NORMA straight fittings
Diameter: 50 mm - 150 mm
PU threaded connector for all Master-PUR L, Master-PUR H and Master-PUR HX hose types, based on DIN ISO 228 Description, addition to product name - PU threaded connector for all Master-PUR L, Master-PUR H and Master-PUR HX hose types, ...
Masterflex SE
Diameter: 50 mm - 150 mm
... threaded connector for attaching fittings to Master-PUR Food hoses, approved for direct food contact EU 10/2011, following DIN ISO 228 Description, addition to product name - cast-on PU threaded connector for attaching ...
Masterflex SE
Diameter: 32 mm - 300 mm
screw-on PU end fitting for Master-PUR hoses on spigots acc. to DIN 2448/DIN 2458, permanently antistatic Description, addition to product name - screw-on PU end fitting for Master-PUR hoses on spigots ...
Masterflex SE
Diameter: 3 mm - 54 mm
Polyamide fitting Colour -black, grey Material - Polyamide Protection class - IP 55 Temperature range - -30°C to +80°C Variant - PG, Metric Polyamide fitting clip Colour - black Material - Polyamide Temperature ...
Operating pressure: 0 bar - 10 bar
Material - Nickel-plated brass Max. operating temperature heating - 120 °C
Cap nut - : - Brass with nickel plated Ring - : - PA6 Ferrule - : - Aluminium / brass Gland body - : - Brass with nickel plated O-ring - : - NBR Connection thread - : - Metric (EN60423) / PG (DIN 40430) Properties - : - Easy to ...
ORTAC
Cap nut - : - Brass with nickel plated Ring - : - PA6 Ferrule - : - Aluminium / brass Gland body - : - Brass with nickel plated O-ring - : - NBR Connection thread - : - NPT ANSI B1.20.1 Properties - : - Easy to assemble : - Fixed ...
ORTAC
Flexible Spiral Conduit Fittings Liquid Tight Female Type Fixed & Swivel Cap nut: - Brass with nickel plated Ring: - PA6 Ferrule: - Aluminium / brass Gland body: - Brass with nickel plated O-ring: - NBR Connection ...
ORTAC
These tools manufactured by Omega Air, are pneumatic quick couplings that features a scratch resistant material composition. Their flow capacity guarantees users a high compressed air supply for its pneumatic components. Moreover, these ...
Diameter: 12 mm - 500 mm
Operating pressure: 16 bar
Series of fittings designed for conveying fluids under pressure with a cold chemical weld jointing system (solvent welding) using a suitable solvent cement and cleaner-primer. PVC-U MAIN PROPERTIES AND CHARACTERISTICS: - ...
FIP - Formatura Iniezione Polimeri
Diameter: 16 mm - 125 mm
Operating pressure: 16 bar
PVC-U Series of fittings designed for conveying fluids under pressure with a cold chemical weld jointing system (solvent welding) using a suitable solvent cement and cleaner-primer. PVC-C Series of fittings ...
FIP - Formatura Iniezione Polimeri
Diameter: 0.38 in - 4 in
Operating pressure: 16 bar
Series of fittings for pipes conveying fluids under pressure with threaded joints. PVC-U MAIN PROPERTIES AND CHARACTERISTICS: - Good chemical resistance: U-PVC resins guarantee excellent chemical resistance with ...
FIP - Formatura Iniezione Polimeri
Diameter: 13 mm - 76 mm
Operating pressure: 4.9 bar - 16.1 bar
... 650V Plastic). Traceability Silicone label QR Marking Special marking Assemblies 316L Stainless steel SZR crimp fittings Molded clamps Features Outer Layer VMQ Silicone, smooth and translucent. Reinforcement Polyester ...
Diameter: 19 mm
Operating pressure: 5,075 psi
Manuli Hydraulics has long been established as one of the global leaders in the design and manufacture of premium quality quick couplings. The Q.Safe range of quick couplings is widely considered to represent the gold standard in both ...
MANULI HYDRAULICS
These high quality connectors were manufactured by the Colder Products Company, which is one of the leaders in the industry. These products are the right fit even for the most demanding applications, and come with precise hose barbs that ...
CPC - Colder Products Company
Diameter: 6.5 mm - 44 mm
The IVG conduit fittings are made of specially modified polyamide 6, thermoplastic elastomer and nickel-plated brass. The materials are halogen, phosphor and cadmium-free.The IVG conduit fittings feature ...
Diameter: 2 mm - 35 mm
Operating pressure: 250 bar
- easy and fast to install - compact size - extensive range - many combination possibilities M = connection nut with metric thread (M and G are not interchangeable) Material Brass CW 617N (CuZn40Pb2), surface ist pickled Nominal pressure ...
SERTO
Diameter: 6 mm - 18 mm
Operating pressure: 400 bar
Characteristics, specialities • high pressure resistance • easy, robust assembly due to tightening limitation • corrosion resistant • compact design • very good resistance to vibration Material Stainless steel 1.4571 (≈ 316 Ti), alloy ...
SERTO
Diameter: 4 mm - 15 mm
Operating pressure: 125 bar
easy and fast to install - compact size - extensive range - many combination possibilities G = connection nut with British Standard Pipe (BSP) threads (M and G are not interchangeable) Material Brass CW 617N (CuZn40Pb2) , surface is ...
SERTO
Diameter: 5.5, 5.3, 7.5 mm
Operating pressure: 16, 12 bar
The high flow enhances your tool performance for increased productivity. The secret behind this innovative and patented safety coupling is the highest flow on the market combined with a low pressure drop. During disconnection eSafe ...
CEJN
Diameter: 4 mm - 16 mm
Operating pressure: 1 bar - 11 bar
... coupling even in the presence of pipes with diagonal cuts Made with virgin material Push-in fittings are so defined as they allow to connect the tube to the fitting in a “instantaneous” way without ...
Airwork Pneumatic Equipment
Diameter: 4 mm - 16 mm
Operating pressure: 1 bar - 16 bar
Push-in fittings are so defined as they allow to connect the tube to the fitting in a “instantaneous” way without using tools. The tightness of the tube takes place through an elastic clamp which holds ...
Airwork Pneumatic Equipment
Diameter: 4 mm - 15 mm
Operating pressure: 1 bar - 20 bar
Touch fittings are mainly used during “plastic” tubes assembly for pneumatic installation especially in case of vibrations or extreme climatic conditions (that involve changes on tube features by passing time). The fitting ...
Airwork Pneumatic Equipment
Diameter: 0.13 in - 4 in
Operating pressure: 10 bar
GF-140C Conical seal with parallel BSP thread to DIN EN 10226
Schwer Fittings
Diameter: 4 mm - 38 mm
Operating pressure: 100 bar - 400 bar
Schwer Fittings
Diameter: 6 mm - 38 mm
Operating pressure: 315, 400 bar
Straight Bulkhead Coupling SR-526M with parallel metric thread to DIN 13
Schwer Fittings
Diameter: 4 mm - 12 mm
Operating pressure: 0 bar - 15 bar
HA Technopolymer Push-In Fittings CHARACTERISTICS Temperature-20 80 °C (based on the type of tube) Fluidcompressed air, vacuum Max pressure15 bar Working pressure-0,99 -5-10 bar Bodytechnopolymer Fixing elementsnickel-plated ...
Diameter: 6.3 mm - 50 mm
Operating pressure: 15,000,000 Pa - 35,000,000 Pa
Features Connection by pulling back the sleeve Disconnection by pulling back the female sleeve Shut off by poppet valve Connection under pressure not allowed Disconnection under pressure not allowed Interchangeability according to ISO 7241-1 ...
FASTER S.p.A.
Diameter: 0.5 in
Operating pressure: 16 bar
TECHNICAL DATA Material Body and thrust ring: nickel plated brass Thread Metric, taper and parallel Seal NBR rubber Clamp Stainless steel AISI 316 Size M5 ÷ G 1/2 Fluid Air, water, oil, steam Working temperature - 20 ÷ +70 ...
Waircom
Dry Disconnect Couplings are used within wet hose systems to connect and disconnect hose and pipe quickly and without spillage, under pressure. This is recommended for aggressive and environmentally dangerous media. DDC serve for loading ...
• Quick fitting for outstanding operability and durability that provides a more compact configuration while maintaining fitting function. A lineup of smart types.
Koganei has developed these high-quality, high-performance fittings using various technologies and know-how gained over the years through our manufacturing of pneumatic systems equipment. ■Features *ln chemical resistance... The ...
Operating pressure: 25, 80, 200, 250, 390 bar
... are available in 1/2”, 3/4” and 1” and many thread types, so they can connect any combination of threads and pipes . The fittings are suitable for low and high pressure work. Compatible with plastic garden connector.
NITO Fitting - NITO stainless steel fluid quick couplings are suitable for food contact and are used in the pharmaceutical, food, cosmetic and chemical industries. Stainless steel fittings are available ...
NITO high pressure quick coupling Optimal solution for high pressure cleaners and fixed installations. NITO high pressure fittings are manufactured from materials with an exceptionally strong and secure locking mechanism ...
A fluid connector is a connector that transmits fluids. It is a connector for connecting or disconnecting the fluid pipeline, which is suitable for various fluid connection occasions. such as Automotive, Plastics, IT-Broadcasting, Railway, ...
Diameter: 4 mm - 16 mm
Operating pressure: -0.1 MPa - 1 MPa
... . Various sizes of unequal union type makes it possible to handle with just one fitting, although two or more fittings are used before. It reduces the amount of fitting used and enables ...
NIHON PISCO CO., Ltd.
Diameter: 3, 10, 2, 1.8, 6 mm
Operating pressure: -0.1 MPa - 1 MPa
Mini-type fitting is 40% smaller than the standard type fitting. Even the ultra-small size, tube can be easily connected or disconnected. The elliptical, ultra-small release ring is employed. Easy ...
NIHON PISCO CO., Ltd.
Diameter: 3 mm - 6 mm
Operating pressure: -0.1 MPa - 0.5 MPa
Barb joint best suitable for space-saving piping. They are optimal for piping vacuum equipment. (Use with vacuum tube.) As for compression type, tube can be tightening by hands. Clean-room Package, best suitable for compact piping ...
NIHON PISCO CO., Ltd.
Diameter: 2, 2.5, 3, 4 in
Operating pressure: 40 bar
Swivel joint – direct-flangeswivel Product characteristics steel (42CrMo4) or stainless steel (1.4571) PTFE-Compound-seal built-in ball guiding tracks similar to ball bearings swiveling, rotating movements with ...
HAAG + ZEISSLER Maschinenelemente GmbH
Diameter: 2 in - 32 in
Operating pressure: 40 bar
Swivel joint – direct-flangeswivel, Product characteristics steel (42CrMo4) or stainless steel (1.4571) PTFE-Compound-seal built-in ball guiding tracks similar to ball bearings swiveling, rotating movements with ...
HAAG + ZEISSLER Maschinenelemente GmbH
Diameter: 0.25 in - 2 in
Operating pressure: 350, 100 psi
Swivel joint – heavy version with thread connections, nominal diameters G1/4″ – G2″ Product characteristics steel (42CrMo4) or stainless steel (1.4571) PTFE-Compound-seal built-in ball guiding tracks similar to ball ...
HAAG + ZEISSLER Maschinenelemente GmbH
Our EQOair range is the solution for your compressed air networks. All components, pipes and fittings, are 100% aluminum, enabling you to supply your workshops with optimized performance and energy savings. Lightweight ...
EQOfluids FR
Diameter: 20 mm - 160 mm
Operating pressure: 16 bar
EQOfluids FR
Diameter: 20 mm - 90 mm
Operating pressure: 16 bar
EQOfluids FR
Operating pressure: 0 bar - 8 bar
It’s a Safety accessory in according with Directives ATEX 2014/34/EU and PED 2014/68/UE. The dry Break coupling is used to prevent any possible leaking during the process of transferring hazardous fluids in different fields of application ...
Ridart srl
Diameter: 3, 4 in
Operating pressure: 8 bar - 230 bar
VAPOR RECOVERY ADAPTOR WITH IN LINE DEFLAGRATION FLAME ARRESTER It's a Protection System with ribbon coil: deflagration in-line flame arrester in according with Directive 20H/34/EU and harmonized standard EN ISO 16852:2016 - Used for ...
Ridart srl
Diameter: 2, 3 in
Operating pressure: 0 bar - 8 bar
It's a Safety accessory in according with Directives ATEX 2014/34/EU and PED 2014/68/UE. The dry quick coupling is used to prevent any possible leaking during the process of transferring hazardous fluids in différent fields of application ...
Ridart srl
Diameter: 4 mm - 12 mm
Operating pressure: 0 bar - 10 bar
Diameter: 4 mm - 10 mm
Operating pressure: 80 bar
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining