Diameter: 0.38 in - 2.5 in
Operating pressure: 100 bar - 315 bar
OMT Group Spa produces a complete range of couplings for gear pump. The range of couplings for gear pump in aluminium for low pressures (max working pressure 180 Bar) consists in: RA series with two fixing holes RP series with ...
Diameter: 0.25 in
Quick coupler, female, including aluminium dust cap • Connection: ¼" BSP female • Fits: A 239
Holmatro Industrial equipment
Diameter: 0.25 in - 1 in
Operating pressure: 17.23 bar
1/2, 3/4, and 1 in. (15, 20, and 25mm) Description: Series 3008 Dielectric Unions are used in commercial and residential applications to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. ...
Watts Water Technologies
Diameter: 0.25 in - 2 in
Operating pressure: 20 bar
... C • - Max Température Ts :+ 180°C • - Max Pressure Ps : 20 bars RANGE : • - From DN 1/8* to DN 4a • - ASTM A351 CF8M fittings excepted for Ref.2034. 2038. 2039. 2040. 2041 and 2042 in SS ASTM A182 F316
SFERACO
Diameter: 4 mm - 16 mm
Operating pressure: 10 bar
for aggressive air, gases and liquids in an aggressive environment, e.g. in laboratories, process engineering, biotechnology, medical and laboratory technology Characteristics, speciality • easy and fast to install • extensive product ...
SERTO
Diameter: 2 mm - 35 mm
Operating pressure: 250 bar
- easy and fast to install - compact size - extensive range - many combination possibilities M = connection nut with metric thread (M and G are not interchangeable) Material Brass CW 617N (CuZn40Pb2), surface ist pickled Nominal pressure ...
SERTO
Diameter: 4 mm - 15 mm
Operating pressure: 125 bar
easy and fast to install - compact size - extensive range - many combination possibilities G = connection nut with British Standard Pipe (BSP) threads (M and G are not interchangeable) Material Brass CW 617N (CuZn40Pb2) , surface is ...
SERTO
Diameter: 4 mm - 12 mm
Operating pressure: 0 bar - 15 bar
HA Technopolymer Push-In Fittings CHARACTERISTICS Temperature-20 80 °C (based on the type of tube) Fluidcompressed air, vacuum Max pressure15 bar Working pressure-0,99 -5-10 bar Bodytechnopolymer Fixing elementsnickel-plated ...
UNIVER Group
Safe and reliable surface installations can be set up with the cable conduit accessories shown on this page, using the conduits themselves, couplings for distribution assemblies and boxes, and wall fastening accessories. These rigid conduits, ...
SCAME PARRE S.p.A.
CROSS PIECES Cylindrical thread 4 x inside thread
AIRPRESS
Diameter: 0.5 in
Operating pressure: 16 bar
TECHNICAL DATA Material Body and thrust ring: nickel plated brass Thread Metric, taper and parallel Seal NBR rubber Clamp Stainless steel AISI 316 Size M5 ÷ G 1/2 Fluid Air, water, oil, steam Working temperature - 20 ÷ +70 ...
Waircom
Diameter: 27 mm - 562 mm
Operating pressure: 10 bar
elbows - short radius - Ext. from DIN 86090 in copper nickel - 45° - 10 bar - STANDARD : Extrapolated from DIN 86090
Diameter: 0.25 in - 4 in
Langley Alloys are able to provide a wide range of olet fittings. Olets come in many different specific forms, allowing end users to create branching fittings along the main run of piping. They are sized ...
Diameter: 0.25 in - 4 in
The sourcing of fittings can be a challenging and time-consuming process given the immense number of different configurations. Fortunately, Langley Alloys is well-placed to source and manufacture fittings ...
Diameter: 0.5 in - 100 in
Brass fitting fire thread from 100 to 3 1/2″ and to 4″
Diameter: 25 mm - 100 mm
Reduction from 45 to 25, from 70 to 45 and 100 to 70. Stamped aluminium
Goodridge 236 fittings are reusable fittings designed for use with our 200 series hose. The triple seal/double O-ring nitrile, cutter design ensures a secure leak free connection, easily assembled ...
GOODRIDGE FLUID TRANSFER SYSTEMS
Carburettor banjo to double hose end fitting for use with 200-06 hose. To suit Dellorto or Weber carburettor applications with 12mm thread. Use with our 2776-06-M12D or 2776-06-M122D banjo bolts + 2x CW901-M16 crush ...
GOODRIDGE FLUID TRANSFER SYSTEMS
Goodridge 236 fittings are reusable fittings designed for use with our 200 series hose. The triple seal/double O-ring nitrile, cutter design ensures a secure leak free connection, easily assembled ...
GOODRIDGE FLUID TRANSFER SYSTEMS
... double ferrule compression fittings bring together analytical performance and the robustness of legacy industrial design with improved leak detection. As a significant advancement over the universal industrial ferrule ...
We’ve been designing high-performance analytical instruments for decades, so we know how important fittings are. From surface finish to leak integrity to dead volumes, all factors are taken into account and must meet ...
Diameter: 6 mm
Air Coupling ⅛" 90° 6 mm Push-In is a wet kit component for tipper body. Every wetkit is completed with hoses and adaptors of various types. Hyva offers a wide range of high quality parts dedicated to various truck related applications. ...
Diameter: 0.13 in - 0.5 in
... steel compression fittings with parallel or tapered thread. They are suitable for imperial and metric probe diameters starting from 1mm. The tapered fittings are constructed with British Standard Pipe ...
Diameter: 0.13, 0.25 in
These compression fittings are for use with numerous applications. There are brass compression fittings with a parallel thread and brass compression fittings with a tapered thread. Numerous ...
When fitted, a bayonet fitting spring loads the sensor to keep it in permanent contact with the measured surface. Bayonet fittings are particularly suitable for mounting sensors in plastic extruders, ...
Operating pressure: 350, 700 bar
Connect 2 Quick-test XT 10,000 psi hoses together quickly and easily • Quick-test XT connection makes connecting two high pressure hoses together quick and easy • Note that these are not compatible with QT or QS hoses. Please ...
Ralston
Operating pressure: 350 bar
... other side • Bulkhead seals so no liquid or moisture can get into a control panel or enclosure • Use to connect fittings on the inside of an enclosure to a Quick-test hose on the outside of the enclosure ...
Ralston
Operating pressure: 350 bar
Connect three hoses or a combination of 3 hoses, adapters and hand pumps or manifolds • Durable forged construction • Tee has full flow through each of the ports • Made in USA
Ralston
Diameter: 4 mm - 25 mm
... production of fittings. They are manufactured in three types of materials: 316 grade stainless steel, carbon steel and brass. In installations with plastic tubing, the rings will be made of nylon for brass fittings ...
Forged 90° Socket weld Fittings, Forged Socket weld Equal Tee, Cross Stainless Steel Forged Fittings, Forged Elbow, Threaded Fittings, Socket weld Pipe Fittings, Forged ...
... Buttweld Pipe Fittings Suppliers in Germany, Iraq, Malaysia, Canada, Saudi Arabia Manufacturers of Stainless Steel Buttweld Pipe Fittings in India, Suppliers of Stainless Steel Buttweld Pipe Fittings ...
... Stainless Steel Tube Fittings, Compression Tube Fittings, Instrumentation Tube Fittings,Stainless Steel Tube Fittings, Double Ferrule Tube Fittings, ...
Diameter: 1.25 in
The plug and socket fitting portion of couplings 20, 30 and 40 are interchangeable, as are those of the 400, 600 and 800 couplings. This means that a coupling 20 may be connected to a 30 or 40, the only difference being ...
Wilhelmsen
Diameter: 1 in
The plug and socket fitting portion of couplings 20, 30 and 40 are interchangeable, as are those of the 400, 600 and 800 couplings. This means that a coupling 20 may be connected to a 30 or 40, the only difference being ...
Wilhelmsen
Diameter: 0.25 in
The plug and socket fitting portion of couplings 20, 30 and 40 are interchangeable, as are those of the 400, 600 and 800 couplings. This means that a coupling 20 may be connected to a 30 or 40, the only difference being ...
Wilhelmsen
Diameter: 0.5 in - 1 in
Operating pressure: 150 psi
SIZE: 1/2＂～1＂ JOINT END TYPE 1: SOCKET (ANSI /DIN / JIS/ CNS) JOINT END TYPE 2: THREADED (PT) WORKING PRESSURE: 150PSI Key words: External teeth live joint
Xiamen Keheng Plastic Co., Ltd.
Diameter: 0.5 in
Operating pressure: 150 psi
SIZE: 1/2＂ JOINT END TYPE 1: SOCKET (ANSI /DIN / JIS/ CNS) JOINT END TYPE 2: THREADED (G/PT/NPT) WORKING PRESSURE: 150PSI
Xiamen Keheng Plastic Co., Ltd.
Diameter: 0.5 in - 1 in
Operating pressure: 150 psi
SIZE: 1/2"~1" CONFORM TO: ASTM D2467 (SCH80) ASTM F439 STANDARD: ANSI WORKING PRESSURE: 150PSI
Xiamen Keheng Plastic Co., Ltd.
Diameter: 21.3 mm - 88.9 mm
Operating pressure: 4 bar - 16 bar
Model: - Compression pipe coupling - Material body: - malleable iron galvanised Connection: - Conical clamping ring - Material seal: - NBR Temperature: - +80 °C - Bending angle: - 3 degrees Pressure: - 16 bars (water) - Use: - New ...
Diameter: 40 mm - 225 mm
Operating pressure: 10 bar
... increased through directly available reducers at the branch, which also makes the fitting compact and light. Branches at other angles are available upon request. The fittings to be offered must be ...
Reinert-Ritz GmbH
Diameter: 250 mm - 630 mm
... increased through directly available reducers at the branch, which also makes the fitting compact and light. Branches at other angles are available upon request. The fittings to be offered must be ...
Reinert-Ritz GmbH
Diameter: 40 mm - 225 mm
... assurance system in accordance with DIN EN ISO 9001. For all fittings a certificate in accordance with DIN EN 10204 must be submitted by the manufacturer. Depending on the dimension, the fitting must ...
Reinert-Ritz GmbH
Diameter: 18 mm - 114.3 mm
... alloy fittings for butt welding parts such as elbows, backhaul, covers, tees, reducing pipes, lap joints, and other types. We are a reliable distributor, manufacturer, stockist, supplier, and trader of Titanium tees. The ...
Diameter: 50 mm
... , apartment blocks and hotels. The system comprises multilayer composite pipe and high quality polyphenyl sulphone (PPSU) fittings with a fixed stainless steel sleeve, in sizes 16mm, 20mm, 25mm, 32mm, 40mm, 50mm, 63mm and 75mm.
Wavin
Please specify:
Help us improve:
remaining