- Hydraulics - Pneumatics >
- Pump >
- Impeller pump >
- sacemi
Sacemi impeller pumps
Flow: 0 m³/h - 4,600 m³/h
Head: 0 m - 100 m
Fluid temperature: -10 °C - 180 °C
Volute casing pumps acc. to ISO 5199 Single Stage Pumps – LS, LC Horizontal single stage endsuction pump with closed impeller and oil lubricated bearing frame. Process ...
LOWARA
Flow: 6 m³/h - 48 m³/h
Head: 1.4 m - 16.3 m
Power: 0.9 kW - 1.5 kW
DATA SHEET Construction Single-impeller submersible pumps, (with two-passage) with channels impeller with vertical threaded delivery port (G 2”).Double mechanical shaft seal with interposed ...
Calpeda
Flow: 0 us gal/min - 178,000 us gal/min
Head: 0'00" ft - 152'00"
Axial Mixed Flow Pumps Vertical, wet pit design pump for Circulating Water Service (including condenser). Specifically designed for the nuclear industry, it features a number of hydraulic designs, and ...
Hayward Tyler®
Flow: 0 us gal/min - 50,000 us gal/min
Head: 60 m - 210 m
Design Features of Hayward Tyler Vertical Turbine Pumps The VS range was designed specifically for the nuclear industry and offers three different impeller types. Each impeller type ...
Hayward Tyler®
Flow: 0 us gal/min - 160,000 us gal/min
Head: 0 m - 500 m
... Suction Pumps Single-stage, horizontally or radially split pumps using a double suction impeller. Features a rugged design that is particularly suited for hazardous, safe-guarding conditions. Design ...
Hayward Tyler®
Flow: 2,000 m³/h - 50,000 m³/h
Head: 3 m - 175 m
... RANGE A wide range of available hydraulics enables customization of pump selections to maximize pumping efficiencies. Pump efficiencies up to 91% save money on operating costs. Pumps ...
Flow: 280 l/min
Head: 23 m
Power: 0.18 kW - 2.2 kW
In the TE Pump Series, the motor power is transmitted vertically to the pump impeller through an extended shaft. This rotating shaft is exclusively supported through the two motor bearings ...
Flow: 0 us gal/min - 4,000 us gal/min
Pressure: 0 psi - 175 psi
Head: 0'00" ft - 560'00"
The Series e-1510 base mounted end suction pumps deliver the highest efficiencies, performance and durability. All pumps feature stainless steel impellers and an expanded efficiency island ...
Bell & Gossett Domestic Pump
Flow: 0 us gal/min - 200 us gal/min
Head: 0'00" ft - 55'00"
Power: 0.25 ch - 3 ch
Bronze-fitted and all-bronze construction. The Bell & Gossett Series 60 is a maintenance-free pump and motor design. This design provides a worry-free, install-and-forget operation. The design incorporates the patented ...
Bell & Gossett Domestic Pump
Flow: 0 us gal/min - 7 us gal/min
Pressure: 150 psi
Head: 0'00" ft - 14'00"
... MPP) tracking. The ecocirc solar pump can be used for most circulation pump applications without connection to the power grid. Instead the solar pump can be directly connected to the ...
Bell & Gossett Domestic Pump
Flow: 600 m³/h
Pressure: 16 bar
Power: 200 kW
... type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures vibration and noise free operation for long life. Mounting and duties are in ...
C.R.I. Pumps
Flow: 720 m³/h
Pressure: 16 bar
Head: 110 m
... stage chemical process pumps are mainly used to handle different type of chemicals with slight impurities. These pumps are offered with different material of construction according to the liquid type. ...
C.R.I. Pumps
Flow: 2,500 m³/h
Pressure: 16 bar
Head: 100 m
... optimum clearance between impeller and wear plate. To maintain impeller clearance external adjustment provision is provided to maintain required efficiency. Features Back pull out design High efficiency Non ...
C.R.I. Pumps
The axial flow pump is mainly composed of front and back shell, main body, impeller, guide vane, bearings and motor. The impeller, is installed at the end of the shaft directly, rotates ...
ERG Technology
Flow: 18 m³/h - 504 m³/h
Power: 0.75 kW - 160 kW
Fluid temperature: -15 °C - 120 °C
... is in the center of the pump legs, which improves the performance smoother and contributes to longer service life. - The inlet and outlet are inline structures, which simplifies the installation of the pipelines. -The ...
Shanghai Kaiyuan Pump Industrial Co., Ltd.
Flow: 0.5 l/s - 80 l/s
Pressure: 0.2 MPa - 2.25 MPa
Power: 1.5 kW - 200 kW
Kaiyuan XBD-I Series Vertical Fire Pump is designed for middle or low pressure situation. This model meets the fire pump requirements such as performance, structure, material etc. -Vertical Structure( ...
Shanghai Kaiyuan Pump Industrial Co., Ltd.
Flow: 8 m³/h
... QDLF is a latest vertical multistage pump with light weight. It has the features of energy-saving, environmental friendly, less space demand, easy installation, stable performance and convenient maintenance. The pump ...
Shanghai Kaiyuan Pump Industrial Co., Ltd.
Flow: 104 m³/h
Head: 36 m
Power: 0.34 kW - 7.5 kW
vertical single-stage immersion pump in block design equipped with a freewheeling shaft for protection against dry running Broad range of applications through diverse construction and material combinations Excellent ...
Flow: 1,136 m³/h
E~Z Lift Reel System "Neptune" pump Product Category: SPECIALIZED PUMPS The ClydeUnion S&N Pumps E~Z Lift "Neptune" is a fully automated, safe, overboard deployed..... ClydeUnion ...
Flow: 110, 140, 70, 90 us gal/min
Head: 19.8, 18, 21.3, 12 m
Power: 0.75, 1.5, 0.4 kW
... electric submersible pump The GSP05 model is available in 0.5 hp (0.4 kW) and offers a flow rate of 70 US GPM (4.4 l/sec) and maximum heads to 39 ft (12 m). With a slimline top discharge design only 7.2 in (183 ...
Alcon
Flow: 0 m³/h - 1,000 m³/h
Power: 1.3 kW - 310 kW
... Excellent flow passing properties Motors with high power density Robust and reliable COMPACT CHOPPER PUMPS CUT SUMP PROBLEMS DOWN TO SIZE The Flygt F 3069 chopper pump is specifically ...
FLYGT
Flow: 2,600 m³/h
Pressure: 10, 15 MPa
Head: 300 m
Single-stage radial impeller radially split volute, horizontal, centerline mounted. Axial suction, radial discharge, suction and discharge flange pressure rating is the same. The axial force in the pump ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 1,000 m³/h
Pressure: 5 MPa
Fluid temperature: 30 °C - 230 °C
... single suction radial impeller, radially split volute. Axial suction, axial discharge, the center of suction and discharge ports are located on the same horizontal line, vertical installation, small footprint, ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 2,000 m³/h
Pressure: 2.5 MPa
Head: 160 m
Single-stage radial impeller, horizontal, radially split volute, foot mounted. Axial suction, radial discharge, suction and discharge flange pressure rating is the same. Dimensions and performance meet and exceed ISO2858 ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 1.4, 4, 9, 20, 28 m³/h
Pressure: 2 bar - 4 bar
Power: 0.75, 1.5, 3 kW
The RF pump is a flexible impeller pump. Due to the design, these pumps are reversible, self-priming and can suck from a maximum height of 5 meters. This type of pump ...
Flow: 93, 74 l/min
Head: 11, 26 m
Power: 640 W
... galvanic industry beside JP-280. This handy, very robust and powerful motor can be used to drive the suction tubes of drum pumps. In this combination it is suitable for many thin liquid and slightly viscous, neutral, ...
Dr. Jessberger GmbH
Flow: 20 l/min - 49 l/min
Head: 7, 9, 10, 5 m
Power: 250 W
... ventilated universal motor. The lightweight, handy and powerful device can be used as drive for the pump tubes of the laboratory and drum pumps and is useful in this combination for many thin fluid, ...
Dr. Jessberger GmbH
Flow: 18, 33, 42 l/min
Pressure: 6 bar
Head: 5, 6, 8 m
... used as drive for the laboratory and drum pump tubes and is suitable in this combination for many thin liquid, neutral and aggressive media. Flammable media are not allowed to be transferred with the laboratory pump ...
Dr. Jessberger GmbH
... suited for transferring toxic, dangerous and WHC goods. These magnetically coupled pumps are designed for applications with special safety requirements. The open impeller is connected to the driving unit ...
• Magnetic drive pump made of plastic material • Closed or open impeller pump in AISI304 or AISI316 • Connectors in PP, PVC, PVDF • Pumps with membrane in plastic material or steel
Flow: 0 m³/h - 138 m³/h
Head: 0 m - 60 m
Power: 3, 4 kW
The free-flow immersion pumps type FZ are equipped with a recessed impeller that makes this model ideal for pumping media with high solids loading or abrasive media such as lubricants and waste water. ...
SCHMALENBERGER GmbH + Co. KG
Flow: 0 m³/h - 108 m³/h
Head: 0 m - 50 m
Power: 3, 4 kW
... quick suctioning immersion pumps type SZ are ideal for pumping media with high air inclusion such as emulsions, grinding and cutting oils. The impeller of the SZ is a combination of an open impeller ...
SCHMALENBERGER GmbH + Co. KG
Flow: 0 m³/h - 120 m³/h
Head: 0 m - 57 m
Power: 3, 4 kW
... Closed impeller for high efficiency With cover plate for the tank Characteristic field extendable with the use of a variable speed drive Free ball passage up to 10 mm Also available with 4-pole motor Areas of ...
SCHMALENBERGER GmbH + Co. KG
Flow: 0 m³/h - 6,400 m³/h
Head: 0 m - 140 m
... Waste Warrior tackling aggressive plugging. Installed pumps see dramatic increases in up-time, with thousands of dollars a year in savings. Cornell can install the cutter assembly in more than 30 pump ...
Cornell Pump
Flow: 0 us gal/min - 7,000 us gal/min
Fluid temperature: 550 °F
... Fully-machined impellers Heavy-walled castings Two-year warranty Low cost of repair High efficiency Hot Oil Pumps hotoilpumpEnhanced vapor handling and improved sealing technology ...
Cornell Pump
Flow: 0 m³/h - 6,400 m³/h
Head: 0 m - 140 m
... Specifications: Available on a range of pumps with discharge sizes from 4″ to 30″ Withstands up to 30′ subergence Can be submerged up to two weeks Available on N, NN and NH series pumps Features ...
Cornell Pump
Flow: 0.2 us gal/min - 0.8 us gal/min
Head: 8'03"
Fluid temperature: 40 °C
... per second. Each pulse draws the armature and impeller forward against the spring, causing the impeller to pump a volume of liquid out through the outlet port. The spring then returns ...
Gorman-Rupp Industries
Head: 20 m - 500 m
... conditions demand a robust and reliable solution. That’s where GE's condensate extraction pumps come in. Extraction pump expertise Various tested configurations Our pumps are designed ...
Flow: 9.4 m³/h - 21.6 m³/h
Pressure: 16 bar
Head: 0 m - 49 m
Vertical single-stage submersible motor pump for wet installation, with cutter (S), stationary or transportable version. Amarex N pumps are floodable, single-stage, single-entry close-coupled pump ...
KSB
Flow: 6.8 m³/h - 636 m³/h
Pressure: 69 bar
Head: 1,372 m
The VICR is a type VS6 vertically suspended can radial high performance pump that is suitable for prime fluids. Delivering High Head at Low Flows Nominal Rotating Speeds for Extended Life Cycle Multiple stages in ...
Goulds Pumps
Flow: 120 l/min - 21,000 l/min
Head: 11.3 m - 86 m
Power: 0.4 kW - 75 kW
WEDA small electric submersible pumps and accessories are designed for an extensive range of dewatering applications, across multiple industries. WEDA water pumps feature a built-in starter ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining