Trimod'Besta level switches

Process temperature: -40 °C - 150 °C
Process pressure: -1 bar - 40 bar

VIBRATION LEVEL SWITCH - LIQUID FORK The compact and robust solution for safe level monitoring for all types of liquids. Versatile, extensive configuration options, corrosion-resistant ...

Process temperature: -40 °C - 1,100 °C
Process pressure: 0.9 bar - 10 bar

ROTONIVO® - PROVEN ALLROUNDER FOR POINT LEVEL MEASUREMENT The Rotonivo® rotary paddle level switch from UWT operates reliably and maintenance-free and offers a compatible solution ...

Process temperature: -40 °C - 80 °C
Process pressure: 0 bar - 0.8 bar

ROTONIVO® - PROVEN ALLROEUNDER FOR POINT LEVEL MEASUREMENT The Rotonivo® rotary paddle level switch from UWT operates reliably and maintenance-free and offers a compatible solution ...

Process temperature: -50 °C - 250 °C
Process pressure: -1 bar - 16 bar

Vibration level switch for solid applications* Point level detection of powders and fine-grained bulk solids * Probe length: 220 mm / 8.7" * Density: <8 g/l / <0.49 lb/ft3 * -50…+250°C ...

Process temperature: -196 °C - 450 °C
Process pressure: -1 bar - 160 bar

... OPTISWITCH 4000 is a vibration level switch for simple liquid applications. It is a universal and cost-effective device for level detection in small vessels. It detects low or high level ...

Process temperature: -40 °C - 115 °C
Process pressure: -1 bar - 100 bar

capacitance level switch OPTISWITCH 6700 The OPTISWITCH 6700 is a capacitance level switch for hygienic and general industrial applications requiring ...

Process temperature: -40 °C - 150 °C
Process pressure: -1 bar - 64 bar

The VEGASWING 53 is used as a universal level switch in liquids with small dimensions. Independent of the mounting position, it detects reliably with millimetre accuracy the limit level. ...

Process temperature: -40 °C - 115 °C
Process pressure: -1 bar - 25 bar

The VEGAPOINT 31 is a capacitive level sensor for level detection of fine-grained and powdery bulk solids. Typical applications are overfill and dry run protection. The small sensor can also be used in ...

Process temperature: -40 °C - 115 °C
Process pressure: -1 bar - 25 bar

The VEGAPOINT 21 is a capacitive level sensor for level detection of water-based liquids. Typical applications are overfill and dry run protection. The small sensor can also be used in thin pipelines. • ...

Process temperature: -20 °C - 50 °C

... echo processing algorithms to identify the sludge interface level using state-of-the-art technology only found in this unit. Why Measure Sludge Level? Sludge blanket level control ...

Process temperature: -196 °C - 350 °C
Process pressure: 0 bar - 40 bar

... potentialfree. Float switches are also available with multiple switch points. The switching functions always refer to a rising liquid level: Normally open, normally closed or change-over ...

Process temperature: -30 °C - 150 °C

Applications: - Level measurement of liquids in machine building - Control and monitoring tasks for hydraulic power packs, compressors and cooling systems Special features - Maximum reliability thanks to high-quality ...

Process temperature: -269 °C - 400 °C

... made using a separate model OSA-S switching amplifier Description The model OLS optoelectronic level switch is used for the detection of limit levels in liquids. This is widely ...

... Series Mechanical Level Switches are the most rugged and durable liquid point-level detection products in the industrial marketplace today. ABB's LS Series Mechanical Level ...

Process temperature: -40 °C - 150 °C
Process pressure: 103, 345 bar

ABB's MS10 Level Switch is the most rugged and durable liquid buoyancy point-level switch product in the industrial marketplace today. The MS10 is a ...

The LMS200 electric switch is a magnetically actuated double pole double throw switch. When the LMS200 is mounted on a KM26 magnetic liquid level indicator, LS series cage level ...

Level switch Medium: oil Max. number of switching points Level: 3 Material pipe: brass Material float: PUR

Level switch Medium: oil Max. number of switching points Level: 3 Material pipe: brass / stainless steel Material float: stainless steel

Level switch Medium: Oil, Ester, Glycole Max. number of switching points Level: 2 Material pipe: Cu Material float: PUR/ stainless steel

Process temperature: 0 °C - 300 °C
Process pressure: 25 bar

... aluminium Flange square 92 x 92 mm, 92 mm PCD Switch element Microswitch SPDT with silver contacts Switch rating 250 VAC, 5 A / 30 VDC, 5 A Overall length (tank) 226 mm Safety ...

Process temperature: 0 °C - 250 °C
Process pressure: 0 bar - 250 bar

... mechanism. Bellow material Perbunan Safety Integrity Level (SIL) SIL 1 (Type AA 01 051: SIL 2) Approvals ABS, BV, ClassNK, DNV-GL, LR, RINA, RMRS Bellow material Silicon Safety ...

Process temperature: -30 °C - 80 °C
Process pressure: 25 bar

... 92 x 92 mm, PCD 92 mm Switch element - Microswitch SPDT with silver contacts Switch rating - 250 VAC, 5 A/30 VDC, 5 A Length of encapsulated cable - 3 m, or as required Cable type - Neoprene (H07 ...

Process temperature: -40 °C - 150 °C
Process pressure: 0 bar - 64 bar

Vibrating level switch for liquids For liquids (density: > 0.5 ... 2.5 g/cm³) Application area It detects the limit level reliably and with millimetre accuracy directly at the ...

Process temperature: -40 °C - 150 °C
Process pressure: 0 bar - 64 bar

... liquid level switch with smallest dimensions. Independent of the mounting position, it detects the limit level reliably and with millimetre accuracy. The device can be used for full or ...

Process temperature: -50 °C - 250 °C
Process pressure: 0 bar - 64 bar

Vibrating level switch for liquids For liquids (density: > 0.5 ... 2.5 g/cm³) – compact version Application area It detects the limit level reliably and with millimetre accuracy ...

Process temperature: -10 °C - 80 °C
Process pressure: 10 bar

... resistance - 1010 Ohm Switch type - SPST – SPDT Max. fluid viscosity - 150 cSt Fluid specific gravity - ≥ 0.7 kg/dm³ Electrical connection - DIN43650 – PG09 Flange material - Anodized aluminium Stem material - AISI304 Switch ...

Process temperature: -10 °C - 80 °C
Process pressure: 0 bar - 10 bar

Level Switches with Stop Ring Actuation point - LM1 – 1 actuation point NC/NO contact / LM2 – 1 actuation point SPDT contact / LMM1 – 2 actuation points/floats NC/NO contacts Electrical connection - Lead wires L. ...

Process temperature: -10 °C - 80 °C
Process pressure: 0 bar - 10 bar

ctuation point - LM1 – 1 actuation point contact NC/NO / LM2 – 1 actuation point contact SPDT / LMM1 – 2 actuation points NC/NO Mounting - GIA – Flange Ø 92 / GTIA – Thread G2” Switching capacity - LM1/LMM1 – 60W/VA / LM2 – 30W/VA Current ...

Process temperature: -20 °C - 100 °C
Process pressure: 0 bar - 10 bar

... its travel, meets the built-in Reed switch at the pre-established point, the contact, stimulated by the magnet housed in the float, opens or closes, thus having the possibility of remotely sending a luminous, acoustic ...

Process temperature: -20 °C - 120 °C
Process pressure: 0 bar - 10 bar

Electromagnetic level indicators to one or two contacts 1/2" Bsp threaded Connection SPST or SPDT Contacts USE: Made to ensure, with maximum safety, the minimum or minimum and maximum levels of liquids ...

Process temperature: -20 °C - 120 °C
Process pressure: 0 bar - 10 bar

Electromagnetic level indicators to one or two contacts 3/4" Bsp threaded Connection SPST or SPDT Contacts USE: Made to ensure, with maximum safety, the minimum or maximum level of liquids in tanks ...

Process temperature: -25 °C - 75 °C

Capacitive filling level monitor / filling level switch for the reliable monitoring of the maximum or minimum filling level of fluids or bulk materials With ...

Process temperature: -25 °C - 120 °C
Process pressure: 16 bar

Capacitive filling level monitor for top installation with stable stainless steel shaft and PTFE tip for adhesive media With chemical-resistant PTFE tip Robust stainless steel housing For use in medium ...

Process temperature: -25 °C - 70 °C
Process pressure: 16 bar

Optical filling level monitor with resistant glass tip for the reliable monitoring of the maximum or minimum filling level of fluids Detects fluids with a very low DK values, such as oil Resistant ...

Process temperature: -40 °C - 85 °C

push-pull output small dimensions additional reference electrode 3 m wire length Liquid sensor type DRS-303 is designed for conducted liquid presence detection. Parameters of the detector have been fixed to allow ...

Just by mounting the switch on a pipe, the surface of the liquid can be easily detected. Description The HPQ-T is designed specifically for liquid level detection by non-contact methods in clear or ...

Process temperature: -25 °C - 70 °C
Process pressure: -49,000 Pa - 490,000 Pa

... light beam. This Fail-safe detection is available by using two different sensing methods for the upper and lower limits on the level of liquid in a tank. Description Unlike all known competitive models, the HPF-T032(E) ...

All-resin structure ensures no metal contamination. The HPF-D027 and -D033 are both made out of PFA tubing with no metal parts, even on the inside. Features Problems due to liquid accumulation are reduced by Azbil Corporation's ...

Process temperature: -10 °C - 60 °C

... electrode via the liquid. The relay outputs switch. The sensitivity is adjustable. 2 voltage-free relay contacts are provided for switching functions. Switching functions: Level switch: The ...

Process temperature: -10 °C - 60 °C

Specially designed for applications in the food industry Detection of interface layers between liquids with different levels of conductivity (product, foam) Adjustable delay helps to avoid ...

Process temperature: 300 °C

... mining Application For level detection of conductive and non-conductive liquids in tanks, ducts, pipes or silos. Particularly suitable for application in the food, pharmaceutical and chemical industries. Also ideal ...

Process temperature: -20 °C - 79 °C
Process pressure: 10 bar

... vertical float switch range which has been designed to give the user a long reach float switch with a number of switching options, to cater for a wide variety of system requirements. Manufactured in ...

Process temperature: -20 °C - 105 °C

... Mounting of this series requires access to the inside of the tank. These devices are particularly suitable for detecting low levels of liquids in the bottom of tanks and containers, and for lower SG liquids. Typical ...

Process temperature: -10 °C - 85 °C

The RSF166 float switch series is designed to offer a number of switching options to meet a variety of system requirements. These are manufactured in PPS (Polyphenylene Sulphide), which is compatible with a wide range ...

Process temperature: 0 °C - 50 °C

is a float switch that turns up and down using the weight as the fulcrum. It is designed to be the smallest possible size. It is available in two types; contact "a" (normally-open contact) and contact "b" (normally-close ...

Process temperature: 0 °C - 50 °C

is a float switch that turns up and down using the weight as the fulcrum. It can detect cut-in and cutout water levels with single float. The "Snap on-off" action ensures stable operations in clean water, ...

Process temperature: 0 °C - 50 °C

is a heavy-duty type float switch with a shock absorber. Having equipped with a high grade micro switch, the MC-2 assures trouble-free operation in the liquid containing much suspended solids and floating ...

Process temperature: -45 °C - 204 °C
Process pressure: 19 bar - 70 bar

... Reflectometry (TDR)-based, 24 VDC level detectors designed to accurately measure the various layers in interface level measurement applications. Encompassing a number of significant engineering accomplishments, ...

Process temperature: -40 °C - 121 °C
Process pressure: 55, 103 bar

... ultrasonic level switches utilize ultrasonic contact technology for measuring level in clean liquid applications. These integrally mounted level switches offer either a 8-amp DPDT gold ...

Process temperature: -40 °C - 85 °C
Process pressure: 138 bar

Echotel® Model 940 and 941 Ultrasonic Level Switches are compact integral units that utilize pulsed signal technology to perform high or low level measurement in a wide variety of liquid applications. ...