Volumetric flow rate: 0 m³/h - 3,000,000 m³/h
Process temperature: -20 °C - 850 °C
... For continuous volume flow measurement in dry gases. Reliable, even under extreme operating conditions. FEATURES Continuous measurement of velocity and volume flow Double-sided ...
Volumetric flow rate: 90 m³/h - 1,195 m³/h
Process temperature: -30 °C - 80 °C
Process pressure: 0 bar - 40 bar
... mass flow sensor for integration on machines and downstream of treatment units. It combines a removable sensor insert with modern digital interfaces for energy monitoring and process control. No inlet section is required due to the integrated ...
BERG Kompressoren GmbH
Volumetric flow rate: 45.54 m³/h - 47,880 m³/h
Process temperature: -30 °C - 110 °C
Process pressure: -1 bar - 50 bar
... by the flowing gas is proportional to mass flow; the temperature difference is used to calculate mass flow.
BERG Kompressoren GmbH
Volumetric flow rate: 290 m³/h - 2,840 m³/h
Process temperature: -30 °C - 80 °C
Process pressure: -1 bar - 16 bar
... mass
flow
meter VA 520 (inline)
Brand
CS-Instruments
Product information
The VA 520 is a thermal
mass (calorimetric)
flow
meter for ...
BERG Kompressoren GmbH
Volumetric flow rate: 1.6 l/h - 800 l/h
Process temperature: -40 °C - 180 °C
Process pressure: 2 bar
... - Float-type flow meter with needle valve in the gas inlet - With monostable, optical flow monitoring w/o evaluation electronics - Completely electrically heated up to +180 °C [+356 °F] - With integrated ...
Process temperature: -25 °C - 70 °C
... - Optical flow alarm sensor for bistable and monostable use - Bistable: sensor detects if sufficient or low flow is present - Monostable: sensor detects set flow value - For float-type flow ...
Volumetric flow rate: 10 l/h - 600 l/h
Process temperature: -40 °C - 85 °C
Process pressure: 2 bar - 25 bar
... engines with CommonRail fuel injection system and analogs. DFM D differential fuel flow meter is a tool for direct fuel consumption measurement, the data from the flow meter is used ...
Volumetric flow rate: 20 l/h - 4,000 l/h
Process temperature: -40 °C - 85 °C
Process pressure: 0.5 bar - 25 bar
... consumption and generates an output signal, which is sent to telematics unit (GPS tracker). New generation of DFM Marine S7 flow meters for fuel consumption measurement and engine operation time tracking – data transfer ...
Volumetric flow rate: 2 l/min - 160 l/min
Process temperature: 0 °C - 85 °C
Process pressure: 0.1 bar - 2.3 bar
... Axial turbine flowmeter for liquids • For measuring the volume flow rate or for dosing tasks with large flow rates. • Compact design. • Wide useful operating range. • Wide variety of applications: ...
Volumetric flow rate: 0 m³/h - 2,545 m³/h
Process temperature: -25 °C - 90 °C
Process pressure: 4, 2.5, 1.6 MPa
... Electromagnetic flowmeter type PEM-500 is applicable to the measurement of flow of the liquids with minimum conductivity of 5ěS/cm. Device measures flow and volume of liquids in both directions of flow. ...
... compressed air flow meter is designed to be easy to use, affordable and it's offering a wide measurement range. This makes it easy for you to choose the right flow meter, the S401 which ...
SUTO iTEC GmbH
... easier. The S421 is the perfect meter to monitor your compressed air system and measure the compressed air flow and consumption. Features Easy and affordable sensor solution to measure the compressed air ...
SUTO iTEC GmbH
... With the S402 OEM thermal mass flow meter, SUTO is completing its flow meter product range. The S402 OEM is made for compressed air system and solution providers, offering an affordable ...
SUTO iTEC GmbH
Volumetric flow rate: 0 l/min - 525 l/min
Process temperature: -40 °C - 210 °C
Process pressure: max 450.0 bar
... VSI+
flowmeters measure the volume
flow of the medium according to the gearwheel
principle. A gearwheel pair fitted very precisely in the housing forms the measuring
unit. The rotation of the measuring unit ...
VSE Volumentechnik GmbH
Volumetric flow rate: 0 l/min - 3,000 l/min
Process temperature: -40 °C - 210 °C
Process pressure: 0 bar - 450 bar
... viscosity oil or viscous resin - RS flow meters are the ideal solution for precise flow measurement. Thanks to various bearings, tolerances, materials, coatings, electronics and resolutions, VSE finds ...
VSE Volumentechnik GmbH
Volumetric flow rate: 0.1 l/min - 150 l/min
Process temperature: 0 °C - 80 °C
Process pressure: 0 bar - 200 bar
... we have launched the VSE EF ecoflow series onto the market. The VSE EF ecoflow aluminium flow meter uses the same gearwheel pairs as in the VS. The flow meters work in accordance with ...
VSE Volumentechnik GmbH
Process temperature: -40 °C - 130 °C
Precision: 1 %
... battery that provides up to 16 hours of
continuous operation, all stored in a sturdy aluminum carrying case.
Main Technical Specifications
Accuracy: ±1% of the measured value
Flow Range: ...
ASIT ITALIA
Process temperature: -30 °C - 160 °C
Precision: 1 %
... the ultimate professional solution for precise liquid flow measurement in closed ducts. Based on transit-time ultrasonic technology, this system ensures accurate measurements without interrupting flow or cutting pipes, ...
ASIT ITALIA
Process temperature: 0 °C - 60 °C
... series?
Unlike traditional
meters, this system combines a dual measurement principle (pressure and velocity) in a single compact body, ensuring reliable data for calculating instantaneous and total
flow rate.
Main ...
ASIT ITALIA
Volumetric flow rate: 0 l/min - 10,000 l/min
Precision: 0.2, 0.5 %
Repeatibility: 0.15 %
... thermal mass flow instruments which provide accurate, fast and convenient gas measurement and control. The color touchscreen display allows for local adjustments and monitoring of gas flow. Powerful and intuitive menus ...
Mass flow rate: 1 kg/h - 20,000 kg/h
Process temperature: -20 °C - 450 °C
Process pressure: 6, 30 bar
... Microwave-based flow measurement for bulk solids MF 3000 Numerous bulk material applications require continuous measurement of mass flow, e.g. for exact dosing of a material or to ...
Process temperature: -40 °C - 85 °C
Precision: 1 %
Repeatibility: 0.1 %
... Low power consumption enables operation using solar cells - Recognition of flow direction - Measuring range from +/- 0.10 to +/- 15 m/s (depending on the flow conditions) - Recognition of hysteresis-effects - ...
SOMMER Messtechnik GmbH
Process temperature: -40 °C - 85 °C
Precision: 1 %
... TRANSMISSION IN COMPACT Housing The RQ-30 ADMS is an all-in-one discharge measurement System. It contains the non-contact flow velocity and water level sensors of the RQ- 30 and applies the same algorithms and model to calculate the ...
SOMMER Messtechnik GmbH
Process temperature: -40 °C - 85 °C
Precision: 1 %
Repeatibility: 0.1 %
... .10 to +/- 15 m/s (depending on the flow conditions) Fields of application The main advantage of the RQ-30d is that the discharge can be measured more precisely, especially in rivers and streams where the flow ...
SOMMER Messtechnik GmbH
... transmitters of DA2000er series: • Large analog display (270 °) – Scale length 250 mm • Scale in m³ / h • Different limit indicator • Analog outputs 0 … 10 V or 4 … 20 mA possible (linear or square root) • Combination with a pressure ...
Volumetric flow rate: 0 l/min - 12 l/min
Process temperature: 0 °C - 60 °C
Precision: 3 %
... Overview
The CM series clamp-on ultrasonic
flow sensors /
flow
meters are compact, non-invasive devices with embedded electronics. They attach to flexible plastic tubing to measure liquid ...
XY-TEK
Volumetric flow rate: 0 l/min - 100 l/min
Process temperature: 0 °C - 60 °C
Precision: 3 %
... Overview
The CM series clamp-on ultrasonic
flow sensors /
flow
meters are compact, non-invasive devices with embedded electronics. They attach to flexible plastic tubing to measure liquid
flow rate and detect air bubbles and large solid particulates ...
XY-TEK
Volumetric flow rate: 0 l/min - 80 l/min
Process temperature: 0 °C - 60 °C
Precision: 2 %
... The CPD Clamp-on Flow Sensor / Flow Meter Overview
The CPD series clamp-on ultrasonic
flow sensors are compact, non-invasive
flow
meters ...
XY-TEK
Volumetric flow rate: max 300.0 l/s
Process temperature: 0 °C - 40 °C
Process pressure: 0 bar - 20 bar
... AQ FLOW SENSOR – Precise. Robust. Truly Real-Time. The AQ FLOW SENSOR is a patented insertion flowmeter, offering a smart alternative to ultrasonic and inductive devices. It enables real-time flow measurement ...
Volumetric flow rate: max 300.0 l/s
Process temperature: 0 °C - 40 °C
Process pressure: 0 bar - 20 bar
... Hydrant Flow Sensor – True-Born Underground Integration The AQ IoT Hydrant Flow Sensor is a patented, in-house innovation designed for true-born underground hydrant integration. It offers a simple and cost-effective ...
Volumetric flow rate: 1.4 l/min - 2,500 l/min
Process temperature: 0 °C - 150 °C
Process pressure: 0 bar - 350 bar
... measurement possible with forwards and reverse flow ● For cost-sensitive applications ● Simple to use ● Cable outlet infinitely rotatable Characteristics The VHS flow transmitter measures the flow ...
Volumetric flow rate: 2 l/min - 600 l/min
Process temperature: -20 °C - 90 °C
Process pressure: 0 bar - 100 bar
... analog display ● Monitor and display ● Simple adjustment by means of drag indicator ● Insensitive to dirt ● Short installation length Characteristics The volume flow raises a disc unit (fitted with a magnet) ...
Volumetric flow rate: 0.1 m³/h - 2,700 m³/h
Process temperature: 0 °C - 120 °C
Process pressure: 250 bar
... proportional to the volumetric flow rate. The effects of increasing viscosity reduce the linear flow range and shifts the k-factor. Further, the effect of viscosity depends on the frequency (RPM of rotors). Therefore, ...
KOBOLD Messring GmbH
Process temperature: 0 °F - 302 °F
Process pressure: 0 psi - 232 psi
... M5000 is a battery-powered electromagnetic flow meter with a very high accuracy even at very low flows. The excellent repeatability as well as the above-average battery life makes this innovative water ...
Badger Meter
Mass flow rate: 0 kg/min - 200 kg/min
Process temperature: -196 °C - 400 °C
Process pressure: 0 bar - 882 bar
... The RHM 15 is an all-purpose meter suitable for liquid processing plants. A wide application flow range capability allows for commonality of installation across numerous lines – a real benefit to owners and operators. Materials: ...
Rheonik Messtechnik GmbH
Volumetric flow rate: 0.1 l/min - 30 l/min
Process temperature: -20 °C - 90 °C
Process pressure: 16 bar
... for this magnetic flow meter are diverse: Can be used in areas where flow sensors with moving parts (paddle wheel, turbine sensors) cannot be applied due to contaminated media Sensor is intended for ...
Mass Flow ONLINE BV
Volumetric flow rate: 0 m³/h - 33,629 m³/h
Process temperature: -200 °C - 350 °C
... U-shaped dual sensors maximize accuracy Flow rate turndown up to 200:1 Suitable for liquids and gases Sensor sizes from <1mm through 10” Ability to measure rates from 0-0.032 GPH to 0-423,000 BPD Flow ...
Process pressure: 0.6 mbar - 4 mbar
Precision: 0.2 %
... Robust housing Excellent flow mesurement accuracy, can measure duplex flow, electromagnetic debimeter with 4-20mA and other outputs General Features Excellent small flow mesurement accuracy, ...
Volumetric flow rate: 0.5 l/h - 550 l/h
Process temperature: -20 °C - 120 °C
Process pressure: 34, 15 bar
... The Micropulse range of positive displacement flowmeters offer a high level of accuracy and repeatability. These precision meters can be used for flowrate measurement, in flow monitoring control applications ...
Filton Process Control Engineering
Process temperature: 50 °C
... High performance fixed installation Area Velocity flowmeter with extended features for open channel, part-filled pipe and river application. Dimensions: 166x161 x103 mm; Wall mounting ABS enclosure; Protection class: IP 65 (NEMA 4); Operating ...
Sensotec Instruments
Volumetric flow rate: 0.2 l/min - 250 l/min
Process temperature: -20 °C - 160 °C
Process pressure: 300, 200 bar
... Flow monitor for liquids wide switch range sturdy construction high operating pressure installation in any orientation Operation: The flow monitors type DUM operate with the ...
Meister Strömungstechnik GmbH
Volumetric flow rate: 0 m³/h - 212,100 m³/h
Process pressure: 0 Pa - 5,000 Pa
... The electronic PREMASREG® 716x pressure sensor and switch is equipped with measuring functions for volume flow, differential pressure, filter monitoring and liquid level detection based on pressure measurement in clean air. The devices ...
Volumetric flow rate: 909 m³/h - 1,195 m³/h
Process temperature: -30 °C - 80 °C
Process pressure: 0 bar - 40 bar
... Flow meters for compressed air as well as various technical gases Reduce your energy costs and increase your sustainability with the VA 521. Monitor the consumption of each machine and analyze your leakage flows ...
Process temperature: -10 °C - 50 °C
... following inputs: flow sensors (VA, FA, TA); Pt100; 4-20 mA; 0-10 V. A 12 V supply is available for sensors in 3-wire system. Mains or battery operation. DISPLAYED INDICATORS actual flow velocity ...
Höntzsch GmbH & Co KG
Process temperature: 60, 20 °C
... Transmitting Flowmeter has been designed to meet demanding applications where corrosion problems arise at relatively high pressures and a local display and a transmitted signal are required. The F5000, whilst having a range of standard ...
Mass flow rate: 10 g/h - 27,000 g/h
Process temperature: 0 °C - 65 °C
Process pressure: 10 psi - 200 psi
... measurement and control of very low flow rates of liquid or gas with the new series of Quantim® QMC Coriolis flow meters and controllers from Brooks Instrument. This third-generation Quantim® QMC Coriolis ...
Brooks Instrument
Process temperature: -25 °C - 250 °C
Process pressure: 1 MPa - 4 MPa
Precision: 0.5, 1 %
... by convertor, you can see the instantaneous flow, cumulative flow, output pulse, analog current and other signals for the measurement and control of fluid flow. It is suitable for the conductive medium ...
Shanghai Zhaohui Pressure Apparatus Co.,Ltd.(ZHYQ)
Volumetric flow rate: 12 l/min - 250 l/min
Process temperature: -20 °C - 90 °C
Process pressure: 16 bar
... form a Kármán vortex street in the flow. The distance between the individual vortices is constant. The frequency at which the vortices flow past a sensor depends on the flow velocity and is proportional ...
SIKA
Process temperature: -40 °C - 60 °C
... The 2150 Flow Module uses continuous wave Doppler technology to measure mean velocity. The sensor transmits a continuous ultrasonic wave, then measures the frequency shift of returned echoes reflected by air bubbles or ...
Teledyne Isco
Volumetric flow rate: 0.1 m³/h - 9.5 m³/h
Process temperature: -20 °C - 130 °C
Process pressure: 0 bar - 64 bar
... The RIF100 is an electromagnetic flow meter that utilizes Faraday's principle to measure the velocity of the liquid and convert it into a signal proportional to the flow. Among its advantages are good ...
Riels Instruments
... diagnostic functions support users and provide guidance for setting up a flow measurement with best possible accuracy. Pipe size: 0.08 m … 3 m Pipe wall thickness 1 mm … 60 mm Flow velocity: ± 0 … 20 m/s bi-directional Maintenance-free ...
Process pressure: 10, 16, 40 bar
... Introduction The FLODEM electromagnetic flow meter are based on decades of practical experiences. They are highly reliable, easy to operate and very suitable for harsh conditions. Features： - Easy to install, various ...
SMAAT TECHNIQUES SAS
Volumetric flow rate: 0.1 m³/h - 110,000 m³/h
Process temperature: -40 °C - 150 °C
Precision: 0.5 %
... ; 20 ÷ 36 Vac/Vdc; 11 ÷ 13Vdc Reverse Flow - Instant measure and totalization of reverse flow Flow Cutoff - Adjustable. Below selected value, instantaneous flow and outputs ...
SGM LEKTRA
Volumetric flow rate: 0.1 m³/h - 50,667.6 m³/h
Process temperature: -40 °C - 60 °C
Process pressure: 6 bar - 100 bar
... Field MFE600E Electromagnetic Flowmeter is based on MicroSensor's professional electromagnetic flowmeter production equipment line. All flowmeter products use a water tower up to 37m as a pressure ...
Micro Sensor Co.,Ltd
Volumetric flow rate: 2.5 m³/h - 6,500 m³/h
Process temperature: -20 °C - 150 °C
Process pressure: 16 bar
... turbine flow meter manufacturer, we supply a liquid turbine flow meter to measure the volume mass of a gas or liquid to improve the precision, accuracy, and resolution ...
Feejoy Technology
Process temperature: -40 °C - 160 °C
Precision: 1, 1.5, 0.5, 0.2 %
... transit-time ultrasonic flowmeter with clamp-on sensors for non-invasive liquid measurement. Based on microprocessor and programmable flow measurement techniques the process flow can be accurately measured ...
ALIA GROUP INC
the best suppliers