Volumetric flow rate: 1.6 m³/h - 80 m³/h
Process temperature: -10 °C - 60 °C
Process pressure: 0 Pa - 200,000 Pa
... of ultrasonic flow meters for fuel gas! It realizes a wide range of measuring ability that includes microflows using the characteristics of ultrasonic waves. It is resistant to dust so there is no need to install filters. ...
Aichi Tokei Denki Co.,Ltd
Process temperature: 80, 120 °C
Process pressure: 30, 20 bar
Precision: 5 %
... The variable area flow meter K Smart represents a new generation of flow meters for industrial flow measurement and monitoring of air and other gas flows. ...
Kytola Instruments Oy
Process temperature: 40 °C
Process pressure: 20 bar
Precision: 0.1 %
... The Emi3 instantaneous flowmeter is the world reference equipment for the characterization of automotive injectors.The EMI3 is a device for measuring the volume injected. It also offers measurement of the opening and closing delay for ...
Process temperature: -40 °C - 85 °C
... The Radar Flow Velocity Transmitter is connected directly via RS485 communication interface, providing simple, reliable, cost-saving process data with remote monitoring, calibration, configuration and diagnostics capabilities. Housing ...
Process temperature: -20 °C - 60 °C
Precision: 0.4, 0.2 %
... electromagnetic flowmeter is completely autonomous with advanced functionality. Its benefits are flexible installation, high-precision volume measurement, and worldwide transmission of measured data via Modbus RTU protocol. MAGB2 flowmeter ...
Arkon Flow Systems
Process temperature: -23 °C - 60 °C
Volumetric flow rate: 0 m³/h - 40 m³/h
Process temperature: -20 °C - 150 °C
Process pressure: 6.3 MPa - 25 MPa
... INTERFACE (OPTION) Turbine Flow Meter - liquid applicationsINDUMARTCanada www.indumart.com Indumart FTT20 series of Liquid Turbine Flow Transmitters are accurate instruments for measuring ...
Indumart
Process temperature: -200 °C - 300 °C
Process pressure: 250 bar
Precision: 0.1, 0.2, 0.5 %
... Once there is flow passing through the pipes, Coriolis force will give rise to deflection (phase shift) on the vibration of two pipes and the deflection of vibration is directly proportional to the mass flow of fluid. ...
Shanghai Yinuo Instrument Co., Ltd
Process temperature: -40 °C - 350 °C
Process pressure: 1.6 MPa - 4 MPa
Precision: 1, 1.5 %
... series Vortex Flow Meter can be used to detect and measure the flow of all kinds of gas, fluid and steam. 1% accuracy stainless steel steam gas liquid fluid vortex flow meter,China ...
Process temperature: 1,000 °C
Process pressure: 100 mbar
... Dedicated to travers points volumetric flow rate measurement in industrial stacks compliant to European Standard EN 16911-1, to ISO 10780 and to USEPA 40CFR part 60, method 2 Professional solution with: Compatible for all pitot ...
Volumetric flow rate: 20 l/h - 640,000 l/h
Process temperature: 0 °C - 120 °C
Process pressure: 0.1 bar - 11 bar
... Magnetic-inductive flow meter VOLUMTEC Construction according to hygienic design standards, all Measurement in both flow directions Adjustability of the illuminated LC-Display Self-monitoring and, ...
Volumetric flow rate: 3 us gal/h - 12,000 us gal/h
Process temperature: 2 °C - 66 °C
Process pressure: 300 psi
... The Flow & Temperatrure CT series has the following characteristics and/or options: No moving parts to clog or wear Solid state relay can be configured as alarm or pulse out Gallons or Liters For coolant, water, water/glycol mix ...
UNIVERSAL FLOW MONITORS
... Magnetic Flow Meter The third most common flow meter is the magnetic flow meter more commonly just called a mag meter. The physical ...
Flowtech Measuring Instruments Pvt. Ltd.
Process temperature: -70 °C - 380 °C
Precision: 1 %
... interface of the large graphical display is easy to use even by inexperienced users. With the new quick setup option, your flow measurement can be set up in less than a minute. Online help-texts make the use of the printed manual unnecessary ...
systec Controls
Volumetric flow rate: 0 l/min - 50 l/min
Process temperature: 5 °C - 55 °C
Precision: 2 %
... indicates the flow rate. KOFLOC provides flow meters with a valve that can perform both measurement and control of the flow rate, flow meters with an ...
KOFLOC Corp.
Process temperature: -40 °C - 70 °C
... MULTIPHASE FLOW METERING Flowatch 3I The Pietro Fiorentini Multiphase and Wet Gas Flow Meters are non intrusive, inline systems providing real time measurement of oil, water and gas flow ...
PIETRO FIORENTINI
Volumetric flow rate: 1 m³/h - 4 m³/h
Process temperature: 50 °C
Process pressure: 0.3 bar - 16 bar
... starting flow and is permitted for all installation positions. The meter is equipped with an 8-digit glass/copper register (IP68) and a modulator disc. This enables electronic, non-reactive scanning and is the basis ...
Process temperature: -40 °C - 350 °C
... away from the flow meter when the meter location is in poor access areas or in higher temperature applications. When the alarm is triggered the display flashes until the alarm setpoint hysteresis has ...
Metri Measurements
Volumetric flow rate: 0.1, 0.2, 1 l/s
Process temperature: 0 °C - 50 °C
Process pressure: 7 bar
... The ultrasonic flowmeter in beverage dispensing systems for alcoholic and nonalcoholic drinks. The contact-free flow measurement with no moving parts is wear and maintenance free. The free pipe cross-section over the ...
MIB GmbH Messtechnik & Industrieberatung
Process temperature: 5 °C - 55 °C
Process pressure: 16 bar
... water consumption; ● Shell protection: three-level waterproof sealing measures, protection level up to IP68; ● Metrological performance: realizing positive and negative measurement, instantaneous flow; ● Power supply: ...
Shandong Hetong Information Technology Co.,Ltd.
Process temperature: -20 °C - 60 °C
Process pressure: 0 MPa - 26 MPa
Repeatibility: 0.1 %
... conditions into account. It has effectively solved the influence on the metering precision caused by flow distortions( such as turbulent flow, swirl flow, pulsing flow etc). CL-1-4S ...
Jiangsu Flowna Intelligent Technology Co. Ltd
Process temperature: 4 °C - 57 °C
Process pressure: 0 bar - 10 bar
Precision: 2 %
... The Q-Eye PSC area velocity flow meter is designed for stationary flow monitoring of slightly to heavily polluted media in full or partially full pipes or open channels. It uses advanced Pulse-Coherent ...
GWF
Volumetric flow rate: 6 m³/h - 6,500 m³/h
... series gas turbine flowmeter adopts double display structure: the working condition volume is displayed on mechanical wheel and without power supply; the standard condition volume is displayed on LCD. ITZ series gas turbine flowmeter ...
Volumetric flow rate: 0.1 l/min - 100 l/min
Process temperature: 0 °C - 65 °C
Process pressure: 10 bar
... Flow rate control and monitoring for oil circulation lubrication systems The SKF Flowline Monitor is used to divide, measure and control the flow rate in oil circulation lubrication systems. Three different flow ...
Volumetric flow rate: 0.1 l/min - 40 l/min
Process temperature: 0 °C - 70 °C
Process pressure: 16 bar
... circulation systems SKF Variolub SMD flow meters are designed to meter and monitor the flow in oil circulation lubrication systems. They are offered in three different versions covering ...
Volumetric flow rate: 0 l/min - 56 l/min
Process temperature: 0 °C - 70 °C
Process pressure: 15 bar
... use in oil circulation systems SKF Safeflow flow meters control and indicate the flow rate. Each flow meter can be calibrated individually according to oil viscosity ...
Volumetric flow rate: 0 l/min - 2,000 l/min
Process temperature: 0 °C - 50 °C
Process pressure: 0 bar - 10 bar
... The range of Metal Work FLUX Series Flowmeters gets expanded with the introduction of the new sizes 1 and 2 having flow rates, respectively, of up to 2,000 Nl / min and of up to 4,000 Nl / min. The main body is made ...
Volumetric flow rate: 0 l/min - 4,000 l/min
Process temperature: 0 °C - 50 °C
Process pressure: 0 bar - 10 bar
... The range of Metal Work FLUX Series Flowmeters gets expanded with the introduction of the new sizes 1 and 2 having flow rates, respectively, of up to 2,000 Nl / min and of up to 4,000 Nl / min. The main body is made ...
Process temperature: -10 °C - 90 °C
... Inline Sensor with Integrated Processor Compact inline flow sensor Calorimetric principle Monitoring of flow rate Monitoring of the medium temperature For water/glycol mix ...
... li>
Characteristics / technical specifications
- Independent, maintenance-free sensor system for continuous grease condition monitoring
- IP67 protection against dust and water
- Multiple interfaces
Process temperature: 0 °C - 80 °C
Process pressure: 16 bar
... Overview
M10 is an electromagnetic
flow
meter grooved sensor covering diameters from DN50 to DN150. It provides compact dimensions and light weight to enable precise and repeatable measurement of low and
high ...
BERMAD CS Ltd
Volumetric flow rate: 16 l/h - 150,000 l/h
Process temperature: -40 °C - 120 °C
Process pressure: 1.6 MPa - 42 MPa
... maintenance, so it is widely used in complex, harsh environment in various industries to measure and control small flow with low flow rate and all kinds of harsh medium conditions. Features Modular design, easy ...
Process temperature: -30 °C - 160 °C
... from each other. To carry out flow measurements with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe ...
PCE Deutschland GmbH
Process temperature: -30 °C - 160 °C
... The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, the volume ...
PCE Deutschland GmbH
Process temperature: -40 °C - 60 °C
... cut them open. This enables the flow meter to be installed even during operation. Another special feature of the flow meter are the different outputs. It is possible to get the flow ...
PCE Deutschland GmbH
Process temperature: -20 °C - 480 °C
Process pressure: -10,000 Pa - 10,000 Pa
... flue duct. This flowmeter adopts the non-contact measurement method, which can effectively solve the measurement difficulties such as unstable flow field and uneven flow velocity distribution in the ...
Cubic Instruments (Wuhan) Ltd.
... respectively. The gas flow rate in the flue is calculated through the time difference of ultrasonic wave transmission, and the volume flow rate of the flue gas is calculated according to the cross-sectional area of the ...
Cubic Instruments (Wuhan) Ltd.
Volumetric flow rate: 3 m³/h - 3,200 m³/h
Process temperature: -10 °C - 40 °C
Process pressure: 0 Pa - 200,000 Pa
... Introduction BF-3000 Ultrasonic Biogas Flowmeter can be commonly used with various industrial gas streams(biogas, natural gas, air, etc.), but with special design to enable it withstand the wet and corrosive gas conditions in biogas ...
Cubic Instruments (Wuhan) Ltd.
Volumetric flow rate: 0.1 m³/h - 2,000 m³/h
Process temperature: 0 °C - 70 °C
Process pressure: 10 bar - 40 bar
... Body material Steel epoxy coated Internal coating Ebonite (sauf DN<125 en PTFE) Connection Brides PN10/16/25/40 ...
Volumetric flow rate: 0.1 m³/h - 110,000 m³/h
Process temperature: -40 °C - 150 °C
Precision: 0.2 %
... The electromagnetic flow meter offered by Tecnopenta Srl is the ideal tool for precise and reliable flow measurement of conductive liquids, even chemically aggressive ones, in industrial and process environments. Thanks ...
Volumetric flow rate: 0.2 m³/h - 95,560 m³/h
Process pressure: 1.6, 1, 0.6 MPa
... SMT) are implemented to improve the reliability. Electromagnetic flow meter technical parameters Display: reaches 8element liquid crystal display, current clock to indicate flow data. Two kinds ...
Mass flow rate: 400 kg/h - 10,000 kg/h
Process temperature: -20 °C - 55 °C
Tank truck management system for use in Alll environment (e.g. diesel). With single volume counter. For pulse generator specification "Namur". Backlight LCD display. Pre-tested by the German weights and measures authorities.
HORN GmbH & Co. KG TECALEMIT
... Ultrasonic Flow Sensor [Features] ● Measurement: Flow rate ● Measuring range: Flow rate: 0~±30m/s; Temperature (for heat meter function): Standard: -30~90℃; High temp. -30~160℃ ● ...
Volumetric flow rate: 10 l/min - 100 l/min
Process temperature: -40 °C - 80 °C
Precision: 0.5 %
... Series 1" DIGITAL FLOW METER are suitable for flows between 6 - 120 L/min (1.59 - 31.70 GPM), providing highly accurate flow measurement performance. The MX Series offers ±±0.5% accuracy ...
Volumetric flow rate: 40 m³/h - 313 m³/h
Process temperature: 0 °C - 50 °C
Process pressure: 16, 10 bar
... STANDARDS OF MANUFACTURE EN 1092-2 DRILLING FLANGES MATERIALS BODY CAST IRON EN 1561 (OPT. EN GJS-400-15 EN 1563) CORROSION PROTECTION COATED INSIDE-OUTSIDE FIG.650 (FBE) EPOXY 300 MICRONS RAL 5005 FIG.650IRR (FBE) EPOXY 200 MICRONS RAL 7016 CERTIFIATES D.M. ...
Volumetric flow rate: 0.6 m³/h - 6 m³/h
Process temperature: -40 °C - 60 °C
Process pressure: 9.8 bar
... vibration during installation. At the same time, the flowmeter also has a small size and easy installation. This product is suitable for 10L / min flow rate or more models. when less than 10L / min flow ...
the best suppliers