- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Nozzle >
- Spraying Systems
Spraying Systems nozzles
The Triple Click Nozzle that was developed by Dosanova replaces the traditional foam, rinse and desinfection nozzle. Just by turning the head 120° the operator can easily switch between the 3 nozzles ...
Dosanova bvba
The Triple Click Nozzle that was developed by Dosanova replaces the traditional foam, rinse and desinfection nozzle. Just by turning the head 120° the operator can easily switch between the 3 nozzles ...
Dosanova bvba
FOAM/RINSE/DISINFECTION NOZZLE Stainless steel nozzles with ST3100 Nipple
Dosanova bvba
Orifice diameter: 0.5 in - 1 in
Flow: 80 l/min
Pressure: 3 bar
Nozzle made of polypropylene Housing and internal parts made of polypropylene, valve seat and O-rings made of FKM or EPDM, spring of hastelloy 2.4610, rotatable hose connection. Viscosity: 800 mPas*
Dr. Jessberger GmbH
Orifice diameter: 0.5 in - 1 in
Flow: 80 l/min
Pressure: 3 bar
Housing and internal parts made of polypropylene, valve seat and O-rings made of FKM or EPDM, spring of Hastelloy 2.4610, rotatable hose connections.
Dr. Jessberger GmbH
Orifice diameter: 1, 0.75 in
Flow: 100 l/min
Pressure: 2 bar
Housing and internal parts made of white polypropylene, valve seat and O-rings made of NBR, spring made of stainless steel.
Dr. Jessberger GmbH
Low Velocity Spray Increases Accuracy and Reduces Waste Unlike conventional spray nozzles that rely on high velocity pressure to shear a fluid into small drops, the ultrasonic atomizer uses vibrational energy to generate ...
Orifice diameter: 0.2 mm - 2 mm
Single orifice capillary nozzles (Wrench size 11 [mm]) nozzle insert made of stainless steel nozzle nut (Wrench size 11 [mm]) made of Brass
Blasberg GmbH
Orifice diameter: 0.2 mm - 2 mm
Nozzle for Zero Cavity Nozzle made of stainless steel Nozzle body made of brass and coated
Blasberg GmbH
Orifice diameter: 0.25 mm - 1.5 mm
Stainless steel nozzles with 7 air orifices right twisting Stainless steel nozzles 7 air orifices right twisting Non Wide
Blasberg GmbH
... of wear-resistant tempered steel with one forward jet and blind plug (interchangeable) included, the General is a perfect nozzle for preventative maintenance and all-around sewer cleaning. Two different water jet angles ...
INTERSEWER UG (haftungsbeschränkt)
... effectively the blowing of toilets. Technical Specifications: Optimized Hydro Mechanics Replaceable, threaded stainless steel nozzle inserts Water jet angle 36° ¾" – 1 ¼" hose connection (with bushings available in Accessories)
INTERSEWER UG (haftungsbeschränkt)
The Black Blaster is an exceptional nozzle and a great alternative to a stainless steel nozzle. This nozzle offers high cleaning efficiency. Advantages: Relatively inexpensive Can be ...
INTERSEWER UG (haftungsbeschränkt)
Orifice diameter: 0.38 in - 1 in
Piton fixed irrigation suitable for irrigation and direct stream cleanups
Orifice diameter: 0.38 in - 1 in
Lanza adjustable suitable for irrigation and watering with deferentesd angulosde jet cleaning.
Orifice diameter: 6 mm
Unit - Each - Long description - Metric L standpipe T 90 - Specifications - Easy mounting without the need for a press - Benefits - Can be used for fast on-site repairs - Shape - Straight - 2 connection sides - Connection ...
The new PVDF material for Food Contact (EC10/2011, EC1935/2004, FDA) is the latest innovation in the WindJet® range. The embedded metal particles offer a huge safety advantage over other plastic materials. Even very small pieces of this ...
Spraying Systems Co.
Pressure: 0 bar - 1,800 bar
Media temperature: 0 °C - 400 °C
The single nozzle easyFILL is an economical alternative to the sprue. As a direct extension of the machine nozzle in the injection mould, it takes over the plastic melt via the hardened sprue bush. This ...
Meusburger Georg GmbH & Co KG
Flow: 1.6 l/h - 3.4 l/h
Pressure: 3 bar - 14 bar
Media temperature: 5 °C - 10 °C
This plastic misting nozzle is equipped with a non blocking filter inside that makes the nozzle a longer life, and it is anti-drop designed so that the nozzle will not drip when the pressure ...
DaYu Water-saving Group Co.,Ltd.
... • Heater and Thermocouple, Nozzle body and Nozzle Tip can easily be replaced • Multi-purpose applications, suitable for small cavity centre distances • Twist prevention at the ...
HASCO
... a material's height are detected and the nozzle automatically makes the required height adjustments, maintaining the necessary nozzle standoff to avoid collision with warped surfaces and protecting the ...
OMAX
Flow: 42 l/min - 103 l/min
Pressure: 4 bar - 10 bar
Media temperature: 95 °C
The Cyclone is a liquid driven Orbital Cleaner that can be used for mobile or stationary applications. The round jet nozzles rotate around two axes simultaneously and produce focused high impact jets generating a highly ...
GEA Breconcherry
Orifice diameter: 3 mm - 18 mm
Pressure: 2,000 bar
... whole length of the nozzle. The even heating of all nozzles guarantees a high process reliability and an excellent system balance. Easy maintenance and replacement Front installation for easy ...
EWIKON Heißkanalsysteme GmbH
Flow: 0 m³/s - 0.02 m³/s
Pressure: 3 bar - 12 bar
Media temperature: 0 °C - 140 °C
Alfa Laval’s range of Rotary Jet Head tank-cleaning devices provide exceptional cleanability, better end-product quality, greater overall output and up to 70% reduction in operating costs. They are designed for hygienic applications, ...
Micron-S Precision Dispensing Tips Micron-S Precision Dispensing Tips are designed for high accuracy micro-dot dispensing. Micron-S tips have a Luer lock thread and can be used with ...
Flow: 1.5 us gal/h - 7.4 us gal/h
Pressure: 40, 10, 30, 20, 60 psi
... Pneumatic Spray Nozzles DESIGN FEATURES Deflected flat fan spray pattern HOW SPRAY PATTERN IS ACHIEVED In a pressure-fed system, the liquid is supplied under pressure to either internal or external mix BETE ...
BETE
*Suitable for processing almost all standard thermoplastics *Large selection of nozzles designs for a wide array of applications
Otto Männer GmbH
... and high mechanical strength The new nozzle screwed into the system base for a single point of injection. Suitable also for polymers where the molding cycle phase is reduced. An Oerlikon HRSflow single nozzle ...
... Reduces porosity and eliminates costly sprue cone Decreases tool costs Traditional cold plug nozzles can be replaced by the hotcast sprue nozzle Increased design options with new mold design ...
Orifice diameter: 15 mm
... Blanket End nozzle or a Through Type. The Through Type nozzle ensures that the HT cable can be moved through so that more than a single nozzle is able to be installed in the series on ...
Meech International
Orifice diameter: 0.22 mm - 2 mm
Complete nozzle made of stainless steel Low abrasion due to polished holes Robust against external influences Short channel minimizes thread pulling Bores from mm to mm Size and order number easy to read for repeat orders
UES AG
Orifice diameter: 15, 20, 13, 26, 30 mm
Pressure: 2,000 bar
Heat conductive tips with metallic or screw-type connections Suitable for all types of plastic Additional thermal separation between nozzle heating pipe and body for optimal isolation from mould Up ...
Heitec Heisskanaltechnik
Orifice diameter: 0.04 in - 0.14 in
... control the size and location of paste alloy deposits, Fusion offers a wide range of applicator gun nozzles. Machined from high- grade stainless steel, the nozzles attach quickly to all manual or automatic ...
Orifice diameter: 6 mm
The SI FN050 is an antistatic air nozzle with a flat design, meaning it is particularly suitable for use in difficult to reach places, and for wide surfaces. Air aiding of the antistatic nozzle is attained ...
Swedex GmbH Industrieprodukte
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining