- Hydraulics - Pneumatics >
- Valve >
- Check valve >
- Mival
Mival check valves
Pressure: 0 psi - 235 psi
Temperature: 5 °F - 210 °F
... Fast Closure • Extremely Light Weight Cla-Val Series 501A Wafer Swing Check Valve has a quick, spring-assisted closure that minimizes the possibility of water hammer. The swing check ...
CLA-VAL Automatic Control Valves
Temperature: 0 °F - 250 °F
... Series Silent Wafer Check Valve has a spring-loaded poppet that allows the valve to close before flow reversal occurs, resulting in a silent, non-slam closure. It is a truly silent check ...
CLA-VAL Automatic Control Valves
Pressure: 0 psi - 400 psi
Temperature: -40 °F - 140 °F
... the pilot control. The integrated check feature protects upstream equipment like pumps by admitting downstream pressure into the main valve cover chamber, closing the main valve upon ...
CLA-VAL Automatic Control Valves
Pressure: 0 bar - 350 bar
— The VSK* valves are shuttle type, cartridge version and it can be used in panels and blocks. — The valve select the higher pressure signal between “1” and “3” through ...
Duplomatic Oleodinamica
Pressure: 0 bar - 670 bar
... 10,000psi(670bar) The Alco Valves Non Return Valve is designed for higher flow and low pressure drop across the valve - having a larger through bore than most other ...
Alco
Pressure: 0 mbar - 600 mbar
Temperature: 20 °C
Operating: the manual pressure gauge valve enables, by pushing the button, to check the existing pressure when testing the system. By releasing the button, the valve automatically closes; ...
DN: 0.75 in - 1.25 in
Pressure: 6 bar
Temperature: 130 °C
Gravity circulation checks SBO for sanitation and heating SBO gravity circulation checks are installed downstream of circulating pumps in heating and hot water systems, to prevent gravity circulation. They ...
GESTRA AG
Pressure: 0 psi - 4,500 psi
High flow, zero leak, low pressure drop check valve suitable for most fluid and gas applications. Fully guided poppet with free floating O-ring design is extremely tolerant of particulate contamination. ...
Generant
LENGTH OF INSTALLATION ACCORDING TO DIN 3202 F1 column. material specifications Shaped pieces: St 35 seconds DIN 1629 Part 3 (1.0308) Flange: R-St 37-2 according to DIN 17100 (1.0112) Coating: PTFE according to ASTM D 1457-78 ...
DN: 15 mm - 250 mm
Pressure: 10 bar
Temperature: -10 °C - 100 °C
housing, water distributions, protection of drinking water networks PRESSURE PFA/PS in bar θ 80° 2 drilled bosses 1/4 with POM (polyacetal) plugs GUIDING + CLOSING SYSTEM : POM or PPO (Polyphenylene oxyd) or PA SEAL : NBR or EPDM
SOCLA
DN: 0.25 in - 0.75 in
Pressure: 10 bar
Temperature: -10 °C - 80 °C
CASING : brass GUIDING + CLOSING SYSTEM : POM (polyacetal) SEAL : NBR (nitrile) or EPDM lip-ring SPRING : stainless steel
SOCLA
DN: 0.5, 0.75 in
Pressure: 10 bar
Temperature: -10 °C - 80 °C
housing, water distributions, industry PRESSURE PFA/PS in bar T°C 80° 1 downstream boss drilled 1/4 POM (polyacetal) plug GUIDING + CLOSING SYSTEM : POM (polyacetal) SEAL : NBR (nitrile) or EPDM lip-ring
SOCLA
DN: 19 mm - 65 mm
Pressure: 250, 315, 400 bar
... BSP cylindrical internal threads Sealing form 1 + 2 Shape A Construction straight Design Non-return valve, connector Material Steel Surface electro galvanised
DN: 0.75, 0.5, 0.375, 0.25 in
Pressure: 0 bar - 210 bar
Temperature: -20 °C - 100 °C
Media Mineral oil Note These valves must be set according to the application.
DN: 6 mm
Pressure: 500 bar
Shut-off valves and spring-loaded seat valves from STAUFF: Check valves with metallic seal for tube installation with SP, NPT or UN/UNF female thread. Allow flow in only ...
DN: 10 mm - 50 mm
Pressure: 138 bar
Temperature: -29 °C - 425 °C
Body material Steel A105N Disc material Stainless steel 410 Connection SW Seat Stellited stainless steel 410 Working pressure 800 Lbs
TECOFI
DN: 0.5 in - 2 in
... Piece, Standard Port, Threaded One-Way Bronze Ball Valves w/Integral Check feature a cam lock smart ball check valve insert manufactured from polymer materials, NBR rubber ...
Watts Water Technologies
DN: 0.375 in - 4 in
Pressure: 8, 10, 16 bar
Temperature: -10 °C - 110 °C
... series brass check valve is of female/female type. An arrow provides indication for respect the flow direction. It has a nylon throttle. The double axial and lateral guidance ensures the throttle is accurately ...
SFERACO
DN: 10 mm - 20 mm
Pressure: 250 bar
Flow direction: D2 -> D1, D3 closed; D3 -> D1, D2 closed
... control valves These valves are designed to regulate the cylinder piston speed Check valves Full flow in one direction flow blocked in the opposite direction Pilot-operated ...
... reliably protected from contamination by reflux prevention Improvement of residual drainage by pump attached to the outlet valve Suitable for all non-sticky, low-viscosity filling goods and also for sensitive ...
DN: 0.125 in - 1 in
NON-RETURN VALVES With possibility for connecting relieve pipe. Can be mounted horizontally and vertically.
... pumping plants, it prevents the liquid from flowing back in case the pump is deactivated. The valve is closed by its own weight or by counter force. Check valves should be installed by ...
Pressure: 300 Pa
Temperature: -20 °C - 80 °C
Description Check valves are destined generally as a security system to avoid that the pressure in the hydraulic circuit can invert the fluid direction, generally oil. For more information on our check ...
DN: 2 in - 36 in
... M & J Swing Check Valve is a one-piece body, top entry design for reliable operation and extended seat seal life. Top entry construction allows field service and in-line maintenance, if necessary. All ...
DN: 1 in - 20 in
The patented "floating piston" rides up and down in the cylinder with flow surges. As flow pressure is reduced, the piston softly settles on the seat to prevent backflow. Opening and closing actions are positively controlled to minimize ...
DN: 3 in - 18 in
Copes-Vulcan has supplied check valves to the nuclear industry since the early 1970s. It is designed to provide positive shutoff even at low differential pressures. Features: 3-18 inch, Class ...
DN: 0.75 in
Pressure: 250 bar
Temperature: -54 °C - 204 °C
A screw-in,Cartridge-style,hydraulic check valve for blocking or load-holding device. Operation CV08-P0 allows flow from ① to ②, and blocks flow in the opposite direction. The cartridge has ...
Hydrabase
Pressure: 250 bar
Temperature: -54 °C - 204 °C
Flow rate: 76 l/min
... changes. Positive stops prevent springs from going solid. Compact size. Adjustments cannot be backed out of the valve. Industry common cavity. Hardened poppet and cage for long life. Flow: ...
Hydrabase
Pressure: 420 bar
Temperature: -54 °C - 204 °C
Flow rate: 160 l/min
... changes. Positive stops prevent springs from going solid. Compact size. Adjustments cannot be backed out of the valve. Industry common cavity. Hardened poppet and cage for long life. Flow: ...
Hydrabase
DN: 10 mm - 100 mm
Pressure: 25 bar - 250 bar
Temperature: 350 °C
forged body (lifetime up to 60 years) – non-cobalt overlay Material stainless steel 08Ch18N10T, carbon steel 12 020.1 Connection butt welding ends Operating self-acting
ARAKO spol. s r.o
DN: 15 mm - 200 mm
Pressure: 10 bar - 40 bar
Temperature: -50 °C - 400 °C
design of the body is straight sealing – check valve disc with spring – with spring, the valve can be mounted in position both horizontal and vertical – sealing surface is welded by ...
ARAKO spol. s r.o
DN: 65 mm - 150 mm
Pressure: 160 bar - 400 bar
Temperature: -10 °C - 550 °C
high-pressure lift check valve – design of the body is straight sealing – check valve disc – sealing surface is welded by hard facing (13Cr) or Stellite 6 – complies ...
ARAKO spol. s r.o
DN: 0.5 in
Pressure: 210 bar
Temperature: -20 °C - 90 °C
Hyva Check Valve with a max. working pressure of 210 bar, Nominal flow of 35 L/min. This Check Valve is made from aluminium and the temperature range is -20 / + 90.
DN: 15 mm - 100 mm
Pressure: 40 bar
Temperature: 400 °C
•Process line, product pipes, way out of pumps, fluid machinery. •The check disc valve close for the spring action when reduce the line pressure, getting a mild closing and avoiding the fluid recession ...
DN: 40 mm - 1,200 mm
Pressure: 40, 64, 10, 16, 25 bar
STANDARDS OF MANUFACTURE EN 1074-1 VALVES FOR WATER SUPPLY EN 1074-3 CHECK VALVES EN 558 S48 (ISO 5752) (DIN 3202 F6) FACE TO FACE EN 1092-1 DRILLING FLANGES STEEL EN 1092-2 DRILLING ...
ACMO S.p.A.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining