|
|
| Products 91 to 120 of 177 |
This product group consists of modems that can be connected to the public telephone network. The modems are approved in most European countries and in many countries in other parts of the world.
Westermo modems are designed for industrial applications, which means that there are functions built in to them that are especially useful in industrial systems like for instance PLC connection mode and DIP switch settings. The Westermo products have a watchdog function and are galvanically isolated to give reliable communication in harsh environments. Some of the modems can also be used on 2- or 4-wire leased lines over very long distances. We also have modems that can be used for long distance multidrop applications.
|
|
|
AS-Interface networks up to 62 field devices onto a single pair of wires that delivers both signal and power. Actuator Sensor Interface, or AS-Interface, was developed by a group of sensor manufacturers and introduced into the market in 1994. Since that time, it has become the de facto standard for discrete sensors in process industries throughout the world. AS-Interface may be used in hazardous process environments using explosion proof, tray cable, nonincendive and for nonincendive wiring protection concepts.
|
|
MOFR are compact DIN-rail-mounted signal repeater units that convert time sync signals from copper or fibre input to copper and fibre output, providing electrical isolation between equipment being synchronized.
The MOFR receives a source time sync signal on the input side (either TTL, RS232, RS422 or ST Fibre) and reproduces the signal on the output side:
- TTL/232/422 simultaneously
- HV switching
- ST Fibre Tx
- Amplitude Modulated (AM) IRIG-B (from DC IRIG-B input or AM IRIG-B input).
|
|
|
OADM Module Low Insertion Loss High Channel Isolation Epoxy-free in Optical Path Telcordia Compliant 1, 2, 4, 8 Channels Configuration RoHS Compliant
|
|
|
Multiplexers 4 to 16 synchronous or asynchronous lines RS232 on optical fibres. Presentation in rack 19 " Interfaces RS232 Taken subD 9 pins, optical fibre ST or SMA. Range 2.6km minimum on a fibre 50/125. Adaptable and modifiable easily with a particular need.
|
|
|
The FAC 1000/2000 is a multiplexer oriented to multi-point communication with several devices using fiber optic. It provides one or two inputs and multiple outputs.
|
|
|
|
|
|
A variety of casings can be offered for piezosystem jena switches. Depending on customer requirements, plug-in casings are available as well as screw slot casings and special custom size rack mount casings.
The casing not only protects the mounted fiber, it’s also the basis for easy integration of this part into your existing system.
Optical Interface
All fiber switches come standard with 1m output optical fibers and assembled connectors per customer request. Also, switches with plug in connectors (bulk head) are available. In this case, the customer can select his socket type. In each case, the customer is free to select an additional outside cable length according to his requirements.
PC connection
The switches can be controlled by TTL signal (for type 1x1 up to 1x2 channel configurations) and BCD Code (via parallel port) for 1x3 up to 1x81 channel configurations. Controlling Demo-Software comes with every switch.
Power Supply
The operating voltage for the switch configuration 1x1 and 1x2 is 7-12 V DC or 7-9 V AC. The multiplexer with a channel configuration of 1x3 up to 1x81 needs 5V DC.
piezosystem jena offers wall power supply modules for each switch as an option.
|
|
|
The ASM series (Advanced Signal Multi-scanner) offer a great time-saving automatic solution to calibrate multiple temperature sensors at the same time. The ASM series is an eight channel scanner controlled by JOFRACAL software on a PC. Up to 3 ASM units can be stacked to calibrate up to 24 sensors at the same time. It can handle signals from 2-, 3- and 4 wire RTD’s, TC’s, transmitters, thermisters, temperature switches and voltage.
|
|
|
|
|
|
|
The Cobra series CME-822E is a highly reliable and fault-tolerant Industrial 10-port Managed Power over Ethernet Switch. It supports eight PoE injector ports classified as power source equipment (PSE). CME-822E offers state of the art design with eight 10/100 Mbps Ethernet ports and two small form pluggable (SFP) ports that supports Gigabit SX or LC depending on your existing network structure. The innovative SFP fiber slot design provides user the flexibility to insert different fiber modules, either multi-mode or single-mode at various distances, whether you require typical 10km or overhaul 40 km, 80 km and 120 km distances. With its high performance switching device, CME-822E provides redundant self-recovery mechanism in less than 10ms on full load which allows you to establish a redundant Ethernet network to build a back-up ring topology. Dual homing and Ring coupling are supported to add reliability by allowing a device to be connected to be network by way of two independent connection points. CME-822E offers powerful network management functions including SNMP, SMTP, SNTP, Quality of Service, Class of Service, IGMP, Snooping, LACP, DHCP, VLAN, RMON, Port Trunk, Port Mirror, User Authentication (Radius) and IP Security. The CME-822E is equipped with a terminal block to provide dual power inputs with reverse polarity protection. Its IP-30 housing protection, wide operating temperature of -40 to 80 and DIN-Rail mounting is suitable for an industrial environment. The CME-822E is a plug-and-play solution for your Power over Ethernet applications.
|
|
JetNet 3705-24V is an Industrial 5-port PoE switch, designed to fulfill the specific needs of transportation system networks. JetNet 3705-24V integrates Korenix patented 24V vehicle PoE technology – the 24V to 48V power booster for making the deployment of standard PoE IP cameras feasible on buses, railcars, ships, harbors, etc.
Combined with rugged fan-less design, including vibration resistance and -40~60℃ wide operating temperature, JetNet 3705-24V overcomes the harsh conditions and ensures network reliability on all types of public moving vehicles.
Key features of JetNet 3705-24V are:
* 5 Ports 10/100 TX Industrial Switch with 4 PoE Injectors
* Korenix Patented Built-in DC 24 to 48V Booster for rail, bus, transit transportation
* Embedded 4-port IEEE 802.3af PoE, delivering 15.4W per port
* -40~60℃ wide operating temperature for hazardous environment
* Redundant 24/48 VDC power inputs with overload current protection
|
|
|
|
|
|
The RuggedSwitch® RSG2100P is an industrially hardened, Power Over Ethernet (PoE) enabled, fully managed, modular, Ethernet switch specifically designed to operate reliably in electrically harsh and climatically demanding utility substation and industrial environments. The RSG2100P's superior ruggedized hardware design coupled with the RuggedSwitch™ Operating System (ROS) provides improved system reliability and advanced networking features making it ideally suited for creating Ethernet networks for
mission-critical, real-time, control applications.
The RSG2100P comes standard with 4 10/100BaseTX 802.3af (PoE) compliant Ethernet ports and offers modular flexibility of up to
15 additional Ethernet ports including 10BaseFL /100BaseFX/ 1000BaseX fiber and 10/100/ 1000BaseTX copper port combinations. The RSG2100P is highly versatile and can support multiple fiber types and connectors (ST, MTRJ, LC, SC) without loss of port density.
The RSG2100P is an ideal solution to power and connect several Ethernet devices (such as IP phones, video cameras, and wireless access points) where AC power is not available or cost-prohibitive to provide locally.
|
|
|
|
|
|
Introduction
Moxa's EDS-P510 is a 10-port industrial Gigabit managed Ethernet switch with PoE capability that can power PoE devices over Ethernet in any difficult-to-reach outdoor and harsh locations. The EDS-P510 has four PoE ports to deliver 48 VDC at up to 15.4 watts and 10/100 Mb data transmission per port. Up to three Gigabit SFP/TP combo ports can be used to form a redundant Gigabit ring backbone with ultra fast failover using Turbo Ring technology and Gigabit uplink to the core switches or control centers.
The EDS-P510 supports automatic detection and protection when 802.3af-compliant devices are not attached, fast fault recovery for powered devices, and a power limit control mechanism to save unnecessary power consumption. Furthermore, an hourly/weekly scheduling mechanism is equipped to fulfill economic power consumption and application-specific needs.
Features
• IPv6 Ready logo awarded (IPv6 Logo Committee certified)
• 4 10/100Mb PoE ports to power IEEE 802.3af compliant devices
• Up to 15.4 watts at 48 VDC per PoE port
• 3 SFP/TP Gigabit combo ports
• Turbo Ring (recovery < 20 ms) for Ethernet redundancy
• QoS, IGMP snooping and GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON, IEEE 802.1X, HTTPS, and SSH supported
• IEEE 1588 PTP for precise time synchronization of networks (Q3 available soon)
• Modbus/TCP industrial Ethernet protocol supported (Q3 available soon)
• -40 to 75°C operating temperature range (T models)
|
|
|
|
|
|
Highlights
High Speed Air Connectivity: WLAN interface support up to 54Mbps link speed
Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
Support AP/Bridge/Repeater/AP-Client Mode
IP67 standard compliant
Fully Compliant with IEEE802.3af POE specification
Secured Management by HTTPs and SSH
Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper
LLDP supported for topology view through Open-Vision
Support 802.1x security and radius
Features
WLAN interface supports up to 54Mbps link speed
Various kinds of operation modes supported: AP/Bridge/Repeater/AP-Client mode
Various kinds of encryption supported: WEP/WPA/WPA-PSK(TKIP,AES)/WPA2/ WPA2-PSK(TKIP,AES)/802.1X Authentication
Environmentally sealed by IP67 grade protection and ultrarugged enclosure fir toughest industrial usages
Wireless connecting status monitoring
Versatile modes & event alarm by e-mail
HTTPs & SSH protocol supported for secured management
IP table to prevent access from unauthorized IP address
IP Configurable by Windows utility (AP-Tool)
|
|
Communication Products
Auto sensing switch for use with analog CO lines and VoIP lines connected to single output.
|
|
Lantech Industrial Switch series are designed with three unique hardware features:
1. Able to use AC power adapter
2. Terminal block is placed on the bottom of device to isolate dust and water proof
3. Auto detect with DC12V to 48V.
Lantech Industrial Switch series are designed to meet with critial network environment with IP 30 enclosure and test under extensive Industrial EMI and Safety standards. Each of Lantech Industrial Switch are passed under 1.2KVA Hi-Pot abnormal test.
|
|
|
|
|
|
Moxa's EDS-G308 series is a full Gigabit unmanaged switch with 8 Gigabit Ethernet ports and up to 2 fiber optic ports, which make them perfect for upgrading an existing Fast Ethernet network or connecting multiple Gigabit-enabled devices in industrial applications. Robust performance and reliability are achieved through redundant wide-range power inputs (12/24/48 VDC), a -40 to 75ºC operating temperature range (T models), alert functions for power or port failure, broadcast storm protection, an IP30-rated metal housing, and a solid 5-year warranty.
With the EDS-G308, users can establish cost-effective and powerful 1000 Mbps connections that can instantaneously transmit a large amount of data across a network. In addition, their fiber option allows the mixing and matching of various media options to offer greater flexibility.
Features:
•Gigabit speeds on every port
•Maximum cost-effectiveness
•Configurable 10/100/1000-TX and/or 100/1000-FX
•Redundant dual 12/24/48 VDC power inputs
•-40 to 75ºC operating temperature range (T models)
•Relay output warning and broadcast storm protection
|
|
The Scalance family of unmanaged switches offer a cost effective connection of devices to the Industrial Ethernet using a line or star topology where simple plug-and-play connection and low cost port expansion are important requirements
Five full-duplex (10/100Mbit/s) RJ45 ports with rugged metal industrial housing and DIN rail or wall mounting
Industrial switch comparable to office switch-port prices
Convenience of having an Ethernet switch and connectivity in every panel
Plug-and-Play connection nothing to configure
Combined with the Industrial Ethernet FastConnect RJ45 connector, the integrated holding flanges on the port connection provides permanent and reliable data communication
|
|
Lantech Industrial Switch series are designed with three unique hardware features:
1. Able to use AC power adapter
2. Terminal block is placed on the bottom of device to isolate dust and water proof
3. Auto detect with DC12V to 48V.
Lantech Industrial Switch series are designed to meet with critial network environment with IP 30 enclosure and test under extensive Industrial EMI and Safety standards. Each of Lantech Industrial Switch are passed under 1.2KVA Hi-Pot abnormal test.
|
|
|
|
|
|
Moxa's EDS-608 series is a cost-effective compact modular managed switch that allow users to install up to 8 fast Ethernet ports through various 4-port copper and/or fiber interface modules to create tailored switch solutions that best suit your automation network.
Advanced Proprietary Turbo Ring™ and Turbo Chain™ technology (with fault recovery under 20 ms) and RSTP/STP (IEEE 802.1w/D) increases the reliability and availability of your industrial Ethernet network. Several reliable and intelligent functions such as IEEE 1588 PTP, Modbus/TCP, LLDP, DHCP Option 82, SNMP Inform, QoS, IGMP snooping, VLAN, IEEE 802.1X, HTTPS, SSH, and SNMPv3 are supported to make the EDS-608 series suitable for mission-critical industrial applications.
With its compact yet rugged industrial design, the EDS-608 rugged switch series is an excellent choice for solutions that require long-lasting reliability, wide operating temperatures of -40 to 75˚C, and long-haul fiber connectivity. In addition, the switch’s compact size allows users to conserve valuable space, making the EDS-608 ideal for space-critical applications.
Features:
•Compact and space-efficient design
•Modular form factor with a rich selection of 4-port copper/fiber combination modules
•Turbo Chain™, Turbo Ring™, and RSTP/STP for network redundancy
•Complete management and security features
•-40 to 75˚C operating temperature range
|
|
|
The Avocent® Emerge® ECMS4000 extender delivers uncompromised digital workstation extension across unlimited distances. Offering high quality crisp video and highly responsive mouse interaction, this network-based product also provides CD quality audio and seamless extension of USB mass storage devices. Media-intense applications such as video editing benefit from real-time user experience while mission critical media servers are securely maintained and managed.
|
|
|
The C/Port connects desktop peripherals to a centralized PC Blade over standard Category 5 homerun cabling up to 200m. While only the size of a paperback book, the C/Port gives the user the full functionality of a Pentium dual-core or dual Xeon computer.
|
|
|
|
|
|
16-channel H.264 Full D1 Network Video Recorder with Core 2 Quad CPU and 4 internal storage drives
Features
* H.264/AVC codec
* 16 BNC inputs for video
* 16 G.711 audio inputs
* Supports Intel Core 2 Duo and Core 2 Quad CPUs, LGA775 x 1
* 4 x 3.5" internal HDD bays, 1 slim CD drive bay
* Intel Q35 + ICH9DO chipset
* Intel Rapid Recovery RAID
* Max 4GB DDR2
* 2 RJ45 GbE Network Ports
* 1 PCI-E expansion slot for discrete graphics or 4/16 channel capture card
Form Factor
2U Rackmount
H.264 Video
Compression: H.264/AVC BP codec
Video Input: 16 x BNC inputs CVBS 1.0Vp-p, with 75 ohm loading for video input
Resolution: 16-channel full D1 resolution at 30/25 FPS for NTSC/PAL
NTSC: 30FPS per channel / PAL: 25FPS per channel
Audio Input
16 RCA audio ports
G.711 audio compression
Platform
Supports Intel Core 2 Duo and Core 2 Quad CPUs, LGA775 x 1
Chipset: Intel Q35 + ICH9DO
Storage
HDD Bays 3.5” x 4 internal bays
Slim CD drive bay x 1
HDD Interface SATA II x 6
RAID
Intel Rapid Recovery
System Memory
Dual-channel DDR2 DIMM 800/667 MHz
Max Capacity: 4GB
Socket: 240P DIMM x 2
OS Supported
Microsoft Windows XP
Microsoft Windows 2003
Ubuntu Linux 7.10
CentOS Linux 5
Linux 2.6.18 ~ 2.6.22
Networking
Ethernet Ports RJ45 x 2 GbE (Intel 82573L)
Alarm /PTZ
PTZ Control 1 RS-485 for PTZ
Alarm Interface 8 DI and 8 DO terminal block
Expansion: 1 x PCI-E (x8) for independent graphic card or 4/16-channel video capture card
Power
Type / Watts: 350Watts
Input AC: 90~264V at 47~63Hz
Compliance
CE Emission, FCC Class A, RoHS
http://www.lannerinc.com
|
|
|
|
|
|
Honeywell’s Enterprise NVR (Network Video Recorder) video management system is an industry-leading enterprise class digital video surveillance solution. The Enterprise NVR is built on best-in-class components that provide the flexibility and scalability needed to design a video system suited to a variety of end user applications. Honeywell is a total solution provider offering all the components of a reliable video system such as cameras, encoders, management software, servers, workstations, and video storage units.
The Enterprise NVR Series servers are the backbone of the Enterprise class digital network video recording system. The servers run the Enterprise NVR software and manage digital video—including receiving, storing and retransmitting video when it is requested by an NVR client workstation. Enterprise NVR servers leverage industryleading IT components and are tested to sustain the rigorous demands of a video system.
Features:
* Capable of simultaneous record, playback, live view, archive, or transmission of digital video
* Receives and records a minimum of 32 channels of 4CIF
* Save user-selected video clips as a watermarked and tamper resistant Safe Data Container (SDC)
* Supports multiple layers of imported facility maps with associated cameras
* Utilizes Intel Xeon Dual Core processor technology
* 1 GB of DDR2 400 RAM
* RAID1 mirrored internal 160 GB SATAII hard disks for redundancy
* Dual channel U320 SCSI for external storage connectivity
* Dual Gigabit Ethernet ports for load balancing and maximum data throughput
* Windows® XP Professional Operating System
* Single or redundant power supply option.
|
|
This powerful, intelligent, all-in-one network surveillance recorder is extremely easy to use for multi-camera monitoring, recording, search and playback. It offers 1000 GB storage capacity, 480 frames per second recording and support for up to 64 audio channels.
Incorporating intelligent video analytics including Video Motion Filter Alarms and Video Motion Filter Searches it provides high levels of operational efficiency and security.
It can be deployed as a stand-alone system or in a small- to large-scale client/server configuration, and uses the reliable Linux operating system.
|
|
|
The innovative range of NTP LEDI NETWORK time servers updates devices connected tu ETHERNET network and clocks connected to this network. Implementation is simple : just "plug and play"
|
|
|
|
|
|
NTS-150
GPS Network Time Server
Symmetricom's Stratum 1 level NTS-150 derives accurate time directly from the atomic clocks aboard the GPS satellite system. By using an integrated, 12-channel GPS receiver, every visible satellite can be tracked and used to maintain accurate and reliable time. Even in urban canyon environments where satellite visibility can be limited, the automatic, single satellite tracking mode provides accurate time from as few as one intermittent satellite and can also track satellites using a window mounted antenna. A GPS antenna and cable is included.
Y FEATURES
Stratum 1 Network Time Server
10/100Base-T Autosensing Ethernet Interface
Synchronize Thousands of Clients
12 Channel GPS Receiver
Single Satellite Timing Mode
NTP Broadcast Mode
WinSync NTP Client Software
SNMP Enterprise MIB
MD5 Security Protocol
Upgradeable Flash Memory
Robust Chassis Design
Telnet Remote Control
Two-Year Warranty
KEY BENEFITS
Improve Network Log File Accuracy to Speed Network Fault Diagnosis and Forensics
Accurately Synchronize Mission Critical Network Operations and Applications
Cost-Effective Solution to Synchronize The Workstations, Servers, Routers, etc. on a Network
Reliable and Secure Time is Acquired From Atomic Clocks Aboard the Global Positioning System (GPS) Satellites
Window or Roof Mounted GPS Antenna Choices for Easy Installation
Thousands of Client Computer Clocks Can Be Synchronized Typically to Within 1 to 10 Milliseconds
Easy to Install Server Appliance
|
|
The T101 Time Server / GPS Clock will distribute UTC Time directly in your environment, with a high accuracy (the NTP / SNTP Ethernet frames absolute accuracy is 200 to 600 nanoseconds).
The T101 has TOP/pps programmables outputs, with fast relay @2500V isolation, with an automatic compensation of you system propragation delay.
It features also external events and alarms recorder, with 40 nano-seconds accuracy, and 2500V isolation.
The T101 is compliant to industrial standard IEC 61850.
Power over Ethernet and indoor sensitivity GPS chip are integrated in the T101, hence reducing installation costs.
The T101 is available in several form factors : 19'' Rack, DIN rail, compact or OEM.
The NT101 version (with TSIP), allows to use this server in embedded applications (railways for example).
Also, this NTP server can be connected to the popular TRIMBLE AcuTime GPS receiver (including TSIP protocol) -> see T104.
|
|
The Tekron NTS 01 GPS Network Time Server provides an economic network time synchronization solution with excellent timing accuracy (to within 1 millisecond of UTC), designed for synchronizing industrial control and SCADA networks.
The NTS 01 uses Navstar GPS satellites to generate extremely accurate time sync, providing NTP/SNTP Network Time Server function with DHCP or programmable fixed IP address and SNMP supervision. Available with up to 5 ports (with each port functioning as an NTP Time Server), the UTP network interface allows it to function as a Stratum 1 Time Server
|
|
PROFIBUS :
Link devices
Siemens offers PROFIBUS link devices for different tasks:
Communication between two PROFIBUS DP masters
Connecting RS232C devices to PROFIBUS DP
Connecting PROFIBUS devices through a wireless network
|
|
Public Address & General Alarm System ― PA/GA
Guardian Telecom partners with engineering companies, integrators, resellers and end-users to design, implement and commission small to full-blown system configurations. On-site sound surveys and computer assisted sound modeling are some of the Guardian services available to help you achieve maximum results for PA system sound coverage.
Specific client feature base and operation procedures can be customized into Guardian PA/GA systems instead of limited off-the-shelf designs. High quality components for system longevity are paramount and features such as redundant system capability make implemented Guardian PA/GA systems that much safer - for longer.
Visit the Guardian Telecom website www.guardiantelecom.com for more information on Guardian’s PAGA models as well as the full line of Industrial Communication Telephones and services.
|
|
|
|