{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Gap fill: 0.12 mm
Viscosity: 8, 1.7 Pa.s
... corrosion protection WRAS listed for contact with wholesome (potable) water Description Permabond® A1042 is a rapid curing adhesive designed to lock and seal metal parts that subsequently may need to be dismantled for maintenance. ...
Permabond
Gap fill: 0.25 mm
... Rapid cure Ideal when bonding dissimilar materials Improved fatigue life Description Permabond® A1046 is a rapid curing adhesive designed to provide permanent locking and sealing of metal parts such as bearings, gears, pulleys and ...
Permabond
Gap fill: 0.5 mm
... ). 2) For taper/parallel threads ensure adhesive is positioned where the threads will engage fully. Gaps and cure times may be greater than expected with this joint configuration. 3) Ensure sufficient adhesive is applied ...
Permabond
Gap fill: 0.5 mm
... required. It has excellent chemical and high temperature resistance or up to 200°C Surface Preparation Though the anaerobic adhesives will tolerate a slight degree of surface contamination, best results are obtained on clean, dry ...
Permabond
Gap fill: 0.1 mm
... low-viscosity, high-purity cyanoacrylate adhesive. It is ideal for use on hard-to-bond plastics and rubbers such as natural rubber, EPDM and butyl rubber. Cyanoacrylate adhesives are single component adhesives ...
Permabond
Gap fill: 0.5 mm
... for Use 1) Shake bottle before use. 2) Apply the adhesive sparingly to one surface. 3) Bring the components together quickly and correctly aligned. 4) Apply sufficient pressure to ensure the adhesive spreads into ...
Permabond
Gap fill: 0.15 mm
... frosting and fogging. Cyanoacrylate adhesives are single component adhesives that polymerize rapidly when pressed into a thin film between parts. The moisture adsorbed on the surface initiates the curing of the adhesive. ...
Permabond
Gap fill: 0.25 mm
... bondlines, common with other cyanoacrylate adhesives on hot and humid days, is eliminated. The elimination of fogging improves the production rate of acceptable parts as well as their appearance. The adhesive is very ...
Permabond
Gap fill: 0.5 mm
... ceramics and wood. Cyanoacrylate adhesives are single component adhesives that polymerize rapidly when pressed into a thin film between parts. The moisture adsorbed on the surface initiates the curing of the adhesive. ...
Permabond
Working temperature: 120 °C
... oxide layer. Directions for Use 1) The adhesive should be dispensed from the cartridge via the nozzle supplied (this can be cut to give the appropriate sized bead to cover the bond area). 2) Apply the adhesive to ...
Permabond