PRAHER check valves

DN: 14.3 mm
Pressure: 241 bar
Temperature: -54 °C - 204 °C

... style, hydraulic check valve for use as a blocking or load-holding device. Operation The cartridge valve allows flow from port 1 to 2, while normally blocking flow in the opposite ...

DN: 15 mm - 50 mm
Pressure: 0 bar - 5 bar
Temperature: -20 °C - 80 °C

* Robust Design * Small in Size * Universal Fitting position Housing made out of Brass and strainer made out of Stainless Steel Wire mesh (Max. Mesh Size 100 micron) FLUIDS : Natural Gas, LPG, Town Gas, Oxygen, Air, Other gases on request(Except ...

DN: 0.25 in - 2.5 in
Pressure: 60 bar
Temperature: 150 °C

Characteristics: Valve body machined from solid, no middle connections. The closure area is between the 2 support points of the piston. Documentation: Laser marking for traceability and validation processes. Material ...

Pressure: 3 psi - 16 psi

In-line Check Valves - General Information MICO® Residual Check Valves allow free flow of hydraulic system fluid in one direction while maintaining residual fluid ...

Pressure: 10,000 psi

Permits flow of hydraulic oil in one direction only. Operation: Installs right in hydraulic line.

DN: 0.5 in - 24 in

... steel check valves with ANSI 800, 1500, sizes ½” to 2” of bolted bonnet. Second, the ductile iron swing check valves, available in sizes from DN 50 to DN 1200, have a ...

DN: 0.5 in - 2.5 in
Pressure: 10 bar - 100 bar

Description The L10 Pressure Lock Valve is a solenoid operated check valve designed for hydraulic elevators and includes a self-closing manual lowering valve. Its purpose ...

DN: 0.5 in - 4 in

True Union Ball Check Valve (1/2"-2") and Single Union Ball Check Valve (3"-4") The Asahi/America ball check valve employs a free moving ...

DN: 10 mm - 100 mm
Pressure: 25 bar - 250 bar
Temperature: 350 °C

forged body (lifetime up to 60 years) – non-cobalt overlay Material stainless steel 08Ch18N10T, carbon steel 12 020.1 Connection butt welding ends Operating self-acting

DN: 2 in - 8 in
Pressure: 8.6 bar - 155 bar
Temperature: -29 °C - 815 °C

Swing check valve, Bolted cover Renewable disc and seat (in S.S. construction, integral seat non renewable) STANDARDS PED Quality Standard MSS SP 55 All wetted component materials meet NACE MR0175 ...

DN: 0.25, 0.375, 0.5, 0.75, 1 mm
Pressure: 2,500 psi
Temperature: -15 °C - 400 °C

Spring-loaded, compact, stainless steel check valve. 316 stainless steel Spring-loaded 2 lb. or 10 lb. cracking pressures MNPT x MNPT Usable on metering pumps and injection line applications Suitable ...

DN: 2 mm - 16 mm
Pressure: 700 bar
Temperature: -40 °C - 80 °C

Our check valves are available as screw-in or case valve models. Both models are available with the screwing-in direction blocked or with the screwing-in direction open for flow. The ...

DN: 0.5 in - 42 in

... Bidegain we manufacture non-return valves, also known as a check valves, from the complete kit to the independent components, always ensuring the highest levels of quality and optimal ...

... The vacuum controlled check valve (ARV) is a pneumatically operated on-off valve featuring low pressure loss. To activate this valve, vacuum from the intake manifold ...

DN: 50 mm - 1,350 mm
Pressure: 0 bar - 10.3 bar
Temperature: 0 °C - 178 °C

Class 125 Cast Iron Sure Check™ Valves Size: 2 to 54 in. (50 to 1350mm) Description: Designed for liquids and gases where flow reversal can cause surge and water hammer. Elastomer seats provide bubble-tight ...

DN: 0.25 in - 1.5 in
Pressure: 0 bar - 350 bar
Flow rate: 12 l/min - 310 l/min

The FPR series, manufactured by Dicsa, has a body that has been constructed out of steel. It also has a cracking pressure of 0.5 bar.

DN: 25 mm - 200 mm

Ball check valve (PN 10) Lining-Materials: * PTFE (virgin or conductive) Different lining thicknesses and flange designs on request. Other pressure rates: * PN 16 * PN 25 * ...

DN: 0.25 in
Pressure: 50, 110 psi
Temperature: 0 °F - 170 °F

Material: Acetal Copolymer Colors: Blue, Orange, Black, White, Grey Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium ...

DN: 25 mm - 1,500 mm
Pressure: 16 bar - 420 bar
Temperature: -196 °C - 550 °C

Aluminium Bronze Check Valves Valve Body materials: aluminium bronze Valve Manufacturing standards: API, ANSI, BS, DIN, JIS Valve Connection: wafer, lug, flanged

DN: 10 mm - 100 mm
Pressure: 10, 12, 16, 25, 40 bar
Temperature: -20 °C - 100 °C

Full bore check valve, F/F threaded. Temperature range: -20°C +100°C

DN: 1 in - 28 in

Mercury Products manufactures standard raincaps for heavy duty exhaust system protection and single-bolt installation with designs in 1" to 28" diameters. The precision-balanced vane, welded lid and a lubricated metal bushing are combined ...

DN: 15 mm - 100 mm
Pressure: 10 bar - 16 bar

- INOX Material - PVC-U = Unplasticised Polyvinylchloride Gaskets - EPDM Manufacture - Injection moulded Extra informatie - Flow [l/min] at which ∆p is 1 bar, determined according to DIN EN 60534-2-3.

DN: 0.125 in - 0.5 in
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 130 °C

FARBO has a wide range of valves used for the pneumatic circuitry. Besides non-return valves, available both for power circuits that control, also quick exhaust and logical OR type valves. A ...

DN: 0.5 in - 4 in
Temperature: 0 °C - 100 °C

Brass swing check valve Diameters from DN015 - ½" to DN100 - 4" Threaded F/F (ISO 228/1) NBR seal Minimum opening pressure 0,03 bar TR CU 010 compliant PN10 (PN6 for DN≥65) Free of CE marking (cat. according ...

DN: 0.5 in
Pressure: 16 bar
Temperature: 4 °C - 100 °C

Brass ball valves with incorporated stainless steel filter, check valves, a blend of manometer and darin. Ball valves are multipurpose for the hydraulic system. Valve ...