PNR nozzles
Orifice diameter: 1 in
Flow: 25 l/min - 250 l/min
Pressure: 6 bar
... that any debris is flushed from the nozzle to avoid pattern disruptions or flow reductions. All the models include a pressure eliminator for ease of flow settings at different pressures. Stream Pattern: The nozzle ...
Tipsa
Orifice diameter: 0.5 in
Flow: 25 l/min - 950 l/min
Pressure: 6 bar
... conditions. The FLUSH mode is used to ensure that any debris is flus- hed from the nozzle to avoid pattern disrup- tions or flow reductions. Stream Pattern: The nozzle stream is adjusted by rotating ...
Tipsa
Orifice diameter: 2, 1, 1.5, 2.5 in
Flow: 19 l/min - 1,000 l/min
Pressure: 6 bar
... for a quality fog pattern. Foam: The VIPER® SG nozzle can be used as an aspirating foam nozzle with the addition of inline eductors and foam tubes. Inlet Options: The VIPER® SG selectable flow nozzles ...
Tipsa
Orifice diameter: 0.8, 1.2, 1.5, 1.8 mm
Flow: 95 l/min - 375 l/min
Pressure: 4, 6, 8 bar
... or 70 mm. It is ideal for robotised cleaning operations in production, where a single-axis movement of the nozzle is sufficient. The nozzle can be coupled to an ionisation system to remove electrostatic charges.
Ionizing nozzles are employed where installation conditions are critical, especially in confined spaces. These nozzles has a pvc core, where all its electronic components are impregnated in epoxy resin ...
Elettromeccanica Bonato sas
... ionizing nozzles have a double function, cleaning the surface of interest and eliminate existing electrostatic charges. Ionizing nozzles are employed where installation conditions are critical, especially ...
Elettromeccanica Bonato sas
... ionizing nozzles have a double function, cleaning the surface of interest and eliminate existing electrostatic charges. Ionizing nozzles are employed where installation conditions are critical, especially ...
Elettromeccanica Bonato sas
Flow: 70, 110, 190 l/min
Pressure: 2, 3, 1 bar
Media temperature: 0 °C - 50 °C
Rotary Nozzle with AC Static Eliminator for Dust Removal and Ionisation • Wide area covarage by rotating the nozzle with high speed • Tungsten pins for extreme high lifetime • Cleaning areas by using ...
FÖGE Elektronik GmbH
Flow: 100 l/min - 110 l/min
Pressure: 4 bar
Media temperature: 0 °C - 50 °C
Rotary Nozzle with AC Static Eliminator for Dust Removal and Ionisation • Wide area covarage by rotating the nozzle with high speed • Tungsten pins for extreme high lifetime • Cleaning areas by using ...
FÖGE Elektronik GmbH
Flow: 215, 290, 375 l/min
Pressure: 4, 6, 8 bar
Media temperature: 0 °C - 50 °C
Rotary Nozzle with AC Static Eliminator for Dust Removal and Ionisation • Wide area covarage by rotating the nozzle with high speed • Tungsten pins for extreme high lifetime • Cleaning areas by using ...
FÖGE Elektronik GmbH
Spray nozzles Eductor nozzle Misting nozzles Washing - cleaning nozzles
The liquid is sprayed when coming into contact with the vibrating surface. The ultrasonic nozzle produces droplets or particles of mastered size: the higher the ultrasonic frequency, the smaller the aerosol particles ...
The ultrasounic technology produces an acoustic wind phenomenon in front of the probe without gas displacement: the focusing of the acoustic waves produced by the probe creates a pressure field at a few centimeters distance. This pressure ...
Orifice diameter: 0.2 mm - 1.6 mm
Low Flow Rate Fine Fog Nozzles/ Flat Spray BIMV series Features • Flat spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 100 μm or less (*3). • Features large turn-down ...
H. IKEUCHI & CO., LTD.
Lance Nozzle, good for complete evaporation in cooling tower, large volume is also effective for dust suppression. Features • Pneumatic spray nozzle producing fine atomization with a mean droplet ...
H. IKEUCHI & CO., LTD.
Orifice diameter: 0.2 mm - 5.8 mm
Standard Flat Spray Nozzles - One-piece Structure with Ceramic Tip Even Spray Distribution Features • Flat spray pattern with uniform distribution throughout pattern area. • Even spray impact across ...
H. IKEUCHI & CO., LTD.
Concentric tube nozzles for air/oil lubricated systems, mainly for MQL etc.
SOATO FLUID SYSTEM (SHANGHAI)CO.,LTD
WS single nozzle can accurately spray to the lubrication point position to achieve precise lubrication.
SOATO FLUID SYSTEM (SHANGHAI)CO.,LTD
WD dual nozzles, the center distance of the dual nozzles is 7, 9, 11mm, whichWD dual nozzles, the center distance of the dual nozzles is 7, 9, 11mm, which can be accurately ...
SOATO FLUID SYSTEM (SHANGHAI)CO.,LTD
Orifice diameter: 0.5 mm - 3.5 mm
Flow: 50 l/min - 5,000 l/min
Pressure: 40 bar - 350 bar
... loss through the nozzle. - Smaller and lighter compact design which is more durable, easy to clean and can be rapidly stripped down and reassembled. - No wrenches or tools are required to install the nozzle. - ...
DELAVAN France
... required. Large flow passages greatly reduce clogging. CONSTRUCTION AND MATERIALS Three part construction: Nozzle body - Brass or 303 Stainless Steel. Thread sizes:3/4"-20 UNEF on No. 30615 and 11/8"-18 ...
DELAVAN France
... atomising series spray nozzles offer the user a wide variety of spray patterns, flow rates and atomisation. Unlike hydraulic or pressurized nozzles where the energy from the pressure of the liquid is ...
DELAVAN France
Screwed single nozzles IHR nozzles differ in 4 categories: . Single standards . Individual Eco-Line . Individual mini- molds . Multi-tip Thanks to the different solutions, iHR Solution is ...
iHR srl
The screwed single nozzles IHR nozzles differ in 4 categories: . Single standards . Individual Eco-Line . Individual mini- molds . Multi-tip Thanks to the different solutions, iHR Solution ...
iHR srl
The screwed single nozzles IHR nozzles differ in 4 categories: . Single standards . Individual Eco-Line . Individual mini- molds . Multi-tip Thanks to the different solutions, iHR Solution ...
iHR srl
Orifice diameter: 4, 8, 15 mm
... internationally patented Variacor® system enables you to assemble spraying systems quickly and easily as well as adjusting nozzle positions efficiently. Economy: You don't waste time calling a piping specialist or ...
INDUSTRIAL SPRAY NOZZLES - FLAT SPRAY SPRAY CHARACTERISTICS Produces a uniform, flat spray pattern without hard edges at pressure of 0.5 bar and up. Tapered edges of pattern allow overlapping for even distribution. Impact ...
DELAVAN SPRAY TECHNOLOGIES
... or valve required. Large flow passages greatly reduce clogging. CONSTRUCTION AND MATERIALS Three part construction: Nozzle body - Brass or 303 Stainless Steel. Thread sizes:3/4”-20 UNEF on No. 30615 and 11/8”-18 ...
DELAVAN SPRAY TECHNOLOGIES
DELAVAN SPRAY TECHNOLOGIES
Rotating cleaning nozzles, „CanCleaner“ and „MiniWhirly“, ball bearing-mounted Rotating cleaning head with flat spray nozzles and ball bearings.
Lechler
Orifice diameter: 0.4, 0.5 mm
Particularly fine flat fan atomization with air or gas. Pressure principle. Internal mixing of fluids. Applications: Web dampening, cooling, humidification of goods.
Lechler
Full cone nozzles with female thread , series 486 Not aligned Thread: 1/8, 1/4, 1/2, 3/8 BSPP Spray angle: 45°, 50°, 65°, 80°, 90° Volume rate at 2 bar: 2.10 l/min to 14.00 l/min (depends on spray angle) Foot print: circular
Lechler
Orifice diameter: 4.8 mm
Media temperature: 0 °C - 45 °C
Hot runner nozzle Open single nozzle with thick-film heating element (BlueFlow®) Operating voltage 230 VAC Volt Alternating Current - Wechselstrom Heating element tubular Nozzle ...
GÜNTHER Heisskanaltechnik
Orifice diameter: 0.4, 0.6, 0.8, 1 mm
Cold runner nozzle for direct injection Melt channel diameter 4.8 mm One cooling circuit supplies up to four nozzles. The following parts are included in the scope of delivery: - Plug-in cooling ...
GÜNTHER Heisskanaltechnik
Orifice diameter: 7.5 mm
... Current - Wechselstrom Heating element conventional Nozzle type SET – open with tip DET – open with straight outlet Available nozzle lengths (mm) 50 / 60 / 80 / 100 / 120 Nozzle ...
GÜNTHER Heisskanaltechnik
... effectively the blowing of toilets. Technical Specifications: Optimized Hydro Mechanics Replaceable, threaded stainless steel nozzle inserts Water jet angle 36° ¾" – 1 ¼" hose connection (with bushings available in Accessories)
INTERSEWER UG (haftungsbeschränkt)
... of wear-resistant tempered steel with one forward jet and blind plug (interchangeable) included, the General is a perfect nozzle for preventative maintenance and all-around sewer cleaning. Two different water jet angles ...
INTERSEWER UG (haftungsbeschränkt)
The Black Blaster is an exceptional nozzle and a great alternative to a stainless steel nozzle. This nozzle offers high cleaning efficiency. Advantages: Relatively inexpensive Can be ...
INTERSEWER UG (haftungsbeschränkt)
LSD Thread The A_LSD rotating heads are built in AISI 316 stainless steel, and are mounted on double ball bearing, to have a correct rotation in any mounting position. The rotating part has the peculiarity of not having coupling lines ...
EUSPRAY BY EUROSPRAY SPRAY AND FILTER TECHNOLOGY
LSD clip/weld The LSD rotating heads are built in AISI 316 L stainless steel, and are mounted on double ball bearing, to have a correct rotation in any mounting position. The rotating part has the peculiarity of not having coupling ...
EUSPRAY BY EUROSPRAY SPRAY AND FILTER TECHNOLOGY
Building: The A_LSE48 rotating heads are built in AISI 316 stainless steel, and are mounted on double ball bearing, to have a correct rotation in any mounting position. Their reduced diameter allows the use, in the case where there are ...
EUSPRAY BY EUROSPRAY SPRAY AND FILTER TECHNOLOGY
Orifice diameter: 4 mm
Multi-directional nozzles Dual direction Multi-directional double balls Extended ball socket, dual direction adjustment For CNC lathes and centres with high-pressure pumps
Orifice diameter: 15 mm
Product Description welding nozzle A10.5 for 15mm sheets
HSK Kunststoff Schweißtechnik GmbH
Product Description welding nozzle A3.5 for 5mm sheets
HSK Kunststoff Schweißtechnik GmbH
Product Description welding nozzle A5.6 for 8mm sheets
HSK Kunststoff Schweißtechnik GmbH
Orifice diameter: 4 mm - 8 mm
Thread Mount Type The Coolant Spray Nozzle could easily adjust its direction and spray precisely. BA90102020001A Thread Mount: PT 1/8 L: 20 L1: 10 D1: 6 D2: 5 d: 4 H: 17 BA90102020002A Thread Mount: PT ...
Orifice diameter: 3 mm - 4.4 mm
The Coolant Spray Nozzle could easily adjust its direction and spray precisely. When the coolants correspond with three pressures-low, medium and high pressures, it can precisely aim at workpiece. They are suitable for ...
Leak Lock Type (Alloy Steel) Special design for avoiding oil leaking. Not delaying spraying fluid which prolongs the longevity of the tool holders. SPECIFICATIONS BA90104020001A Thread Mount: PT 1/8 L: 40 L1: 10 L2: 18 D1: 6 D2: ...
Available as threaded or non-threaded and come in many different shapes and sizes for...
Orifice diameter: 0.25 in - 0.38 in
Flow: 2.3 m³/h - 5.7 m³/h
Pressure: 1, 0.2 bar
The DD 106 discharge nozzles in the neXt® product family are designed to fit existing ball heads of 1/4" Ariana articulated hoses. This means that you may, for instance, extend your existing articulated hose system ...
KERSTEN Elektrostatik
Orifice diameter: 0.25 in
Flow: 2.3 m³/h - 5.7 m³/h
Pressure: 0.5 bar - 2.5 bar
The DD 206 and DD 206 (A) discharging nozzles are flow-optimised. A greater electrostatic discharge reach and cleaning effect on the material to be discharged may be achieved with the additional support of compressed ...
KERSTEN Elektrostatik
Flow: 3.7 m³/h - 9.45 m³/h
Pressure: 0.2 bar - 2.5 bar
Media temperature: 5 °C - 80 °C
Discharging Nozzles, Antistatic, The DD 306 and DD 306 A discharging nozzles in the neXt® product family are flow-optimised. Due to their short design, they are, among others, used in areas requiring ...
KERSTEN Elektrostatik
As an alternative to BL industrial atomisers with pump and control unit, Mantis also offers hand-held spraying units, which are ideal for flexible use on smaller surfaces and are extremely portable. Since 2014, it has been possible ...
Mantis ULV
As an alternative to BL industrial atomisers with pump and control unit, Mantis also offers hand-held spraying units, which are ideal for flexible use on smaller surfaces and are extremely portable. Since 2014, it has been possible ...
Mantis ULV
As an alternative to BL industrial atomisers with pump and control unit, Mantis also offers hand-held spraying units, which are ideal for flexible use on smaller surfaces and are extremely portable. Since 2014, it has been possible ...
Mantis ULV
Nozzle nr 3 Material thickness 10-25 mm Gas consumption OX: 2150nl/h, AC: 520nl/h
Media temperature: 450, 350, 320 °C
Heating nozzles for injection machines and molds, hot melt application, similar spray gun, especially in cases where they are available for mounting in limited areas DESCRIPTION: • Power dissipation: up to 5.5 W / ...
Media temperature: 350, 450 °C
Electrical resistance brass injection nozzle, injection nozzles. Nozzle band heater brass tube Diameter = 30mm Height = 22mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm Cable ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining