- Electricity - Electronics >
- Electronic Component >
- Electronic filter >
- SCHURTER
SCHURTER electronic filters
Frequency: 400 Hz
Voltage: 0 V - 250 V
Primary current: 1 A
... EMI, EMC, & RFI Power Line Filter from BLA ETECH. Designed for single phase applications it has general purpose filtering performance and good noise suppression. Rated at 1 amp, the single stage BL2010-01-F ...
CD Automation UK Ltd
Frequency: 50 Hz
Voltage: 380 V
Primary current: 188 A
Sikes passive harmonic filter is designed for almost any kind of electronic applications with six pulse front end rectifiers . The filter can efficiently reduce the harmonic current distortion ...
Shenzhen Sikes Electric Co., Ltd.
Frequency: 50 Hz
Voltage: 400 V
Primary current: 100 A
EMI/EMC filter dedicated for Rail and transportation . The train electrical system is very complex with many big power electrical devices resulting in severe electromagnetic interference . This products is specially designed ...
Shenzhen Sikes Electric Co., Ltd.
Frequency: 50 Hz
Voltage: 400 V
Primary current: 10 A
Optimize harmonic performance Advanced Harmonic Filter PHF 005/010 is a cost-effective total solution. Compared to traditional harmonic trap filters PHF offers a smaller foot print and higher harmonic ...
Shenzhen Sikes Electric Co., Ltd.
Voltage: 75 V
Primary current: 10 A
Rated at 10A with a maximum voltage of 75V, this board mounted EMC filter offers exceptional differential mode performance, making it ideal for use with DC-DC converters and thus saving on printed circuit board area. ...
Frequency: 500 kHz
Voltage: 0 V - 50 V
Primary current: 0.8 A
... series of hybrid EMI filters is operable over the full military (-55 °C to +125 °C) temperature range with no power derating. The DVMSA28 EMI filter is designed to filter conducted emissions ...
VPT Inc
Frequency: 160 MHz
RRF-160-NFF 160MHz Band Pass Filter PolyPhasers weatherized band pass filter surge protector is designed for 160 MHz railroad wayside applications. Specifically designed for rail PTC systems the RRF-160-NFF ...
Frequency: 100 MHz
Voltage: 50, 60 V
Primary current: 90 mA - 2,000 mA
Current compensated data line filter High common mode noise suppression at high frequencies Small influence on high speed signals through winding symmetry Climatic category 40/105/21 (Size 0603) Climatic category ...
Würth Elektronik eiSos
Frequency: 4 kHz
Voltage: 200 V - 690 V
Primary current: 12 A - 1,500 A
DU/dt filters are used for filtering voltage increase rate and voltage peak value in motor input. With Trafox DU/dt filters, lengths up to 100–300 m can be reached, facilitating even ...
Frequency: 1.5 kHz - 4 kHz
Voltage: 380 V - 500 V
Primary current: 10 A - 460 A
The Sine filters are used for filtering high frequency interference in the input voltage of a motor in order to achieve cleaner sinusoidal voltage. High frequency interference is a great risk for motor ...
Frequency: 500 kHz
Voltage: 70, 40 V
Primary current: 10, 20 A
SynQor provides EMI filters for the Hi-Rel series DC-DC converters. All EMI filters provide >50dB or >80dB differential mode attenuation (model dependent) and >60dB common mode attenuation and include ...
SYNQOR
Frequency: 500 Hz
Voltage: 400, 500 V
Primary current: 3, 2, 1 A
SynQor provides EMI filters for the Hi-Rel series DC-DC converters. All EMI filters provide >50dB or >80dB differential mode attenuation (model dependent) and >60dB common mode attenuation and include ...
SYNQOR
Frequency: 250, 500 kHz
Voltage: 40 V - 210 V
Primary current: 70, 10, 40, 30 A
SynQor provides and DC-DC EMI filters for the Mil-COTS series converters. All EMI filters provide differential mode attenuation and common mode attenuation (model dependent) and include stabilizing bulk ...
SYNQOR
... Technologies FBAR (Film Bulk Acoustic Resonator) filters are a form of bulk acoustic wave (BAW) filter that have superior performance with steeper rejection curves compared to surface acoustic wave (SAW) ...
All ROPEX temperature controllers require a line filter in order to comply with EMC directives and ensure CE conformity. Line filters damp the reaction of the phase control on the line and protect the ...
3-Phase Filters LF-10520 rated current 10 A @ 50°C LF-20520 rated current 20 A @ 50°C LF-30520 rated current 30 A @ 50°C LF-50520 rated current 50 A @ 50°C
Frequency: 50 Hz - 60 Hz
Voltage: 520 V
Primary current: 8 A
... Benefits Increase in the interference immunity of the connected equipment Efficient filter effect against line-bound interference emissions Single-stage filter concept Reduced leakage current ...
Frequency: 320 MHz - 2,500 MHz
... example in cordless telephones and mobile transceivers there is a need of high selectivity RF filter circuits. We have developed a series of helix filters providing an improved performance in such applications. At ...
Frequency: 915 MHz
Voltage: 5 V
SAW Filter SAW Filter, usually called SAW, makes use of the piezoeletricity effect, to convert the input signal into mechanical energy with input and output transducer. After a procedure of processing, ...
Frequency: 144 MHz - 470 MHz
... transmitter. Pass/reject filters are irreplaceable when the spacing between RX frequency and the interfering signal so small, that the slop of normal pass filters or reject filters are ...
CSTEL
Frequency: 144 MHz - 470 MHz
... narrow pass band. Filters allow to handle up to 200 watts power. There are one, two, or three cavities filters available. More cavities provide greater selectivity and, when required, a wider pass-band. ...
CSTEL
Frequency: 144 MHz - 470 MHz
... narrow pass or reject spacing. Filters allow to handle up to 200 watts power. There are single or dual cavity filters available. More cavities provide greater rejecting, when required, a wider notch. ...
CSTEL
The series of Harmonic filter reactors, which is manufactured by Entes, is device that is suitable for use in serial connection with capacitor banks in power factor correction components. By utilizing these kinds of reactors, ...
Frequency: 50, 60 Hz
Voltage: 120, 250 V
Primary current: 3, 6, 10 A
Features Single stage Chassis mounting High reliable High performance Fast on 6.3 x 0.8 mm terminals for input & output
Elcom
Frequency: 10.7 Hz
Murata’s ceramic filter series (CERAFIL®) offers small and lightweight filters and traps that use the piezoelectric properties of ceramics to treat intermediate frequencies used in AV and communication equipment.
Murata Electronics
Frequency: 60, 50 Hz
Voltage: 300, 520 V
Primary current: 3 A - 20 A
• Line filter as standard, industrial and medical version • 1 stage • Filter with standard or high attenuation (HP) Unique Selling Proposition • Compact single-stage filter • Various ...
SCHURTER
EMI filters are low-pass, band-pass, or high-pass filters combined with ESD protection diodes. They also integrate pull-up and/or pull-down resistors, depending on the application. ST EMI filters ...
... switched-capacitor filters (SCFs) operate from a single +5V (MAX7418–MAX7421) or +3V (MAX7422–MAX7425) supply. These devices draw only 3mA of supply current and allow corner frequencies from 1Hz to 45kHz, making them ...
Frequency: 5 Hz - 150 Hz
Voltage: 0 V - 500 V
Primary current: 110 A
... Optimized drive efficiency Major reduction of leakage currents Elimination of bearing currents Applications Sine filter for the suppression of differential mode interference and common mode interference.
Block Transformatoren-Elektronik
ON Semiconductor offers LC, RC, and common mode filters for a wide variety of audio and data interfaces.
Frequency: 60, 50 Hz
Voltage: 380 V
Primary current: 15 A - 300 A
Active power filter (APF:Active power filter) with parallel connected to the grid, through real-time detecting the load harmonic and reactive component and the PWM converter technology, and harmonic and ...
Frequency: 50, 60 Hz
Voltage: 208 V - 690 V
Primary current: 50 A - 450 A
Overview Active Power Filter (APF) is a new type electronic device which is used to prevent dynamic harmonic and compensate reactive power. It can compensate the size-changing and frequency-changing ...
Frequency: 50 Hz - 60 Hz
Voltage: 380 V - 480 V
Primary current: 190, 250, 310, 400 A
The flexible filter for central/decentral harmonic mitigation The VLT® Advanced Active Filter AAF 006 improves system efficiency and increases grid robustness to avoid downtime. It can compensate for ...
Danfoss VLT Drives
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining