Lincoln stationary pumps

Flow: 2.6 l/h - 182 l/h
Pressure: 4 bar - 20 bar
Power: 25 kW - 70 kW

Reliable dosing of chemicals The new generation of the stepper motor-driven diaphragm dosing pump MEMDOS SMART provides a wide range of attractive solutions for demanding dosing tasks. The new stepper motor technology ...

Flow: 0.5 l/h - 15 l/h
Pressure: 3 bar - 16 bar
Power: 10 W - 29 W

Simple dosing pump in newest generation The MAGDOS LB solenoid-diaphragm dosing pump is a good-value alternative for simple and continuous dosing tasks. It is especially suitable for water treatment ...

Flow: 0.5 l/h - 15 l/h
Pressure: 3 bar - 16 bar
Power: 8 W - 25 W

... performance, the stroke frequency can be adjusted manually or via an external control contact. The dosing pump is compact and, thanks to the small mounting area, can be integrated into ...

Flow: 0 l/min - 380 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m

Diaphragm pumps Fluid connections: 1” 1/2 BSP Air connection: 1/2” BSP Max Suction Lift Dry: 5 m Max Suction Lift Wet: 9,8 m Max Solid passing: 8 mm Noise level: 78 dB Max Viscosity: 40.000 ...

Flow: 0 l/min - 35 l/min
Pressure: 0 bar - 7 bar
Head: 0 m - 70 m

Diaphragm pumps Fluid connections: 1/2" BSP Air connection: 6 mm Max Suction Lift Dry: 5 m Max Suction Lift Wet: 9,8 m Max Solid passing: 3 mm Noise level: 65 dB Max Viscosity: 15.000 cps ...

Flow: 0 l/min - 4 l/min
Pressure: 0 bar - 6 bar
Head: 60 m

Diaphragm pumps Fluid connections: 1/4” BSP Air connection: 4 mm Max Suction Lift Dry: 3 m Max Suction Lift Wet: 9,8 m Max Solid passing: 2 mm Noise level: 62 dB Max Viscosity: 5.000 cps Displacement per Stroke: 18 CC~

Flow: 44 l/min
Pressure: 150 mbar
Power: 150 W

Our innovative vapour recovery pumps ensure safe use at filling stations all over the world. No matter whether you use belt drive or direct drive - we have the right products for vapour recovery. Please contact us and ...

Flow: 392 l/min
Pressure: 320 bar
Power: 155 kW

... version, WOMA provides a reasonably-priced pump-head variant in grey cast iron. The design of the pump allows easy dismantling of the valve parts and the pump head does not have to be ...

Flow: 466 l/min
Pressure: 320 bar
Power: 184 kW

... version, WOMA provides a reasonably-priced pump-head variant in grey cast iron. The design of the pump allows easy dismantling of the valve parts and the pump head does not have to be ...

Flow: 537 l/min
Pressure: 340 bar
Power: 240 kW

... version, WOMA provides a reasonably-priced pump-head variant in grey cast iron. The design of the pump allows easy dismantling of the valve parts and the pump head does not have to be ...

Pressure: 6.3 bar
Head: 25, 41 m
Output diameter: 65 mm

The Rami Yokota BV YP-18 is a sump pump made from bronze, to pump aggressive fluids such as sea water. It can accommodate maximum capacity of 55 t/h and can exhibit maximum air pressure of 6.3 bar. Furthermore, ...

ASCO CO2 Transfer Pumps have steel housings and long life shaft seals. The pumps have hardened steel gears and thrust washers to give long service life. The mechanical seal fitted provides leak free operation. These ...

Flow: 0 m³/h - 19 m³/h
Pressure: 0 bar - 1,200 bar
Power: 0.1 kW - 35 kW

... versatile pump offers low life cycle costs and impressive energy efficiency. A true all-around talent for various applications. Thanks to the tried-and-tested modular system, ecoflow diaphragm metering pumps ...

Flow: 0 m³/h - 6 m³/h
Pressure: 0 bar - 500 bar
Fluid temperature: -20 °C - 150 °C

... meter pumps in sanitary/hygienic design can also be configured with various pump heads and drives for almost all applications as food pumps and pharmaceutical pumps. We ...

Flow: 0 m³/h - 9 m³/h
Pressure: 0 bar - 500 bar
Fluid temperature: -70 °C - 400 °C

packed plunger metering pump Its sophisticated modular system makes the LEWA ecoflow packed plunger metering pump the cost-efficient option for pumping fluids. For the LEWA ecoflow packed plunger ...

Flow: 825, 800 m³/h
Head: 129 m
Power: 90 kW

STANDARDISED MONOBLOC ELECTRIC PUMPS An incredibly extensive and efficient range which provides a flexible response to market requirements thanks to the numerous versions available with incredible delivery times. Compact ...

Flow: 2,300, 1,700 m³/h
Head: 97, 120 m
Power: 400, 500 kW

PUMPS FOR HIGH FLOW RATES Single-stage end-suction centrifugal pump, body with dimensions meeting and exceeding EN 733. Ideal for applications where very high flow rates are required, such as irrigation ...

Flow: 5,000, 4,500 m³/h
Head: 210, 318 m
Power: 900, 1,200 kW

SPLIT-CASING PUMPS Our extremely short delivery times prove it: SKD is the split-casing range, extremely reliable and efficient, and designed, manufactured and tested in Italy. It is able to meet the needs of numerous ...

Flow: 4,000 m³/h
Head: 0 m - 200 m
Fluid temperature: 80 °C

The ClydeUnion Pumps Uniglide-e range is the latest generation of axially split, double entry pumps. The range has been developed using the latest 3D and FEA analysis software together with extensive ...

Flow: 2,800 m³/h
Fluid temperature: 180 °C

... thermal shock. The CUP-BB5V range has been designed to produce an advanced pump with reduced whole life costs. All the pump internals can be withdrawn quickly without disturbing pump ...

Flow: 3,000 m³/h
Fluid temperature: 230 °C

The ClydeUnion Pumps CUP-BB3 pump is a heavy duty axial split case horizontal, pump with opposing impellers with either single or double suction first stage impeller pumps. ...

Flow: 0.003 l/min
Pressure: 150 mbar
Weight: 40 g

... mechanisms, and thus minimal vibrations and fewer breakdowns. The Bimor is lighter, quieter and more durable than traditional pumps. We have achieved maintenance free continuous operation for 60 months. Low power consumption ...

Flow: 0.2, 0.25 l/min
Pressure: 170, 180, 350 mbar
Weight: 140 g

The Bimor’s driving force, the bimorph, comprises two parallel piezoelectric wafers. Their nature is to expand or contract depending on the direction of the voltage. Therefore, when an alternating current is applied, one wafer expands ...

Flow: 0.1 l/min
Pressure: 0 mbar - 1,000 mbar
Input diameter: 4.7 mm

The DPE-100 is a diaphragm DC liquid pump with rated voltage of 24 V and a flow rate is 100 ml/min with working pressure range 0 - 1000 mbar. The outlet pressure range is 3 bar and the self-priming pressure is 200 mbar. ...

Flow: 1,800 m³/h
Pressure: 16 bar
Head: 140 m

Pumps of the series SIHISuperNova ZLN are horizontal, single-stage volute casing pumps with connections and main dimensions to DIN 24255 / EN 733, plus 19 additional sizes. The design of the pump ...

Flow: 0 m³/h - 3,500 m³/h
Pressure: 0 bar - 6 bar
Head: 33 m

... volute-casing pumps can be used where the requirement is for pumping clean, turbid or slightly contaminated liquids. Occasional solid contaminations can be handled without affecting the pump due to the ...

Flow: 100 l/min
Pressure: 10 bar
Fluid temperature: 40 °C

... secure the minimum flow of the pump. The well-known reliability of the side channel pump is combined with the safe use and the simple design of a submersible pump. An optional intelligent ...

Flow: 4 m³/h - 150 m³/h
Pressure: 18, 24 bar

... time required so far. NEMO® progressing cavity pump: Save costs due to FSIP® design In block construction with a flanged drive, this NEMO® pump is particularly compact and economical. ...

Flow: 0.0024 m³/h - 300 m³/h
Pressure: 8, 24, 12, 18 bar

... progressing cavity pump even difficult substances can be conveyed gently and with low pulsation, regardless of fluctuations in pressure and viscosity. Low costs with the NEMO® BY progressing cavity pump In ...

Flow: 0.003 m³/h - 350 m³/h
Pressure: 72, 60, 48, 36, 24 bar

... The pump is ideally suited for high-pressure applications. Four different rotor/stator geometries are available, enabling the pump to be customized perfectly to your application case. Furthermore with ...

Flow: 14.81 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C

... control units for M series with filter pressure regulator, control pressure gauge and shut off valve: M4(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve ...

Flow: 7.07 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C

... units for M series with filter pressure regulator, control pressure gauge and shut off valve: M8(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be ...

Flow: 4.55 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C

... units for M series with filter pressure regulator, control pressure gauge and shut off valve: M12(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be ...

Flow: 0.01 l/min - 16.64 l/min
Pressure: 0 bar - 200 bar
Power: 0.02 kW - 2.53 kW

ZPD external gear dosing pump Our most flexible line of external gear pumps, the ZPD has been used in countless applications the world over. Various modifications can be optimised customer-specific to ...

Flow: 0 l/min - 5.2 l/min
Pressure: 0 bar - 200 bar
Fluid temperature: -20 °C - 150 °C

ZPDA external gear pump ZPDA pumps are specifically designed for start-stop dosings. The low pulsation gear design provides constant flow with very rapid pressure build-up. Internal clearances based ...

Flow: 0 l/min - 1.2 l/min
Pressure: 0 bar - 150 bar
Fluid temperature: -20 °C - 150 °C

External gear pump DARTec® The DARTec® gear pump was specifically designed for high precision dosing of thermally reactive fluids. Its protected sealed needle bearing system eliminates material contact ...

Flow: 244 l/s - 281.2 l/s
Head: 1 m - 82.7 m
Power: 3 kW - 45 kW

Cast iron impeller with Molib-tech treatment™ / Chopper sistem able to cut particles of any shape of proportion Liquids containing solid parts and fibres Suitable for sewage, lifting of not strained black water

Flow: 401, 462 l/min
Head: 10.2, 11.6 m
Power: 0.3 kW - 0.74 kW

... seals in silicon carbide and alumina graphite in oil sump, and V-ring in direct contact with the liquid. Ecological dry motor. Pump body in single casting with motor casing.

Flow: 0.35 l/min
Pressure: 10 bar
Power: 0.09 kW

This oil gear pump is an oil control unit with a 3 l reservoir. It is comprised of a gear pump which sucks the lubricant from reservoir bottom (oil). After the pump, there is also a ...

Pressure: 4 bar
Power: 2, 2.5 W
Fluid temperature: 30 °C - 30 °C

... on lubrication systems, with a working pressure of 4 bar This range of pumps is particularly suitable for use on lubrication systems, with a working pressure of 4 bar. The pump can be provided with ...

Pressure: 3 bar

Two-outlet piston pump with pin valves for setting the flow. Placed in a central position with respect to the two out-let lines, it allows system extension. It may operate on a single line while the other line is plugged, ...

Flow: 0 m³/min - 0.35 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW

... portable drainage pump. An innovative electrode type relay unit attached to the pump automatically starts and stops the pump to eliminate dry-running. This mechanism greatly reduces power ...

Flow: 0 m³/min - 1.5 m³/min
Head: 0 m - 40 m
Power: 1.5 kW - 3.7 kW

... submersible three-phase automatic cast iron high head heavy-duty drainage pump. An innovative electrode type relay unit built into the pump automatically starts and stops the pump to ...

Flow: 0 m³/min - 0.24 m³/min
Head: 0 m - 14 m
Power: 0.55 kW

The HSD pump is a submersible single-phase portable slurry pump. It is equipped with a high-chromium cast iron agitator that assists smooth suction of the settled matters. Though the pump ...

Flow: 5,000 l/h - 14,000 l/h

... directly into the bowl. Driving the centrifuge directly from the motor minimizes energy lost in the process, enables more compact designs and reduces the maintenance that gear-or belt-driven systems might require otherwise.

Flow: 30 us gal/min
Pressure: 10 bar
Fluid temperature: 149 °C

Mixers And Blenders / Shear Pumps Designed for "on-line" continuous shearing and mixing action. FEATURES A choice of modularly interchangeable stators and rotors makes it versatile for processing a wide variety ...

Flow: 1.8 m³/h - 150 m³/h
Pressure: 150 psi - 500 psi
Fluid temperature: -40 °C - 149 °C

PUMPS / POSITIVE DISPLACEMENT PUMPS The Waukesha Universal 2 Series positive displacement pumps include advanced sanitation technologies, long life features and installation flexibility. ...