DN: 15 mm - 100 mm
Pressure: 0 bar - 16 bar
Temperature: 0 °C - 120 °C
BRASS SWING CHECK VALVE - MIHA BRAND, WITH BRASS SEAT Specification Used for water, gasoline, oil Threads standard: BS 21/ ISO 228-1-2000 Max. working pressure: 16 bar Max. working temperature: 120oC Origin: ...
Minh Hoa Investment JSC
DN: 10 mm - 80 mm
Pressure: 40 bar
Temperature: -30 °C - 200 °C
Robust spring-loaded check valve type 4000 from Schubert & Salzer in seat cone design made of stainless steel with high flow rate for aggressive media and high operating temperatures. Size: ...
DN: 6 mm - 10 mm
Pressure: 1.5, 12.5 bar
Use : welding and cutting Fluid : oxygen, acetylene Quick coupling : function
DN: 0.125 in - 0.5 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 130 °C
Ease of use : Easy to install Construction : Brass and nickel-plated brass Safety : for ringmains Construction Brass body Highlight Network safety
DN: 15 mm - 80 mm
Pressure: 100 mbar - 5,000 mbar
Non-return gas valve to prevent gas creepage or surge, for gas, air and oxygen. Features & Benefits: GRS: not flame-arresting GRSF: with sinter bronze flame arrester, so flame-arresting in the case of use ...
... release of the manipulated object is required • Prevents suction through the blow-off lines • Reduced feed pressure for full valve opening
DN: 16 mm - 63 mm
Pressure: 420 bar
... Cartridges Valves Series CSE are passive slip-in cartridge valves similar to our CEE series, but here we have cartridge valve and cover in one valve unit. They are equipped ...
DN: 0.25 in - 1.25 in
Pressure: 0 psi - 5,000 psi
Temperature: -40 °F - 250 °F
Parker check valves are unidirectional flow control devices used primarily in hydraulic systems to eliminate potential damage caused by fluid back pressure. DT Series Check Valves ...
Parker Quick Coupling Division
DN: 0.5 in
Pressure: 0 bar - 400 bar
Temperature: -10 °C - 120 °C
... pressure gauge valves per DIN 16271, the test pivot is sealed by a lens-type sealing ring and a screw cap placed on top; with valves per DIN 16272, the test pivot is separately isolated by an additional ...
Essential for nearly every fuel train, the Eclipse Disc Type Check valves prevent reverse gas or air flow in the system. Eclipse Series 1000 Disc Type Check Valves are ...
DN: 15 mm - 350 mm
Pressure: 16 bar
Temperature: -10 °C - 350 °C
Lift check valve to DIN/EN with flanged ends, spring-loaded valve disc, maintenance-free. Benefits Check disc and closing springs made of stainless steel for ...
BALL CHECK VALVES Ball check valves VAP, with EN 12050-4 certification, are designed for use even with soiled liquids to provide full guarantees of operation in heavy-duty ...
BALL CHECK VALVES VAP ball check valves prevent backflow during plant maintenance or stoppages. They are designed for use even with soiled wastewaters to provide full ...
They can be installed horizontal or vertical and do not require any maintenance. All Zenit ball check valves hold certification under the EN 12050-4 standard, appendix ZA.
DN: 0.25 in
Pressure: 0 bar - 30 bar
This valve can be set from 0 till 30 BAR. It is used on the lubrication point. Key features: - Pressure: from 0 to 30 bar (adjustable) - Material: galvanized steel - Diameter port. 5 mm Elastomeric-plastic seal ...
M/F oil or grease check valve available with different threads.
... lifting check valve, swing check valve and butterfly check valve three kinds: 1. Lifting check valves ...
Retaining valve with embossed directional arrow or printed in black. With conical nozzles. Various uses.
DN: 1.6 mm - 25 mm
Pressure: 0.5 bar - 6,300 bar
Temperature: 0 °C - 200 °C
... aforesaid valves allow not only to fill, but also to carry out the delivery under pressure with nominal diameters being double compared with the valves that are normally on the market for the pressure ...
DN: 0.125, 0.25 in
Pressure: 0.2, 0.4, 0.7 bar
... applications to prevent line from emptying during wash cycles. - The Ball Check Valve Assembly is for use with standard 1/8” and 1/4” NPT Male threaded nozzles. - The Ball Check Nozzle ...
DN: 0.25, 0.125 in
Pressure: 0.4, 0.7 bar
... applications to prevent line from emptying during wash cycles. - The Ball Check Valve Assembly is for use with standard 1/8” and 1/4” NPT Male threaded nozzles. - The Ball Check Nozzle ...
DN: 0.375 in
Non-Return Valve • Spring-loaded • Connection: 3/8" NPT male (2x)
DN: 0.25 in
... Directional Control Valves. The 1⁄4 NPT (500172) and the SAE-4 (500174) “P” port check valves are required on all single acting or double acting circuits where there is more than one ...
DN: 50 mm - 400 mm
Pressure: 16, 10 bar
The measurements of the flanges are corresponding to DIN EN 1092-2 Features Material: GJS (GGG) EWS (fusion bonded epoxy) coating Bolt: X15Cr13 Sealing: rubber
... prevent the explosion propagating through the pipes that connect the equipment in question to the rest of the plant. The block valve is studied, designed and tested especially to safely partition the production rooms ...
DN: 0.25 in - 4 in
Pressure: 400, 125, 175 psi
Temperature: -12 °C - 178 °C
The Series BICV Brass Inline Check Valves are ideal for use with a broad array of service mediums including compatible oils, gases, fuels and hydrocarbons. They incorporate a soft seat for a bubble-tight ...
DN: 15 mm - 350 mm
Pressure: 16 bar
Temperature: -10 °C - 350 °C
Lift check valve to DIN/EN with flanged ends, spring-loaded valve disc, maintenance-free. Benefits Check disc and closing springs made of stainless steel for ...
DN: 0.25 in - 1 in
Pressure: 0 bar - 1,500 bar
Temperature: -20 °C - 200 °C
Duff-Norton Europe ball check valves for high or low pressure hydraulic circuits prevent flow reversal in a circuit or protect against overpressure that can occur in certain parts of a circuit. Unguided ...
Duff-Norton Europe
Please specify:
Help us improve:
remaining