|
|
|
|
|
|
Nexera - The Only No Compromise UHPLC System
UHPLC systems represent the latest development in liquid chromatography instrumentation. Beside enhancements necessary to operate with sub 2 µm particle columns, they differ from each other through their versatility in handling various applications on the same instrument without any changes.
Shimadzu's new LC-30A Nexera is unsurpassed in high-speed and high-resolution analysis and productivity. It meets the needs of the most demanding markets such as pharmaceutical and the food industry.
Nexera pumps offer a flow range from 0.0001 ml/min up to 3ml/min with 130 MPa pressure and from 3.0001 up to 5 ml/min with 80 MPa pressure. This allows the use of longer columns for covering fast LC with high flow rates and short columns as well as highest resolution using long columns.
The new developed micro-reactor based mixer supports a small system volume and very short gradient delays. The Nexera autosampler provides reduced carryover compared to the previous instruments by keeping the direct injection with isolated metering system principle using 3 rinse solvents, various rinsing modes and design changes at needle and needle seal. To increase the throughput overlapping pre-treatment can be used. The pre-treatment capabilities expand the application range of this instrument.
LC-30A Nexera can be used for semi-micro, conventional and UHPLC methods without changes on the flowline. It fulfils the demands of an all-round LC system with high reliability and robustness.
For further details please visit http://www.shimadzu.eu/nexera/
|
|
|
|
|
|
Prominence UFLC
Ultra Fast Liquid Chromatograph
In Pursuit of Higher Speed and Uncompromised Separation
The goal of high-speed HPLC is to enhance the laboratory’s productivity. We believe that analytical data obtained from high-speed HPLC must be as reliable as the data from conventional HPLC. For example, resolution must be maintained at an excellent level in the case of 10,000 analytical runs by high-speed LC, retention time and area repeatability must be excellent for small volume sample injection, the need for replacement parts should be minimized, and the instrument must work stably.
We successfully achieved speed and separation performance levels that do not depend on high pressure, while simultaneously offering a high level of precision and expandability not available with previous fast LC systems.
The combination of Prominence UFLC and new reversed-phase columns achieves ten times higher speed compared to a conventional HPLC system. Furthermore, a high-speed sample injection mechanism significantly reduces total analytical cycle time. With this combination, Prominence UFLC offers three times higher resolution than conventional HPLC so that the possibility of analysis is increased for samples that are not sufficiently separated by conventional HPLC.
The high-precision solvent delivery unit and autosampler improve repeatability in small volume sample injections for high-speed LC, achieving and maintaining excellent repeatability during long endurance tests.
|
|
|
|
|
|
Since 20 years HPLC systems from Shimadzu are well known as reliable, ease to use instruments for routine analysis providing excellent performance for various applications. The broad range of instruments is designed to exceed requirements from R&D laboratories as well as QA/QC labs, from micro up to preparative HPLC:
- Modular HPLC for maximum of flexibility LC-20A prominence series
- Compact HPLC for routine application LC-2010
- Preparative HPLC modules LC-8A
- Special system solutions - e.g. sample preparation for LC-NMR and LC-MS Co-Sense
- Ionchromatography systems - CDD-10Avp and PIA-1000
Data Processing
Beside integrators, different software packages are available for data acquisition, data processing and supporting FDA compliance requirements.
FDA and GLP/GMP requirements
Shimadzu offers support to meet requirements for work under GLP/GMP conditions as well as getting compliance to FDA 21 CFR Part 11 criteria's. Our software packages Class VP and Lab Solutions include audit trails functions for method, data and system operation, our software solution concept CLASS Agent offers support for database assisted handling of analytical data for the complete laboratory incl. electronic signatures and electronic records.
|
|
|
|
|
|
Surveyor Plus HPLC System
The Surveyor Plus family of HPLC instruments is specifically optimized for the most demanding HPLC and LC/MS applications. Short cycle times, high sample capacity, low flow rate performance, and patented LightPipeTM technology have been integrated into one complete system for high-throughput sample processing environments.
The versatility of the modular design, featuring custom quaternary pumping solutions, provides flexibility for a wide variety of applications, from routine compound analysis to more complex matrices. This high-throughput system can be operated as a stand-alone HPLC or seamlessly coupled with the industry-leading Thermo Scientific mass spectrometers, providing a complete LC/MS solution.
Improve HPLC Sensitivity up to 5x with the Patented LightPipe Technology
The patented LightPipe™ technology provides up to five times the sensitivity of a conventional photo diode array detector and the integrated column oven offers exceptional chromatographic stability. Method development using the Surveyor Plus HPLC system is easily optimized because of its multiple injection modes, which include full loop, partial loop, and no waste. Several detector options increase application breadth with the capability of adding a fluorescence or a refractive index detector, which seamlessly integrate into the Surveyor Plus HPLC system. The ChromQuest Chromatography Data System (CDS) provides tools for 21 CFR Part 11 compliance requirements and complete system validation. The compilation of these innovative technologies and features provides your laboratory with the complete chromatography solution.
|
|
Varian 940-LC Analytical to Prep HPLC
Scale Up to Superior Performance and Reliability
The Varian 940-LC high performance liquid chromatograph is a fully integrated, pre-configured and pre-tested system. A complete solution in a compact footprint, the automated Varian 940-LC meets all your analytical and preparative chromatography needs today, and into the future.
The Varian 940-LC delivers:
- High performance analytical HPLC
- Fast, easy scale-up to preparative HPLC
- Flexible configurations
- Unmatched concentration range
- Versatile detection
- Superb, practical injections and collections
- Simple, productivity-boosting software
|
|
|
|
|
|
The Tempo™ ht LC is a high throughput liquid chromatography system for applications such as metabolomics and drug discovery.
- Fast, accurate, and reproducible gradients.
- Simple mechanical design requires less maintenance.
- Flow rate feedback for each mobile phase maintains precise nano-scale flow rate control.
- Simple, easy-to-use software for system setup and control
Tempo™ ht LC System
The Tempo™ ht LC system is a single-channel HPLC that has been optimized for fast, high-throughput applications. The system includes binary solvent delivery for high pressure gradient mixing, microfluidic flow control (MFC) for fast, precise flow control, variable volume injection, and an integrated array-based UV absorbance detector.
Faster assays, lower running costs
The Tempo™ ht LC system provides efficient, high-speed chromatography. Low volume, high efficiency gradient mixing and innovative flow control provide fast, accurate, and reproducible gradients to rapidly analyze multiple components in complex matrices. Fast gradient change response and re-equilibration make this system ideal for high throughput applications. Rapid, precise flow adjustment and minimum dead time increase analysis speed while decreasing solvent waste, significantly reducing running costs.
|
|
Features:
- A completely flexible system that is customizable for any laboratory with quality HPLC components options: binary or isocratic pump, automated or manual injector, UV/Vis, refractive index, multi-λ fluorescence, evaporative light scattering, or photodiode array detector
- Intuitive interface with Breeze 2 Software that allows for easy set-up, operation, and minimal training
|
|
Ambient to high temperature GPC chromatograph/consumable
Polymer Laboratories (PL), now a part of Varian, Inc., is a market leader in providing tools for the analysis of polymers by GPC/SEC. With a full complement of products to cover the spectrum of applications, we can help you analyse your material, no matter how challenging.
Instruments for GPC/SEC
Modular and integrated GPC/SEC instrumentation is available from PL to cover the range of applications from simple room temperature analysis to high temperature analysis of engineering polymers, all with simple intuitive control and in-built safety features.
Columns for GPC / SEC
PL produces the PLgel, PL aquagel-OH, PlusPore, PL Rapide and PolarGel ranges of columns for organic and aqueous GPC/SEC analysis. Mechanically rugged columns packed with high resolution, high quality gels ensure that Varian PL columns are a leading force in GPC/SEC.
|
|
|
The Viscotek High Temperature GPC (HT-GPC) System is a revolutionary advanced detector system specifically designed for the characterization of polyolefins, natural and synthetic polymers, nanoparticles and other large molecules. Representing a breakthrough in high temperature technology and engineered in a modular format for flexibility, reliability and easy maintenance, the new Viscotek HT-GPC operates from 30 to 175 degrees C and is configured as follows
|
|
All essential preparative HPLC features in one module : pump, variable volume dynamic mixing chamber, automatic injection valve, detector, fraction collector and panel PC all piloted by Armen Glider Prep software (AGP).
This integrated solution provides the easiness of use of a flash chromatography system and the efficiency of a preparative HPLC column.
Set up columns from 4 up to 80 mm external diameter.
Control backflush valve and/or columns switching valve available as option.
|
|
|
|
|
|
881 Compact IC pro / 882 Compact IC plus for ion chromatography.
Intelligent. Reliable. Precise.
The 881 Compact IC pro and the 882 Compact IC plus are ideal for users in all fields with clearly defined analytical requirements. These instruments ensure the rapid and safe determination of anions, cations and polar substances in the parts per billion (ppb) to the percent (%) range.
All intelligent functions of the Professional IC instrument series have been integrated into the
new compact instruments 881 and 882: iPump, iDetector, iColumn technology. These features guarantee precise results and help prevent operator errors. The MagIC NetTM chromatography software controls all system components and monitors all parameters that are relevant to the chromatographic analysis.
The highlights
• Intelligent ion chromatography
• For routine analyses that satisfy the highest demands in the range ppb – ppm – %
• Limits of detection <1 ppb
• Space-saving footprint, compact design
• Excellent price-performance ratio
• Complies with all GLP and FDA requirements
• Intelligent system components: iPump, iDetector, iColumn
• System control by MagIC NetTM
• Comprehensive monitoring and control functions
• Wide range of automation options
• Unique Metrohm Inline Sample Preparation – MISP
• Reliable, accurate and precise ion analysis
|
|
|
|
|
|
Metrohm offers fully automated Inline Eluent Preparation On Demand (EPOD)
Apple’s iPod is nice to have, Metrohm’s new EPOD is a must-have – if you do ion chromatography but want to spare yourself the tedious manual preparation of the eluent.
By using the 800 Dosino and the 849 Level Control as the only additional devices, Metrohm’s intelligent ion chromatography (IC) systems can be easily extended to perform any unattended inline eluent preparation. Fully controlled by MagIC Net, the 849 Level Control monitors the eluent level while the 800 Dosino performs all dosing and liquid handling tasks.
The Dosino automatically dilutes a concentrate with ultrapure water and subsequently transfers it to the eluent bottle. With a dilution factor of 20, a two-liter bottle of concentrated eluent translates into an unattended running time of a whole month. Is it reliable? Yes, in a test, consecutive injections of a 250 µg/L muli-anion standard over a 21-day period revealed an outstanding retention-time stability.
|
|
|
The easy-to-use ICS-1600 system provides excellent performance with isocratic IC methods. Run 2 mm columns routinely to greatly reduce eluent costs. Add automated sample preparation capabilities (matrix elimination and filtrate, for example) with the optional, integrated 6- or 10-port sample prep valve. With dual-piston pumping, electrolytic suppression, and column heater all standard, this compact, integrated instrument offers outstanding sensitivity and stability.The vacuum degas option delivers even quieter baselines for trace-level work. Operate in manual or automated mode using a convenient touch-screen status panel or Chromeleon® software. For traditional IC applications, the ICS-1600 is a great choice.
|
|
|
|
|
|
Multi Column Switching MCS
The most advanced column switching system available, providing unsurpassed flexibility for gas chromatographic analysis.
The multidimensional heartcutting chromatography system from GERSTEL finally does away with the complexity and operational difficulties of the past. The system is based on advanced electronic pneumatic control EPC and GERSTEL GRAPHPACK technology allowing unprecedented ease of use and reproducibility. All aspects of system operation are controlled through GERSTEL Maestro software, no complicated pressure balancing or cut table definitions are required. No other system can analyze complex samples this easily.
Features:
- Independent flow control of pre-column and analytical column.
- Integrated Cold Trap System
- Pressure- and flow programming using EPC pneumatic systems.
- Easily installed in new or existing GC systems.
- Convenient MAESTRO software control
Applications:
- On-line clean up using a combination of columns with different inside diameter and film thickness.
- Optimum GC separation, even when combining capillary columns of widely differing diameter, flow and length.
- All Dual Column Switching DCS applications.
|
|
Speed and Sensitivity
The Agilent 3000 is a powerful GC solution that provides fast, accurate, reliable analysis of your gas sample on-line-–right at the sampling point. It is ideal for the rapid analysis of gas streams in fuel cell development, coal mine safety monitoring, and the hydrocarbon processing industry, including refineries, natural gas production and distribution, chemical operations, and oil and gas exploration. The robust construction of the modular 3000 micro GC means long-term, trouble-free operation. The easily interchangeable GC modules make reconfiguration and repair quick and simple, to keep you in control of your gas analysis and your process.
|
|
The Series 400 and 400-P Isothermal, Thermal Conductivity Detector (TCD) Gas Chromatographs are rugged, compact, affordable, service-free GCs designed for high capability performance while withstanding rough, student or industrial use. They meet the demands for teaching the principles of gas chromatography, chemistry and biochemistry. As of January of 2005, the Series 400 GCs has replaced our very popular Series 350 GCs.
- Isothermal Operation
- Detector: Thermal Conductivity Detector (TCD)
- Direct On-Column Injection or Gas Sample Valve (manual or pneumatic)
- Single or Dual Column
- Microscale Compatible: heated, threaded exit ports (optional)
- Accommodates 1/8” or ¼” o.d. metal or 6 mm glass columns
- Signal Amplifier, x10 (optional)
- Independent, Direct Set, Temperature Controls for Column Oven, Detector, Injection Ports
- Operating temperature: ambient to 300 °C
- Power: 110-220 V, 50-60 Hz
|
|
|
|
|
|
Our many years of experience and innovative technologies in the fi eld of process gas chromatography will be very much to your advantage.
Overview productportfolio:
For standard process applications: MicroSAM
MicroSAM is the smallest explosion-proof online process gas chromatograph from Siemens. Everything needed for separation and detection of the measured sample is integrated into the space of a small platter.
For flexible process applications: Maxum edition II
The Maxum edition II combines a wide variety of modules with a flexible oven concept. It is also ideal for complex applications.
For the determination of calorific values in the on-line natural gas analysis: SITRANS CV
SITRANS CV has been especially developed for fast, exact and reliable determination of heating values. Based on the proven MEMS (micro electro mechanical systems) technology of MicroSAM and an operation software which is special designed for fiscal metering purposes the analyser combines reliable technology with high ease of use.
|
|
|
|
|
|
ABB on-line process gas chromatographs (PGCs) are comprised of three series: The PGC1000, PGC2000 E2 and the PGC5000. The PGC1000 is a field-mounted PGC and measures C1 through C9+ hydrocarbons, inert gases, and H2S in various HPI streams. The PGC2000 E2 measures discrete hydrocarbons up to C26 in HPI streams. This base PGC is also used in specialty analyzers for measuring fuel Sulfurs and speciates Sulfurs, refinery distillation analysis and temperature programmed analyzer for measuring hydrocarbon streams with a wide range of boiling points. The PGC5000B is used to measure up to C26 in simple applications with a fixed set of features.
The ABB PGC1000 is an economically priced field mounted gas chromatograph (no shelter required) using two analytical trains per analyzer that enable measurements of C1 through C9+, inerts and H2S in various Hydrocarbon Processing Industry (HPI) streams.
- C6+ component analysis with five minute analysis time
- Four streams with manual cal or three streams with auto cal
- Dual Calibration streams capability
- Class 1, Division 1, Group C and D classified enclosure
- Operating Temperature Range 0-130 degrees Fahrenheit
- Low power consumption -- 6 watts nominal, 45 start-up
- Windows CE Operating System
|
|
The award-winning ICS-3000 meets a wide and ever-increasing range of application needs. From an entry-level IC for routine, dedicated analysis to a high-throughput, dual RFIC TM system, the ICS-3000 is truly designed for versatility and productivity. The system can be upgraded to a dual system configuration—without taking up more valuable laboratory bench space.
Significant performance enhancements make the ICS-3000 the most reproducible, stable, and sensitive ion chromatography system available today. Dramatic improvement in flow rate accuracy, eluent generator electronics stability, and conductivity cell temperature control increase baseline stability and enhance sensitivity. Each module offers new innovations for increased performance and help your lab become more productive.
|
|
|
|
|
|
The Series 600 is a fully programmable research grade gas chromatograph. Each GC is custom manufactured to your specific application, whether it is environmental, petrochemical, pharmaceutical, food and flavors, solvent or industrial chemicals.
- Microprocessor controlled temperature programming (CPU: 33 MHz 80386SX)
- Processing ability: 32-bit
- Detectors: TCD, FID, PFD, or PID (dual detector capability)
- Detectors independently temperature controlled operated singularly, in series or in parallel
- RS-232 and RS-422/RS-485 communication interfaces
- Temperature programming in 1 °C increments
- Programming rate: 0.1 °C to 40 °C/min in 0.1 °C increments
- Column temperature range: ambient +5 °C to 450 °C
- Column temperature overheat protection
- Ten ramp oven temperature programming control
- Store up to 10 methods with security PIN
- Injection modes: direct packed; capillary — split/splitless; gas and liquid sample valves
- Three independently controlled injection modules maximize efficiency, accuracy, and reproducibility
- Electronic pressure programming (EPP) (optional)
- Six external events and five heated zones
- 8-line EZ-view LCD display with touch keypad user interface
- Differential flow controls
- Corrosion resistant systems available
- Power: 120-240 V, 50-60 Hz
|
|
|
The EM 640S is a mobile GC/MS system with laboratory analytical specifications designed for the fast and accurate, high sensitivity analysis of organic compounds in the environment.
|
|
|
|
|
|
Flexar™ - Reach for more choices in LC Analysis
PerkinElmer is revolutionizing the LC industry with its Flexar line of products and accessories-- the ultimate in HPLC and UHPLC technology. With the widest range of pump options available (from 6K psi to 10K psi to 15K psi), Flexar delivers a solution that will meet your application needs. The entire line has been completely re-designed to make your LC experience easier and faster. No detail has been overlooked, from the ergonomic design to the improved separation efficiency to the new Chromatography Data System—Chromera.
The new FX-15 offers the ultimate in UHPLC for advanced applications:
18,000 psi operation for the most demanding UHPLC application with more than 10x productivity improvement
Green productivity: mobile phase solvent consumption reduced by 10-15x
Chromera® - LC Chromatography Data System (CDS)
Get ready for instant gratification.
One click and you will see: CDS doesn’t get any easier than Chromera. Combining intuitive ease of use with powerful functionality and configurability, Chromera delivers the most streamlined way to get from the analysis you need to the information your enterprise demands.
Chromera’s patented Device Manager controls the state-of-the-art Flexar HPLC and UHPLC instruments. The extensive suite of automated tools allows you to easily visualize data and efficiently communicate results through an immediate and accessible workspace. Everything you need to get the job done quickly and easily is at your fingertips.
|
|
The UltiMate® 3000 Rapid Separation LC (RSLC) solution combines unique hardware, software, and chemistries to meet all your separation requirements. You can achieve ultrafast separations, rapidly separate high sample loads, or enjoy high resolution with maximum peak capacity. The RSLC system is available in binary, quaternary, and x2 dual system variants [more].
The RSLC systems provide flow rates up to 5 mL/min and support pressures up to 800 bar (11,600 psi). This extensive flow/pressure footprint provides maximum application flexibility. Simply work with your column of choice in the appropriate zone for your application. RSLC covers them all.
|
|
| ... products without technical information |
| |
|
|
Chromatographs
