Spraying Systems nozzles

Orifice diameter: 1 in
Flow: 25 l/min - 250 l/min
Pressure: 6 bar

... that any debris is flushed from the nozzle to avoid pattern disruptions or flow reductions. All the models include a pressure eliminator for ease of flow settings at different pressures. Stream Pattern: The nozzle ...

Orifice diameter: 0.5 in
Flow: 25 l/min - 950 l/min
Pressure: 6 bar

... conditions. The FLUSH mode is used to ensure that any debris is flus- hed from the nozzle to avoid pattern disrup- tions or flow reductions. Stream Pattern: The nozzle stream is adjusted by rotating ...

Orifice diameter: 2, 1, 1.5, 2.5 in
Flow: 19 l/min - 1,000 l/min
Pressure: 6 bar

... for a quality fog pattern. Foam: The VIPER® SG nozzle can be used as an aspirating foam nozzle with the addition of inline eductors and foam tubes. Inlet Options: The VIPER® SG selectable flow nozzles ...

Orifice diameter: 0.8, 1.2, 1.5, 1.8 mm
Flow: 95 l/min - 375 l/min
Pressure: 4, 6, 8 bar

... or 70 mm. It is ideal for robotised cleaning operations in production, where a single-axis movement of the nozzle is sufficient. The nozzle can be coupled to an ionisation system to remove electrostatic charges.

Flow: 70, 110, 190 l/min
Pressure: 2, 3, 1 bar
Media temperature: 0 °C - 50 °C

Rotary Nozzle with AC Static Eliminator for Dust Removal and Ionisation • Wide area covarage by rotating the nozzle with high speed • Tungsten pins for extreme high lifetime • Cleaning areas by using ...

Flow: 100 l/min - 110 l/min
Pressure: 4 bar
Media temperature: 0 °C - 50 °C

Rotary Nozzle with AC Static Eliminator for Dust Removal and Ionisation • Wide area covarage by rotating the nozzle with high speed • Tungsten pins for extreme high lifetime • Cleaning areas by using ...

Flow: 215, 290, 375 l/min
Pressure: 4, 6, 8 bar
Media temperature: 0 °C - 50 °C

Rotary Nozzle with AC Static Eliminator for Dust Removal and Ionisation • Wide area covarage by rotating the nozzle with high speed • Tungsten pins for extreme high lifetime • Cleaning areas by using ...

Spray nozzles Eductor nozzle Misting nozzles Washing - cleaning nozzles

The liquid is sprayed when coming into contact with the vibrating surface. The ultrasonic nozzle produces droplets or particles of mastered size: the higher the ultrasonic frequency, the smaller the aerosol particles ...

The ultrasounic technology produces an acoustic wind phenomenon in front of the probe without gas displacement: the focusing of the acoustic waves produced by the probe creates a pressure field at a few centimeters distance. This pressure ...

Orifice diameter: 0.2 mm - 1.6 mm

Low Flow Rate Fine Fog Nozzles/ Flat Spray BIMV series Features • Flat spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 100 μm or less (*3). • Features large turn-down ...

Lance Nozzle, good for complete evaporation in cooling tower, large volume is also effective for dust suppression. Features • Pneumatic spray nozzle producing fine atomization with a mean droplet ...

Orifice diameter: 0.2 mm - 5.8 mm

Standard Flat Spray Nozzles - One-piece Structure with Ceramic Tip Even Spray Distribution Features • Flat spray pattern with uniform distribution throughout pattern area. • Even spray impact across ...

Concentric tube nozzles for air/oil lubricated systems, mainly for MQL etc.

WS single nozzle can accurately spray to the lubrication point position to achieve precise lubrication.

WD dual nozzles, the center distance of the dual nozzles is 7, 9, 11mm, whichWD dual nozzles, the center distance of the dual nozzles is 7, 9, 11mm, which can be accurately ...

Orifice diameter: 10 mm - 200 mm
Pressure: 6 bar

cleanBLOW – ion blower nozzles/ cleaning nozzles Our cleanBLOW product group includes the Eltex combiCLEAN and varioCLEAN rotary nozzles. The basic body R36E is available in straight ...

Orifice diameter: 10 mm - 500 mm
Pressure: 1 bar - 6 bar

flatBLOW – Ion blower nozzles for almost any application In our product group flatBLOW you can find all Eltex flat blower nozzles. From narrow to wide to angled nozzles, everything ...

Orifice diameter: 10 mm - 150 mm
Pressure: 1 bar - 6 bar

roundBLOW – Ion blower nozzles for almost any application In our product group roundBLOW you can find all Eltex round blower nozzles. From the cannula to the diameter Ø 19mm. The basic body R36E is ...

Orifice diameter: 0.5 mm - 3.5 mm
Flow: 50 l/min - 5,000 l/min
Pressure: 40 bar - 350 bar

... loss through the nozzle. - Smaller and lighter compact design which is more durable, easy to clean and can be rapidly stripped down and reassembled. - No wrenches or tools are required to install the nozzle. - ...

... required. Large flow passages greatly reduce clogging. CONSTRUCTION AND MATERIALS Three part construction: Nozzle body - Brass or 303 Stainless Steel. Thread sizes:3/4"-20 UNEF on No. 30615 and 11/8"-18 ...

... atomising series spray nozzles offer the user a wide variety of spray patterns, flow rates and atomisation. Unlike hydraulic or pressurized nozzles where the energy from the pressure of the liquid is ...

Screwed single nozzles IHR nozzles differ in 4 categories: . Single standards . Individual Eco-Line . Individual mini- molds . Multi-tip Thanks to the different solutions, iHR Solution is ...

The screwed single nozzles IHR nozzles differ in 4 categories: . Single standards . Individual Eco-Line . Individual mini- molds . Multi-tip Thanks to the different solutions, iHR Solution ...

The screwed single nozzles IHR nozzles differ in 4 categories: . Single standards . Individual Eco-Line . Individual mini- molds . Multi-tip Thanks to the different solutions, iHR Solution ...

Orifice diameter: 4, 8, 15 mm

... internationally patented Variacor® system enables you to assemble spraying systems quickly and easily as well as adjusting nozzle positions efficiently. Economy: You don't waste time calling a piping specialist or ...

INDUSTRIAL SPRAY NOZZLES - CLEANING IN PLACE SPRAY CHARACTERISTICS Produces a solid cone type spray pattern from a multiple orifice body. Relatively uniform distribution at all pressure, 360° coverage. Atomization ...

... or valve required.  Large flow passages greatly reduce clogging. CONSTRUCTION AND MATERIALS  Three part construction:  Nozzle body - Brass or 303 Stainless Steel. Thread sizes:3/4”-20 UNEF on No. 30615 and 11/8”-18 ...

Off center flat spray nozzles BN Off center nozzle with wide throw characteristic for area spraying without spray boom as well as for border application and banding.

Rotating cleaning nozzles, „CanCleaner“ and „MiniWhirly“, ball bearing-mounted Rotating cleaning head with flat spray nozzles and ball bearings.

Orifice diameter: 0.4 mm - 2.5 mm

Version with magnetic valve. Fine flat fan atomization with the aid of air or gas. Liquid pressure principle. External mixing of fluids. Applications: Web dampening, cooling, humidification of goods, atomization of viscous liquids.

Orifice diameter: 5 mm
Flow: 2,000 l/min - 3,000 l/min
Pressure: 10 bar

... Pneumatic hose inner dia. Operating voltage 230 VAC Volt Alternating Current - Wechselstrom Available nozzle lengths (mm) 60 / 80 / 100 Nozzle lengths upon request (mm) 120 / 150 / 200 / 250

Orifice diameter: 0.4, 0.6, 0.8, 1 mm

Cold runner system valve gate nozzle Melt channel diameter 4.8 mm One cooling circuit supplies up to four nozzles. The following parts are included in the scope of delivery: - Plug-in cooling ...

Orifice diameter: 4.8 mm
Media temperature: 0 °C - 45 °C

Hot runner nozzle Open single nozzle with thick-film heating element (BlueFlow®) Operating voltage 230 VAC Volt Alternating Current - Wechselstrom Heating element tubular Nozzle ...

LSD Thread The A_LSD rotating heads are built in AISI 316 stainless steel, and are mounted on double ball bearing, to have a correct rotation in any mounting position. The rotating part has the peculiarity of not having coupling lines ...

LSD clip/weld The LSD rotating heads are built in AISI 316 L stainless steel, and are mounted on double ball bearing, to have a correct rotation in any mounting position. The rotating part has the peculiarity of not having coupling ...

Building: The A_LSE48 rotating heads are built in AISI 316 stainless steel, and are mounted on double ball bearing, to have a correct rotation in any mounting position. Their reduced diameter allows the use, in the case where there are ...

Orifice diameter: 12, 16, 25 mm

... selection of brushes, nozzles, hoses and air guns, which means you save both time and achieve flexibility when you need to remove dirt and dust in the ventilation ducts with compressed air. Tornado nozzles ...

Orifice diameter: 25 mm

... 1 inch (25mm) compressed air nozzle equipped with a very powerful rotating WhipStream. The WhipStream rotates with 10,000-12,000rpm and the impact of the compressed airflow is very impressive - up to 1m from the nozzle. The ...

Orifice diameter: 4 mm

Multi-directional nozzles Dual direction Multi-directional double balls Extended ball socket, dual direction adjustment For CNC lathes and centres with high-pressure pumps

Orifice diameter: 15 mm

Product Description welding nozzle A10.5 for 15mm sheets

Product Description welding nozzle A3.5 for 5mm sheets

Product Description welding nozzle A5.6 for 8mm sheets

Orifice diameter: 4 mm - 8 mm

Thread Mount Type The Coolant Spray Nozzle could easily adjust its direction and spray precisely. BA90102020001A Thread Mount: PT 1/8 L: 20 L1: 10 D1: 6 D2: 5 d: 4 H: 17 BA90102020002A Thread Mount: PT ...

Orifice diameter: 3 mm - 4.4 mm

The Coolant Spray Nozzle could easily adjust its direction and spray precisely. When the coolants correspond with three pressures-low, medium and high pressures, it can precisely aim at workpiece. They are suitable for ...

Leak Lock Type (Alloy Steel) Special design for avoiding oil leaking. Not delaying spraying fluid which prolongs the longevity of the tool holders. SPECIFICATIONS BA90104020001A Thread Mount: PT 1/8 L: 40 L1: 10 L2: 18 D1: 6 D2: ...

Available as threaded or non-threaded and come in many different shapes and sizes for...

Orifice diameter: 0.25 in - 0.38 in
Flow: 2.3 m³/h - 5.7 m³/h
Pressure: 1, 0.2 bar

The DD 106 discharge nozzles in the neXt® product family are designed to fit existing ball heads of 1/4" Ariana articulated hoses. This means that you may, for instance, extend your existing articulated hose system ...

Orifice diameter: 0.25 in
Flow: 2.3 m³/h - 5.7 m³/h
Pressure: 0.5 bar - 2.5 bar

The DD 206 and DD 206 (A) discharging nozzles are flow-optimised. A greater electrostatic discharge reach and cleaning effect on the material to be discharged may be achieved with the additional support of compressed ...

Flow: 3.7 m³/h - 9.45 m³/h
Pressure: 0.2 bar - 2.5 bar
Media temperature: 5 °C - 80 °C

Discharging Nozzles, Antistatic, The DD 306 and DD 306 A discharging nozzles in the neXt® product family are flow-optimised. Due to their short design, they are, among others, used in areas requiring ...

As an alternative to BL industrial atomisers with pump and control unit, Mantis also offers hand-held spraying units, which are ideal for flexible use on smaller surfaces and are extremely portable. Since 2014, it has been possible ...

As an alternative to BL industrial atomisers with pump and control unit, Mantis also offers hand-held spraying units, which are ideal for flexible use on smaller surfaces and are extremely portable. Since 2014, it has been possible ...

As an alternative to BL industrial atomisers with pump and control unit, Mantis also offers hand-held spraying units, which are ideal for flexible use on smaller surfaces and are extremely portable. Since 2014, it has been possible ...

Nozzle nr 3 Material thickness 10-25 mm Gas consumption OX: 2150nl/h, AC: 520nl/h

Media temperature: 450, 350, 320 °C

Heating nozzles for injection machines and molds, hot melt application, similar spray gun, especially in cases where they are available for mounting in limited areas DESCRIPTION: • Power dissipation: up to 5.5 W / ...

Media temperature: 350, 450 °C

Electrical resistance brass injection nozzle, injection nozzles. Nozzle band heater brass tube Diameter = 30mm Height = 22mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm Cable ...