Volumetric flow rate: 0.1 m³/h - 2,700 m³/h
Process temperature: 0 °C - 120 °C
Process pressure: 250 bar
... proportional to the volumetric flow rate. The effects of increasing viscosity reduce the linear flow range and shifts the k-factor. Further, the effect of viscosity depends on the frequency (RPM of rotors). ...
KOBOLD Messring GmbH
Process temperature: 0 °F - 302 °F
Process pressure: 0 psi - 232 psi
... M5000 is a battery-powered electromagnetic flow meter with a very high accuracy even at very low flows. The excellent repeatability as well as the above-average battery life makes this ...
Badger Meter
... ten samples per second, with some limitation of number of recorded channels). 1.5GB of internal data memory is enough for continuous recording of all channels with a speed of 1 sample per second (each channel) for over ...
The MultiCon CMC-99 is a powerful and versatile compact-multichannel-controller with a capability to record data, if the recording function is requested and activated. Thanks to that it is one of the first industrial devices which integrates ...
As a result of extending the range of functional applications of the MultiCon product line, the CMC-N16 wall mounted model has been designed. The new IP 65 enclosure allows using the device in harsh environments, where safe installation ...
Precision: 0.1 %
The Flow-Meter DF9648 is used in food technology, chemical andpharmaceutical industry and water technology. In connection with any type of pulse flow sensor the current flow ...
Process temperature: 0 °C - 100 °C
Process pressure: 100 bar
The flow meter consists of a spinner which is rotated by the flowing medium. The rotor's rotational speed is proportional to the flow volume per unit time. The rotor is fitted with magnets. ...
Volumetric flow rate: 1.8 l/min - 1,133 l/min
Process temperature: -20 °C - 80 °C
Process pressure: 250 bar
... rotational speed is proportional to the flow rate. The rotational speed is detected by means of a biased Hall sensors, i.e. there are no magnets in the flow chamber. ●High precision ●No magnetic ...
Process pressure: 0.6 mbar - 4 mbar
Precision: 0.2 %
... Robust housing Excellent flow mesurement accuracy, can measure duplex flow, electromagnetic debimeter with 4-20mA and other outputs General Features Excellent small flow mesurement ...
ATEK SENSOR TECHNOLOGIE
Volumetric flow rate: 4 l/h - 200,000 l/h
Process temperature: -50 °C - 200 °C
Precision: 5, 2 %
New-Flow offers a large variety of products for measurement and control of temperature, pressure, flow, level, and valve.
Golden Mountain Enterprise
Volumetric flow rate: 1 l/h - 2,000,000 l/h
Process temperature: -50 °C - 400 °C
Precision: 2, 1.6 %
Case Material: Aluminum alloy case with paint, SS316 available Body Wetted Parts Material: SS316; SS316+PTFE lining (PVDF float); Others on request; Indication via magnetic coupling (no sealed) Options; Micro Switch 5A/125VAC, 5A/250VAC, ...
Golden Mountain Enterprise
Volumetric flow rate: 0.4 l/h - 120,000 l/h
Process temperature: -40 °C - 180 °C
Precision: 2, 1.6 %
New-Flow offers a large variety of products for measurement and control of temperature, pressure, flow, level, and valve. Case Material: SS316
Golden Mountain Enterprise
Process temperature: -15 °C - 85 °C
Integral Ultrasonic Flow meter for liquid measurement The S-flow flow meter contributes to energy savings and production process solutions. Reduces ...
Process temperature: -40 °C - 200 °C
Precision: 1 %
REDUCE YOUR PRODUCTION COSTS AND SAVE ENERGY This ultrasonic portable flow meter is ideal for detecting and stopping leaks. This ultrasonic portable flow meter ...
The Fuji Electric biogas flow meter provides instantaneous and totalized measurements of the biogas flow to know the quantity and quality produced. Optimisation of the biogas fermentation ...
Precision: 0.25, 0.4 %
Repeatibility: 0.5 %
... various sensor parameters, anticipating possible problems. The battery converter with integrated modem MV255, flow meters, energy meters, contact our specialists.
ISOIL Industria Spa
Process temperature: -10 °C - 60 °C
Precision: 3, 0.5, 1 %
Repeatibility: 0.15 %
... Description The ultrasonic flow meter clamp-on for fixed installation IFX-F100, flow meters, energy meters, ultrasonic flowmeters, and industrial ...
ISOIL Industria Spa
Process temperature: -30 °C - 130 °C
Precision: 1, 3, 0.5 %
Repeatibility: 0.15 %
... the Modbus. Description The portable clamp-on flow meter IFX-P210, flow meters, energy meters, ultrasonic flowmeters, and industrial automation systems ...
ISOIL Industria Spa
The SeFlow 400 is Sewerin’s single channel portable flowmeter for applications in the municipal water and wastewater sector offering long term stable and precise bidirectional flow measurements in remote ...
Volumetric flow rate: 12 l/min - 250 l/min
Process temperature: -20 °C - 90 °C
Process pressure: 16 bar
... form a Kármán vortex street in the flow. The distance between the individual vortices is constant. The frequency at which the vortices flow past a sensor depends on the flow velocity ...
SIKA
Volumetric flow rate: 0 l/min - 0.1 l/min
Process temperature: 5 °C - 50 °C
Process pressure: 0 bar - 5 bar
Micro Flow Rate Liquid Flow Meter By combining a thermal MEMS sensor and a highly corrosion-resistant quartz glass flow path, the product can measure micro flow ...
... ultrasonic technology for mobile and highly accurate flow measurements Special features: ■ Very high measurement accuracy (also bidirectional) ■ Accurate even at extremely low flow rates (e.g. minimum ...
Volumetric flow rate: 5 l/min - 10 l/min
Process temperature: 0 °C - 60 °C
Process pressure: 6 bar - 20 bar
FLOW MASTER is a flow volumetric device which allows the constant monitoring of the lubrication delivering. As the measurements are volumetric, they don’t depend on temperature or viscosity but they ...
Volumetric flow rate: 10 l/min - 100 l/min
Process temperature: 16 °C
Process pressure: 30, 70 bar
... of the flow meters. It guarantees a safe dispensing without impurities, which may result in unpleasant blocks while dispensing. HIGH PRECISION The K600 B/3 flow meter ...
Process temperature: -20 °C - 800 °C
Measurement of the volume flow, especially in dusty applications. Easy installation on existing ducts, no Venturi or similar conversions are required. Can be used in environments with low dust loads or in harsh conditions ...
Process temperature: 150 °C
Process pressure: 150 bar
... reagent in flue gas treatment and transport lines with very low material concentration Electrodynamic flow sensor for measurement of low flow rates from 0 to 100 kg/h. For pipe diameters up to 1 ...
Process temperature: 0 °C - 120 °C
Process pressure: 10 bar
... or ducts • No real upper limit of mass flow • Maximum pressure 10 bar • Dust tight • No flow restrictions to the process flow (wear resistant ceramic liner) • The mass flow ...
Volumetric flow rate: 0.5 l/h - 60 l/h
Process temperature: -20 °C - 100 °C
Process pressure: 0 Pa - 400,000 Pa
Corrosion-resistant materials Easy to install Easy measuring tube replacement Limit switch optional Flow meters perform different tasks in conditioning systems for gas analysis. The typically quite ...
... transmitters of DA2000er series: • Large analog display (270 °) – Scale length 250 mm • Scale in m³ / h • Different limit indicator • Analog outputs 0 … 10 V or 4 … 20 mA possible (linear or square root) • Combination ...
Volumetric flow rate: 2 l/min - 160 l/min
Process temperature: 85 °C
Process pressure: 0 bar - 2.3 bar
Axial turbine flowmeter for liquids • For measuring the volume flow rate or for dosing tasks with large flow rates • Designs and specifications see data sheet Technical data and ...
Process temperature: 0 °C - 70 °C
Process pressure: 1.6 MPa
Precision: 2.5 %
Electromagnetic flow meter can only measure the flow of conductive liquid, gas, oil and most organic liquid is not the case of conductive liquids. YFM integrated electromagnetic flow ...
Xi'an Yunyi Instrument Co., Ltd.
Process temperature: -30 °C - 160 °C
Process pressure: 0 MPa - 2.5 MPa
Precision: 0.5, 1 %
This flow meter transducer is inline measurement for long- term . The convertor and transducer are installed fixing on the pipe , with the advantages of small size , low cost and easy operation . Water ...
Xi'an Yunyi Instrument Co., Ltd.
Mass flow rate: 360 kg/h - 2,000,000 kg/h
Process temperature: -70 °C - 300 °C
Process pressure: 86,000 Pa - 106,000 Pa
Coriolis mass flow meter (also known as Coriolis mass flow meter) is a kind of mass flow meter with high measurement accuracy. The principle ...
Xi'an Yunyi Instrument Co., Ltd.
Volumetric flow rate: 0.1 m³/h - 9.5 m³/h
Process temperature: -20 °C - 130 °C
Process pressure: 0 bar - 64 bar
The RIF100 is an electromagnetic flow meter that utilizes Faraday's principle to measure the velocity of the liquid and convert it into a signal proportional to the flow. Among its ...
Riels Instruments
Volumetric flow rate: 0.2 l/min - 100 l/min
Process temperature: -10 °C - 60 °C
Process pressure: 16 bar
... 1 x Analog passive 4...20 mA + 1 x Frequency/Pulses NPN Analog output functions - Volumetric flow Frequency output functions - Volumetric Flow, Mass Flow
Riels Instruments
Volumetric flow rate: 0.2 m³/h - 26.5 m³/h
Process temperature: 0 °C - 150 °C
Process pressure: 10 bar - 16 bar
The RIF130 is an electromagnetic flow meter that utilizes Faraday's principle to measure the velocity of the liquid and convert it into a signal proportional to the flow. Among its ...
Riels Instruments
Process temperature: -196 °C - 450 °C
Process pressure: 6 bar - 420 bar
Precision: 0.2, 1, 0.5, 2.5, 1.5 %
... flow meter developed by modern digital intelligent processing technology. Application : ●Natural gas, flare gas, and other gas flow measurement ●Compressed air measurement ●Oxygen, ...
Holykell
Volumetric flow rate: 0.1 m³/h - 381,703.5 m³/h
Process temperature: -10 °C - 60 °C
Process pressure: 0 bar - 250 bar
Electromagnetic Flow meter consisted of 4800-type flow sensor and 4800-type smart converter 4800-E Sanitary type supporting. It applies to measure (is fit for the measurement of ) the ...
Holykell
Process temperature: -30 °C - 160 °C
Precision: 1 %
Repeatibility: 0.5, 0.2 %
The Economic type Clamp-on Ultrasonic Water Flowmeter can be applied to a wide range of pipe flow measurements. Applicable liquids include pure liquids as well as liquid with small quantity of tiny particles. ...
Holykell
Volumetric flow rate: 0.5 l/h - 550 l/h
Process temperature: -20 °C - 120 °C
Process pressure: 34, 15 bar
The Micropulse range of positive displacement flowmeters offer a high level of accuracy and repeatability. These precision meters can be used for flowrate measurement, in flow monitoring ...
Filton Process Control Engineering
Volumetric flow rate: 0.9 m³/h - 6,627 m³/h
... ultrasonic level transmitter - Level transmitter can be used for all flume types - Displaying of flow measurement and average or total flow - Certification of measurement Applications - ...
Process temperature: -30 °C - 160 °C
Process pressure: 2.5 MPa
Precision: 1 %
The AI.FFSONIC.INLINE flow measurement system is composed of a digital converter and two ultrasonic transducers with in-line insertion on the pipes. The transit time of a fluid, inside a cylindrical section tube, is the ...
ASIT ITALIA
Process temperature: 0 °C - 60 °C
The flowmeter for open channels is available in the version with electronic unit for wall mounting, and the Ultraflow model sensor is always included. The same is used to measure different parameters of the channel on ...
ASIT ITALIA
Process temperature: 0 °C - 60 °C
The flow meter for open channels is available in the version with portable electronic unit, and the Ultraflow model sensor is always included. The same is used to measure different parameters of the ...
ASIT ITALIA
Precision: 0.2 %
... ADVANTAGES OF ELECTROMAGNETIC FLOWMETERS OVER OTHER FLOWMETERS · There are no mechanical parts that prevent the flow and reduce the pressure. · Measurement scale; It is ...
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
... precise flow measurements can be made without the need for costly modifications on the existing line. There are no mechanical parts that prevent the flow or reduce the pressure. measurement scale; It ...
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
Mass flow rate: 2.2 kg/h - 243,954.9 kg/h
Volumetric flow rate: 0.5 m³/h - 14,000 m³/h
Process pressure: 1 bar - 25 bar
... rich self-checking information make easy maintenance and debugging * Independent password setup, the parameters setup, total flow reset and calibration can be set with different- level passwords, it is convenient for ...
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
Please specify:
Help us improve:
remaining