{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Speed: 450 mm/s
... quality control. Markets • General Industrial Assembly • In-Plant Automotive Fdraulics and pneumatics • Quality control – Positioning with real-time monitoring of the force-position curve• Excellent throughput ...
... Positioning locator with interpolated electric actuators with ball bushings and brushless servo motors, all controlled by a digital driver system to provide the geometric alignments. • Compact design: the MLGA can be ...
Stroke: 1,000 mm
Speed: 0.3 m/s
... linear module as option of vertical axis • Inline and right-angle gear boxes with customised motor adapter The positioning systems of our CTU series were specially developed for the automotive industry. They are ...
Load: 0.9 kg - 2.5 kg
Stroke: 17 mm
... hexapod as well as the pivot point and several reference coordinate systems into account. Application fields Industry and research, test systems, e.g., for image stabilization in cameras or mobile ...
... portal robots for up to three dimensional movements. Lexium MAX axes can provide a solution to applications requiring the positioning of heavy loads over a long stroke with a high dynamic response. It is designed for a broad range ...
... Customized Flat Panel Display solutions Our solution for the demanding FPD industry covers processes from AOI to array tester over photo spacer measurements. More than 800 systems are installed worldwide. ...
SCHNEEBERGER AG Linear Technology
Repeatability: 0.003 mm - 0.1 mm
Load: 3,000 g - 180,000 g
Stroke: 50 mm - 1,500 mm
... motion systems. Main products include ball screw linear modules, belt-driven linear guide rails, electric actuators, positioning stages and motion controllers for Cartesian ...
FUYU Technology
... XYZ Stage Multi-axis Positioning Table Linear Gantry System Cartesian Robot Technical Feature FSL40 linear guide is aluminum profile, body width 40mm, high stability,compact ...
FUYU Technology
... Screw: G1610 Ball Screw Drive linear Positioning Tables linear Positioning Tables consist of Linear Guideway unit and ballscrew unit. For saving space, FUYU product ...
FUYU Technology
... three-axis systems are bendable units for positioning in the X, Y and Z directions. They consist of a HIWIN double axis HD in the X-direction, a HIWIN belt axis HT-B in the Y-direction and a cantilever axis HC in the ...
Load: 5 kg - 130 kg
... HIWIN two-axis systems HS2 are bendable units for positioning in the X and Y directions. A HIWIN double axis HD forms the basis in the X-axis. In the Y direction, either a HIWIN belt axes HM-B (module) or HT-B (table) ...
Load: 16, 30, 8, 2 kg
... Linear axes and axis systems are used in many ranges of industry to transport or position components. HIWIN offers linear axes with toothed belt drive for applications with high dynamics and speed. Thanks to HIWIN's modular system, ...
... This positioning system is made up of wood with a portable folding lid. It has a tough casing that comes with various heights. The system has a dimensional height of tp2 and width of tp1 to IT 5. Other ...
... Users of positioning systems appreciate individual complete solutions. As they are put into operation und are ready for production quickly - and thus save time and money. For this purpose, IEF-Werner has developed ...
... Multi-axis modular system – Implementing gantry systems quickly and simply The modular system from RK Rose+Krieger can be used to construct linear, planar and three-dimensional gantries in a short ...
Repeatability: 50 nm
Stroke: 31, 6 mm
... direction of 6 mm. On top of the TRIPOD 52-Core a SR-3211 rotation stage allows an unlimited rotation around the Z axis. The TRIPOD 52-Core is fully compatible with the CLS-52 modular system and is placed on a XY platform ...
SmarAct GmbH
Repeatability: 50 nm
Stroke: 31, 6 mm
... The larger of the two TRIPOD 92-6DoF motion system has six degrees of freedom and uses SMARSLIDE high-precision piezo stages, being also fully compatible with the CLS-92 modular system. The central component of the ...
SmarAct GmbH
Stroke: 14, 200 mm
... electromagnetic direct drives. The TRIPOD 400-Core is based on three MLS-92122 stages enabling Z, Rx and Ry motions. Two MLL-400 and one MR-9222 positioner complete the system providing degrees of freedom in X, Y and ...
SmarAct GmbH
Repeatability: 5 µm
Load: 30 kg
Stroke: 300 mm
... Open-frame XY stages designed with a low profile for a wide range of automated accurate positioning in microscope-based applications. The drive mechanism located on the side of the unit and offers a clear unobstruced ...
IntelLiDrives, Inc.
Repeatability: 1 µm
Load: 30 kg
Stroke: 300 mm
... Open-frame XY stages designed with a low profile for a wide range of automated accurate positioning in microscope-based applications. The drive mechanism located on the side of the unit and offers a clear un-obstructed ...
IntelLiDrives, Inc.
... Vertical XY gantry system with motorized belt actuators designed for automated accurate positioning applications. Actuator : BEMA-60 (X,Y) Stroke X x Y : 1,500x1,5000 mm Pitch : 90mm/motor rev Motor mounts : ...
IntelLiDrives, Inc.
Repeatability: 1.5 µm
Load: 80 kg
Stroke: 365 mm
... Characteristics Up to 6 degrees of freedom Built-in vacuum supply and customer signal cables at chuck level Here are the key features Nanometer position stability Ensures precise positioning accuracy over ...
ETEL S.A.
Repeatability: 1 µm
Load: 30 kg
Stroke: 365, 355, 475, 410 mm
... predefined configuration ranging from single X axis to complete 6 degree-of-freedom (DOF) motion system. The choice from our standard electronics makes the CHARON2HD system scalable in performance to best meet the targeted ...
ETEL S.A.
Repeatability: 5, 10 µm
Load: 4 kg - 25 kg
Speed: 0.1 m/s - 10 m/s
... repeatability, at even higher dynamics. With embedded support to proper sample alignment, the module then allows further control of wafers planarity, with respect to equipment heads, by means of its additional “tip” and “tilt” axes. ...
ETEL S.A.
... Servosystem (belonging to Setec Group) is able to project and realize mechatronic systems from simple pre-configured positionings to multi-axis systems with controls based on the most ...
... The Multi-Axis Positioning System, manufactured by Zaber Technologies, is designed as a standalone device that can be utilized for positioning probes under a microscope either by joystick or computer ...
Zaber Technologies - Vancouver, BC
... The NFP-6561(L) by Zolix is a High Precision Fiber Alignment Stage which comes with a sensitivity of 1μm and a staightness of X,Y,Z axis of about <3μm. For its dimension, it has Tx which is 13mm and TY which is 13mm. ...
Zolix Instruments CO.,LTD
... Use: positioning with opposed movement adjustable with worm screw in combination with non-standard carriages constructed by the customer.To reduce set-up times for format changeover (e.g. long packaging lines or bundling machine outfeed ...
BETT SISTEMI
Repeatability: 0.5 µm
Load: 0 g - 5,000 g
Stroke: 10 mm
... MAUKA is a compact hexapod designed to position up to 5 kg payloads with a submicrometer resolution. MAUKA hexapod offers travel ranges of 10 mm in X and Y, 20 mm in Z, and 16° in the three rotations. Its diameter is 107 mm and it is 198 mm height ...
SYMETRIE
... General The SeGMo- Positioning forms a compact mechatronic unit comprising a brushless DCmotor, a 32-bit microprocessor, a compact power amplifier and a powerful gear, as well as a magnetic multiturn encoder. Active system ...
LENORD + BAUER
... 5-Axis Machinable Blanks Jergens Workholding Solutions presents a truly modular approach to 5-Axis machining. Machineable blanks provide the flexibility to further customize your application Designed for parts that require a 2nd operation. The workhold ...
Jergens, Inc.
Repeatability: 1 µm
Load: 15 kg
Stroke: 200 mm - 1,000 mm
... concept - Extension of degrees of freedom for XYZ-Rx-Ry-Rz motions - Individual solution finding with 3D design for the positioning task ...
Steinmeyer Holding GmbH
... Boom system Carbon fibre axis with linear motor Linear motor axis with carbon fibre axes Stop-and-go system for automatic positioning applications ...
JAT - Jenaer Antriebstechnik GmbH
... The SG Stop System is an entry level programmable stop. It is priced right, yet very rugged and simple to use. All you do is enter the length required and press go. It can be mounted to move left to right or right to left and is available ...
... Positioning system Witte TopPos: Fast, accurate and economical to the contact point The TopPos modular positioning system extends Witte's range of high-end fixturing systems ...
Horst Witte Gerätebau Barskamp KG
the best suppliers