- Hydraulics - Pneumatics >
- Valve >
- Hydraulic valve >
- Voith Turbo
Voith Turbo hydraulic valves
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
PRESSURE REDUCING VALVE The valve reduces high upstream pressure to a pre-set lower and constant downstream pressure level, regardless of fluctuating flow or varying upstream pressure. A hydraulic ...
Tecnidro
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
PRESSURE SUSTAINING VALVE The valve maintains downstream pressure over a pre-set minimum value, regardless of fluctuating flow or varying upstream pressure. Otherwise the valve may ...
Tecnidro
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
ALTITUDE CONTROL VALVE This valve controls water level in high level reservoirs to avoid overflow, without any external control system like float control etc. The valve remains completely ...
Tecnidro
DN: 40 mm - 250 mm
Pressure: 17.2 bar
... state. If at set state, water from the valve’s upstream passed through the actuator and maintained the deluge valve close, then now the actuator drains the deluge valve’s control chamber. ...
Raphael Valves Industries (1975) Ltd
Pressure: 250 psi
... ensures high flowrates with minimum head loss * The valve trips open automatically upon a gradual release of water pressure from its control chamber. The valve is actuated by a Wet Pilot Line’s hydraulic ...
Raphael Valves Industries (1975) Ltd
DN: 25 mm - 150 mm
Pressure: 10 bar
Temperature: 70 °C
The RAF 7R flow rate control valve is line pressure hydraulically actuated, 3-W plastic pilot. Normally the valve is partly open to allow constante flow rate. The head loss across the orifice is proportional ...
Raphael Valves Industries (1975) Ltd
DN: 15 mm - 200 mm
Pressure: 16 bar - 420 bar
Metal-sealed Floating Ball Valve body material: Carbon steel /Stainless steel / Alloy steel /Special ( Monel /Inconel /Hastelly etc.) end connection: RF/RTJ/BW/SW/Thread operation: product overview:Athena metal-seated ...
DN: 50 mm - 1,000 mm
Pressure: 16 bar - 420 bar
... complete the control valve construction. These control valves are designed according to the modular assembly principle, can be equipped with athena GROUP actuators and valve accessories ...
... ] orifice diameter, internal pilot type chemical 2-3 port valve that does not transmit heat to fluid. Up to two air-operated valves can be controlled simultaneously by a single solenoid valve. ...
DN: 6.35 mm
Pressure: 0 psi - 150 psi
DN: 50 mm - 800 mm
Pressure: 10 bar - 50 bar
Temperature: -40 °C - 400 °C
... eccentric butterfly valve Elara is available in forged or cast executions and different body, disc and seat materials. Application fields cover power generation, district cooling and heating as well as chemical processes ...
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...
Di Nicola Infinam Srl
DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C
... be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above mentioned technical advantages there is a remarkable economical benefit as this valve ...
Di Nicola Infinam Srl
DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar
... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve ...
Di Nicola Infinam Srl
Pressure: 400 bar
Solenoid valve 4/2 is designed to control the lubrication supply in two-wire systems. This valve is capable of using MAX NLGI 2 grease with a maximum pressure of 400 bar (5880 psi). When the main circuit ...
Pressure: 262 bar
Pneumatically actuated discharge valve for use in systems such as HANDY-H single-line hydraulic barrel pumps or pneumatic pumps. Supply air pressureMax:8 bar Lubrication pressure 241bar Hydraulic ...
Pressure: 262 MPa
Hydraulically actuated discharge valve for use in systems such as the HANDY-H single-line hydraulic barrel pump. Product main features: Input hydraulic pressure Max: 103 bar Hydraulic ...
DN: 0.5, 1, 2 in
Pressure: 24, 17.2 bar
Temperature: 121 °C
ThermOmegaTech’s thermostatic mixing valves/diverting valves use a thermal actuator to accurately proportion and maintain flow in response to temperature. These 3-way thermostatic valves ...
DN: 25 mm - 300 mm
Dueker gate valves – for water and gas.Sophisticated technology. Fully-fledged gate valves. Dueker service connection valves are essentially the same as gate valves ...
Düker GmbH
DN: 0.375 in
Pressure: 200 bar
Flow rate: 20 l/min
... KD is an accurately regulating flow restrictor with an integrated non-return valve. It is made of stainless steel W.St.1.4301 and designed for both oil and water hydraulics. Suited for in-line installation. FR1-06-KD ...
Pressure: 0 bar - 350 bar
Flow rate: 0 l/min - 50 l/min
... pilot operated pressure control valve with electric proportional control and mounting interface in compliance with ISO 4401 (CETOP RP 121H) standards. — It is suitable to modulate the pressure in hydraulic ...
Duplomatic Oleodinamica
DN: 65 mm - 300 mm
Pressure: 0 mbar - 1,600 mbar
Temperature: -15 °C - 60 °C
VMH Safety shut off valves, slow opening and fast closing with hydraulic or pneumatic actuator The VMH type valve is a safety shut off valve for gaseous media operated ...
... 600° C to 1000° C. Series GD… valves are available with exposed spindle, gear actuated with electrical or hydraulic motors. Series GDH... valves are available with ratchet handle lockable ...
Planning, construction and delivery of high quality valves for power plant and process heat generation.
DN: 50 mm - 3,000 mm
Pressure: 10 bar - 100 bar
Pressure / flow control valves. Main features : ■ significant reduction in turbulence, vibration and noise ■ fine regulation of the entire range of flow, made possible by the customized trim ■ high precision in ...
F. Nencini Srl
DN: 250 mm - 3,400 mm
Pressure: 10 bar - 100 bar
... the flow is controlled by the movement of the sleeve of the valve against the fixed cone. The fixed cone valve discharges the raw water of dams to free air, chamber or underwater level. This valve ...
F. Nencini Srl
DN: 100 mm - 2,200 mm
Pressure: 10 bar - 64 bar
... and then into the downstream channel. Nencini also designs and engineers the stilling well related to the valve. Applications ■ hydraulic power plants ■ turbine by-pass ■ controlled discharges.
F. Nencini Srl
DN: 6 in - 84 in
The M&J Valve Model M-303 is an advanced design slab gate valve for high pressure differential applications in the oil & gas sector. It is designed to simplify installation and upgrades, improve safety ...
DN: 40 mm - 70 mm
Pressure: 6, 16 bar
Temperature: -20 °C - 80 °C
... bracket. The light weight aluminium material in combination with our well known butterfly valve design is a very attractive solution for a modern hydraulic system. Download the data sheet or contact ...
DN: 0.5 in - 12 in
Pressure: 175 psi
Temperature: 121 °C
... Bell & Gossett, assures optimum system flow balance at minimum pump operating horsepower. Valves can simply be pre-set using the B&G Circuit Setter Balance Valve Calculator, curve booklet G10091, or the ...
DN: 13 mm
Pressure: 350 bar
... body ball valves designed for use as on/off devices for hydraulic applications with standard and extended SAE mating flange connectors according to ISO 6162-1, 6162-2 and SAE J 518 C. Ball Valve ...
STAUFF
DN: 0.25 in - 2 in
Pressure: 255 bar
Temperature: -20 °C - 250 °C
2 pièces bail valve 1500lbs forged carbon Steel with full bore for Chemical and Pharmaceutical industries, petrochemical industries, hydraulic installation, heating and compressed air. For fluids at ...
SFERACO
DN: 0.25 in
Pressure: 1,000 psi - 5,000 psi
Flow rate: 5 us gal/min
Valves are adjustable: 1,000 to 5,000 psi Features Pressure reducing valves are designed to reduce the maximum pressure in a portion of a hydraulic circuit: the valve ...
Flow rate: 55 l/min - 600 l/min
The valves for the GMV power units are packed with technology meant to last over time and offering unparalleled reliability. Hundreds of thousands of elevator systems running with our products are an unequivocal proof ...
RUPTURE VALVE TYPE B – TYPE G – TYPE R; OVERFLOW VALVES TYPE G – TYPE R IN COMPLIANCE WITH THE STANDARD 2014/33/UE The rupture valves type 3006 interrupt the downward travel of the ...
DN: 2 in - 84 in
The M&J Valve Model M-303 is an advanced design slab gate valve for high pressure differential applications in the oil & gas sector. It is designed to simplify installation and upgrades, improve safety ...
The M&J Expanding Gate Valve is a round body cast steel valve with a thru conduit in the open position and is normally manufactured in class 600 & higher. The M&J Compact Expanding Gate Valve ...
DN: 0.75 in
Pressure: 250 bar
Temperature: -54 °C - 204 °C
... orifice, flow restrictor hydraulic valve. Operation The NV08-P0 allows the orifice to change from fully closed to fully open with counterclockwise adjustment rotation. Feature Adjustment ...
Hydrabase
DN: 0.875 in
Pressure: 0 bar - 250 bar
Temperature: -54 °C - 204 °C
... variable orifice, flow restrictor hydraulic valve. The NV10-P0 allows the orifice to change from fully closed to fully open with counterclockwise adjustment rotation. Feature Adjustment cannot ...
Hydrabase
DN: 0.875 in
Pressure: 350 bar
Temperature: -54 °C - 204 °C
... variable orifice, flow restrictor hydraulic valve. The NV18-P0 allows the orifice to change from fully closed to fully open with counterclockwise adjustment rotation. Feature Adjustment cannot ...
Hydrabase
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining