- Power Transmission - Mechanical components >
- Actuator and Positioning System >
- DC actuator >
- SKF Linear & Actuation Technology
SKF Linear & Actuation Technology DC actuators
Stroke : 13 mm
Force: 30 N
Speed: 3 mm/s
M-Thrust series precision actuators offer backlash-free motion of the shaft up to 25 mm travel range. Precision motion is accomplished by a miniature DC servo with rotary encoder or stepper motor providing ...
IntelLiDrives, Inc.
Stroke : 8 mm
Force: 30 N
Speed: 3 mm/s
M-Thrust series precision actuators offer backlash-free motion of the shaft up to 25 mm travel range. Precision motion is accomplished by a miniature DC servo with rotary encoder or stepper motor providing ...
IntelLiDrives, Inc.
Stroke : 10 mm
Force: 70 N
Speed: 4 mm/s
M-Thrust series precision actuators offer backlash-free motion of the shaft up to 25 mm travel range. Precision motion is accomplished by a miniature DC servo with rotary encoder or stepper motor providing ...
IntelLiDrives, Inc.
Stroke : 10 mm
Force: 200 N
Speed: 0 m/s - 1 m/s
The AQUARIUS ST is the new generation of ETEL’s short stroke actuators primarily dedicated to “Test & Scan” turret handler applications. Compared to its predecessor the AQUARIUS one, the ST series allows a higher force ...
Stroke : 10 mm
Force: 12.1 N - 68.4 N
Speed: 0 m/s - 1 m/s
The TUCANA ST is the new generation of ETEL’s short stroke actuators primarily dedicated to “Test & Scan” turret handler applications. Compared to its predecessor the TUCANA one, the ST series allows a higher force control ...
Torque: 1.3 Nm
Motor power: 400 W
... well-known principles of physics.This actuator, very contained in size, is suitable for welding small size pieces, where the use of conventional systems is inconvenient because of size and elevated costs. The brushless ...
Stroke : 50 mm - 300 mm
Force: 1,600, 2,100 N
Speed: 20, 2.7, 40, 5 m/s
Actuator with Encoder: Actuator with Encoder, with 50 to 300 mm stroke, 2.7 to 40 mm/sec speed and load up to 1200 Nm, according to the supplied voltage which may be 12 o 24 V. It is suitable for all ...
OSLV ITALIA
Stroke : 50 mm - 300 mm
Force: 1,600, 2,100 N
Torque: 1,200 Nm
Actuator without Encoder: Actuator without Encoder with 50 to 300 mm stroke, 2.7 to 40 mm/sec speed and load up to 1200 Nm, according to the supplied voltage which may be 12 o 24 V. It is suitable ...
OSLV ITALIA
Stroke : 50 mm - 300 mm
Force: 2,100, 1,600 N
Torque: 1,200 Nm
Microwin with Encoder: Microwin with Encoder with 50 to 300 mm stroke, 2.7 to 40 mm/sec speed and load up to 1200 Nm, according to the supplied voltage which may be 12 o 24 V . Thanks to its telescopic worm screw, it is suitable for ...
OSLV ITALIA
Stroke : 50 mm - 1,500 mm
Force: 2.5 kN - 213.7 kN
Speed: 292 mm/s - 2,167 mm/s
... movement, and are equipped with an anti-rotation device. They are ISO 15552 compatible. They can be powered using Stepper or Brushless motors, also with closed-ring control. Motor power may be direct or delayed.
automationware
Torque: 0.6 Nm - 34 Nm
Rotation angle: 0.1 ° - 1.5 °
Speed: 3.14 m/s - 52.36 m/s
The new ultra-flat, ultra-light brushless actuators combine our high-precision/high-performance reducers with a compact, high-output brushless DC motor. FLA actuators ...
Stroke : 30, 10 mm
Repeatability: 0.5 µm
LAH linear actuators are available in two models, LAH-46 for DC motors and LAH-80 for stepper motors. A precision ball screw provides positioning accuracy better than 4 microns and repeatability of 1 micron.
Stroke : 10, 30 mm
Force: 49 N
Speed: 0.9 mm/s
A precision ball screw provides positioning accuracy better than 2 microns and repeatability of 0.1 microns. This product is ideal for measuring instruments, test and inspection systems, optical equipment, semiconductor and LCD manufacturing ...
Force: 1,000 N - 3,700 N
Speed: 0.01 m/s - 0.04 m/s
Motor drive for through going spindle 4778 Powerful 24 V DC motor with worm gear, designed for non-rotating through going spindle for pushing and pulling movements. A cable with AMP plug and an integrated Hall ...
Motor drive for through going spindle 4779 Powerful 24 V DC motor with worm gear, designed for an axis parallel through going spindle. Ideal for integration in a lift column. The drive is only ...
Stroke : 25.4 mm - 300 mm
Force: 150 N - 1,000 N
Speed: 5.5, 7.5, 12.3, 23.5, 36.5 mm/s
Linear actuators for direct current with dynamic force up to 1000N. These actuators include a range with supply voltages between 12-24V and can, depending on the type, ...
Transmotec Sweden AB
Torque: 0.18 Nm
... linear actuator. It has a unique permanent magnet DC motor (PMDC) design. It is available in size of 2.5 inches or 6.4 cm. The simple, yet powerful, linear actuator provides a torque ...
Torque: 10 Nm - 32 Nm
Output speed: 4 -180 rpm The Limit and Torque Stop Used for three phase AC motors, single-phase Handwheel for manual operation External conditions: High cabinet seal protection level Different temperature will be used Options: Middle ...
Stroke : 2 in - 7.8 in
Torque: 50 ft.lb - 900 ft.lb
Ambient temperature: -13 °C - 122 °C
... explosion-proof (EdF type) DC (Eg type) Magnetek offers the Ed type of 60 Hz actuator in 208VAC, 230/460VAC and 575VAC three phase versions. Other voltages from 110VAC to 690VAC, 50 Hz versions, explosion ...
Force: 15 N - 40 N
Torque: 0.8, 3 Nm
Ambient temperature: 0 °C - 40 °C
PSD 40 direct drive is a mechatronic system with integrated control, bus interface and absolute measurement system without battery. This drive is ideal for automatic format changeover. The stepper motor with integrated control and bus ...
halstrup-walcher GmbH
Stroke : 6 mm
Ambient temperature: -5 °C - 40 °C
Bi-directional actuators with mobile coil (Voice Coil technology) The movement force and direction depend on the current injected into the coil and its direction. Use Guidance Power 7 Power supply Direct ...
Stroke : 100 mm - 1,000 mm
Force: 306, 220, 1,008, 110 N
Speed: 0 m/s - 500 m/s
The Rack and Pinion System L Series- AZ Series Equipped is a linear actuator in which a rack and pinion mechanism with a motor have been combined. The motor is equipped with the AZ Series that utilizes a battery-free ...
ORIENTAL MOTOR
Stroke : 1 in - 18 in
Bore: 2, 3, 1.5 in
Ambient temperature: -20 °F - 160 °F
... 75 lbs., 2"/up to 150 lbs., 3"/up to 350 lbs. • Non-rotating rod is standard with Original Line Electric® Actuator • Choose no motor, AC or DC stepper motors • Motor, encoder, and driver available ...
Stroke : 50 mm - 1,000 mm
Bore: 25, 16, 40, 32 mm
Motor power: 38, 100, 50, 22 W
The original LEFS slider features an inline motor with a cover. Because the motor drives the ballscrew directly, additional cost of a belt and pulley system is avoided. The motor cover is taller than the load platform, so be aware of ...
SMC Corporation of America
Stroke : 72.3 mm
Rod diameter: 10 mm
Force: 352.2 N
... freedom to use LSA(External Linear Actuator), LA (Non-Captive Linear Actuator), LGA(Captive Linear Actuator) of different form factors to exactly fit in the application. NEMA23(57mm) ...
Changzhou Fulling Motor Co., Ltd
Stroke : 52, 26, 13, 77 mm
Force: 1 N - 125 N
Torque: 0.01 Nm
... encoder driver in the connector for safe signal transfer over distances up to 10 m. Motor variants • Position-controlled DC motors with a gearhead and high-resolution rotary encoders allow for incremental motion of ...
Physik Instrumente
Stroke : 25, 12 mm
Force: 50 N
Speed: 0.3, 0.1 m/s
... -rotating tip, servo / DC motor with encoder •Hall-effect or mechanical limit switches CHARACTERISTICS •travel range 12 / 25 mm •non-rotating tip •Hall-effect or mechanical limit switches •2-phase geared step ...
Stroke : 1,000 mm
Force: 0.6 kN - 350 kN
Speed: 1.4 mm/s - 140 mm/s
... Lubrication with synthetic grease (gearbox long life lubricated, screw drive regreasable). ATL Series acme screw drive linear actuators: 11 standard sizes available Acme screw from Ø 13,5 mm to Ø 120 mm Linear ...
SERVOMECH
Stroke : 6 in - 48 in
Force: 133 N - 556 N
Torque: 1.69, 3.73, 1.36 Nm
Our entry level actuator has been reimagined and redesigned with the end user's time and ease in mind. Featuring an elegant and simplified single piece base extrusion that allows for both easy and flexible mounting as ...
Rod diameter: 35 mm
Force: 1,500, 800 N
Speed: 10, 6, 13 mm/s
Just 35mm body diameter. Up to 1.500N. Smooth design ideal for in-view applications Duty cycle S3 10% based on 10 min. • Encoder • Increased IP • Customizable stroke and retracted length
Schumo AG
Stroke : 400 mm
Force: 1,000, 3,000 N
Speed: 0 mm/s - 42 mm/s
... profile ensures stability and reliability for all JLDQ.14B movements. The versatile single drive features maintenance-free 24 V DC motors.
DewertOkin GmbH - OKIN Brand
Stroke : 100 mm - 600 mm
Force: 3, 5, 7.5 kN
Motor power: 170, 40 W
The RACO COMPACT electric actuators realizes a high adjustment force with a simple, robust design. As with the heavy duty electric actuators, the principle is purely ...
RACO
Force: 4,000, 6,000 N
Motor power: 120 W
Speed: 7 m/s - 9 m/s
More strong Quieter Duty Cycle Low cost Long lasting STANDARD FEATURES Mounting Dimensions: Stroke + 171 mm Motor: 24V DC Current: 5A Limit switch: Signal Type Duty Cycle: 10% (1/9) Body Color: Gray RAL 7035 Guide ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining