pneumatics, water, gas
KROMA MEC SRL
KROMA MEC SRL
Diameter: 0.25 in - 4 in
Exd IIC Conduit Seals prevent the passage of gases, vapours or flame through the Exd conduit system, from one part of t he electrical system to another. Threads: - BSP TAPER BS 21 - NPT (ANSI B1.20.1) Materials: ...
KROMA MEC SRL
Diameter: 3 mm - 14 mm
Operating pressure: 20 bar
The MA is our “Automatic push-in fitting” line. It enables quick connections with calibrated plastic hoses at any time, at any stage of the pneumatic circuit and by a simple hand movement. The connection and the fitting ...
C.Matic S.p.A.
Diameter: 6 mm - 18 mm
Operating pressure: 0 bar - 16 bar
The MT is the new push-in fittings line that has been developed and designed to ensure high reliability and safety in the pneumatic braking systems on commercial and industrial vehicles. The push-in fittings ...
C.Matic S.p.A.
Diameter: 0.156 in - 0.75 in
Operating pressure: 290 psi
Push in fittings for Vehicles applications complying with DOT FMVSS §571.106, SAE J2494-3 e SAE J1131 specs. 1-2 > Body and Release Ring: Brass UNI EN 12164 CW614N - UNI EN 12165 CW617N Nickel Plated 3 > Holding Ring: ...
C.Matic S.p.A.
Diameter: 40 mm - 1,600 mm
... wide range of flange fittings for almost every application includes single flange fittings F, double flange fittings FF, double flange bends FFK 11–45° and Q, flanged duckfoot bends N, ...
Düker GmbH
Diameter: 6 mm - 60.3 mm
Connecting two pipes Aseptic flange connection according to DIN 11864-2 with buttweld ends for orbital welding with O-Ring. Material: 316L (1.4435), Fe < 0.5%. Sterilizing temperature: 150°C. With marking of batch number, material, ...
CONNECTORS
Diameter: 11 mm
The system variacor®, patented internationally, allows, with these two joint-turning, to make flexible and directional all the rigid and semi-rigid pipes, whatever is their natures and applications. Cost saving : no more premature ...
MID - VARIACOR
Diameter: 11 mm
Operating pressure: 40 bar
Eliminates premature wear of the supply hose. Reduces muscle strain caused by the rigidity of the flexible, easy washing in places with difficult access. Durable, thanks to mechanical stainless steel components and Aluminium ...
MID - VARIACOR
Diameter: 7, 16, 11 mm
Essential for all the fields of maintenance and mechanical repair, cars, trucks, assembly lines... Also adapted to all the fields of maintenance and repair in general mechanics, truck garage, carrier, construction industry, shipyards, ...
MID - VARIACOR
Rubber Lined Pipes and Fittings Rubber Linings are a premium form of corrosion protection for some of the most severe chemical and abrasive environments. We have a wide range of rubber compounds in Natural and ...
Diameter: 4 mm - 6 mm
Operating pressure: 250 bar
... grease lubrication systems as an alternative to the regular fittings (nut+olive). The tube may be connected and disconnected repeatedly, and it will not affect the tube's performance. The fitting and ...
Diameter: 67 mm - 200 mm
... only produce compressed air piping system network, and this product is one of the components. This round cruve of elbow fitting is available for 63mm up to 200mm. Two pipe to pipe joints are need to connect to the ...
Zhejiang Compressed Fluid Transmission Engineering Co.,Ltd
... procedure • AUTOMATIC TIGHTENING LIMIT: contact between AR3-FORM® ring and fitting body because of the nut tightening effect compels the operator to stop tightening • CUTTING RING FITTINGS INTERCHANGEABILITY: ...
Rastelli Raccordi
TN 400 fittings have the following points of strength: • Minor change in cross section • Negligible pressure loss • Taper to DIN 3865 • Appropriate for extreme load conditions • Low tightening torque • ...
Rastelli Raccordi
With the offer of hose couplings, Rastelli Raccordi completes its product range. They are available in STANDARD and INTERLOCK versions The complete range is in carbon steel and, on request, in stainless steel Rastelli Raccordi accomplishes ...
Rastelli Raccordi
Diameter: 15 mm
... parts are made from brass With the use of plastic pipes, support sleeves are also required for the clamping ring screw fittings Technical details GTIN/EAN - 4011666503220 Article number - DGKE815035 Designation ...
Schneider Druckluft GmbH
The model 53 Socketweld fitting is designed to be socket welded directly to a 2” socket end. Possible configurations include welding to an industry standard “Sockolet” fitting, which is then welded to ...
Rohrback Cosasco Systems
Material specifications Shaped pieces: St 35 according to DIN 1629 Part 3 (1.0308) Flange: R-St 37-2 according to DIN 17100 (1.0112) Coating: Pure PTFE according to ASTM D 1457-78 Type IV and V Technical delivery conditions: according ...
LMP-fluorcarbon
Diameter: 10 mm - 80 mm
Threaded hose nozzles series SAS Threaded hose nozzles of SAS series are available in nominal diameters DN10 - DN80. By default they are manufactured and offered in stainless steel AISI 316L. The flexible solution for hose connections ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining