|
|
The T-BOX MS remote terminal unit (RTU) combines the power of the Internet with modular-based architecture to create a class-leading remote control and automation solution. Equipped with one of the market’s most powerful processors, only T-BOX incorporates Web server technology with SMS reporting and remote control to give you real-time access anytime, anywhere using a standard web browser.
T-BOX MS features Plug & Go technology, allowing you to distribute your full site configuration on an SD/MMC card. Your maintenance personnel can deploy it without switching on a computer. T-BOX MS features GSM telemetry communications.
|
|
The e-lightxs Industrial Ethernet media converters have an extra small housing with a dimension of 80 x 62 x 25 mm.
The flat design of the stainless steel housing offers an extremely high degree of flexibility and safety for all kinds of indoor and outdoor applications.
e-lightxs can either be mounted onto a DIN EN rail or fastened onto the wall. A clip is already included in the scope of delivery, too.
e-lightxs is suitable wherever there is little space, e.g. in small distribution boxes.
In connection with other systems out of the e-light and DragonLine series respectively, individual applications can be realized.
|
|
|
|
|
|
Introduction
Moxa's EDS-205A/208A series of unmanaged industrial Ethernet switches in 5-port and 8-port models offer the most rugged plug-n-play Ethernet connection available for today's industrial world. Most importantly, the EDS-205A/208A series provides the best price to performance ratio, making it an excellent unmanaged networking solution for the smart network administrator. The new generation of EDS-205A/208A switches features redundant 12/24/48 VDC power inputs, -40 to 75˚C wide temperature range (T models), IP30 metal housing, extra slim size, and up to two fiber connections to give users the greatest reliability and flexibility with industrial applications in limited space.
The ruggedized EDS-205A/208A unmanaged Ethernet switches are fully compliant with UL508, Class I Div. 2/ATEX Zone 2, and DNV/GL for hazardous industrial settings to provide stable operations under any harsh environmental conditions. To fit various application requirements, the EDS-205A/208A series offers many different options, from one fiber port to two fiber ports (multi/single-mode) to facilitate long-haul data transmission.
Features
• 10/100BaseT(X) (RJ45 connector), 100BaseFX (multi/single-mode, SC/ST connector)
• Redundant dual 12/24/48 VDC, 18 to 30 VAC power inputs
• IP30 metal housing with slim form factor
• Rugged hardware design well suited for hazardous locations (Class I Div. 2 /ATEX Zone 2) and maritime environments (DNV/GL)
• -40 to 75°C operating temperature range (T models)
|
|
RS40 Full Gigabit Switches :
With its new Gigabit OpenRail switches, Hirschmann combines a concentrated Gigabit performance with high flexibility via 4 Combo ports. In this way nearly every fiber variant, such as multimode, single-mode or long haul, can be realized by the use of SFP fiber modules and, furthermore, 5 fixed Gigabit TX ports can be used.
|
|
|
This product is an interface board of PCI bus conformity equipped with Bus master transfor in accordance with IEEE - 488.1 and IEEE - 488.2. It can perform communication control or data analysis of GPIB bus line of various machinery having GPIB interface with a PC. GPIB communication driver (API-PAC(W32)) for Windows version GPIB communication, LabVIEW Attachment. Using a collection of ActiveX components for measurement system development sold separately[ACX-PAC(W32)], you can more easily develop a higher-performance application in a short term
|
|
PCI-488
- IEEE 488.2 Standard Interface
- Complete Talker/Listener/Controller
- Data transfer rates over 1 megabyte/sec
- 1024-word FIFO buffer
- 7 Interrupt lines, shared interrupt capability
- Lifetime warranty
- RoHS compliant
- Includes GPIB-488 software library for Windows XP, Windows 2000, and LabVIEW
|
|
|
GPIB products offer three key benefits that can help save you time and money throughout the life of your instrument control system - from development through production and maintenance. You can rely on hardware and software that offers improved performance, high reliability, and increased productivity.
|
|
The modular ultra precision Model XLi Time and Frequency System is the most precise, versatile and flexible solution for timing and synchronization requirements. It is also the easiest to manage via the standard, built-in HTML web interface which provides an intuitive, graphical user interface for remote configuration, control and status.
One of the great design benefits of the XLi is that, because of its variety of option cards, a customer can customize it to fit to their specific application needs. Whether your application demands redundancy in power supplies, GPS, or any other function, all it takes is the proper configuration of cards.
XLi Option Cards
The XLi's wide range of option cards also makes it easy to adapt your XLi configuration if your application needs change. Plug-and-play cards and built-in XLi option card recognition software lets you swap out modules without modifying your operating system.
|
|
The T104 module is a time server, able to synchronize automated systems and industrial networks, by several ways:
- NTP/SNTP (IEC61850 compliant), TimeStamp accuracy better than 1µs,
- IRIG (A/B),
- programmable TOP/pps signal, accuracy better than 50ns (in option, 1500V isolated relay output).
The T104 connects directly to the Timble AcuTime GPS antenna (TSIP ans NMEA protocols), even on an existing infrastructure, et the full isolation RS422 port enables cables lengths up to 400 meters and more.
|
|
|
|
|
|
Symmetricom's ExacTime™ 6000 Time and Frequency Generators are full featured GPS receivers that offer three time base oscillator options and a wide range of "off-the-shelf" optional features. ExacTime fits virtually any GPS time and frequency application.
The ExacTime 6000 is a 1.75" rack mount chassis that is configured to meet or exceed the demands of many applications, including test and measurement, metrology, range instrumentation and telecommunications. The extreme flexibility of this instrument allows configurations including time codes, low phase noise frequencies, pulse rates, parallel time and many other outputs to support specific needs. The internal quartz time base oscillator can be upgraded to an oven quartz oscillator or to a rubidium oscillator. A time zone offset control is included with 1/2-hour resolution, and a daylight saving time capability can be set for ten years. These controls affect the LCD display, time code output and the time in the RS-232 outputs. The year can be preset to any value for test purposes. For situations in which it is desirable to disable the oscillator disciplining process temporarily, a "flywheel" mode is provided. While in flywheel mode, the oscillator loop is opened, and the natural purity of the oscillator is not perturbed by the disciplining function. The ExacTime 6010 is a 3.5" rack mount chassis that is available to accommodate configurations that require more option space than is available in the ExacTime 6000 1.75" chassis.
|
|
|
|
|
|
Eurotech offers a range of rugged communication routers to the mobile, industrial and military markets.
ZyWAN
The ZyWAN 3G / GPRS cellular routing modem provides WWAN (Wireless Wide Area Network) connectivity to link remote networks and equipment with back-end monitoring services and telemetry applications. The ZyWAN is ideal for many applications including Internet access, AVL (Automotive Vehicle Locating), telemetry, SCADA, mobile computing, vehicle tracking and AMR just to name a few. The ZyWAN offers cellular connectivity for mobile and fixed assets to virtually any device, laptop or PC through multiple interfaces including serial ports, Ethernet, and optional 802.11.
www.zywan.com
DuraMAR
The DuraMAR 1000 is a rugged Mobile IP (Internet Protocol) router designed for netcentric operations in harsh mobile environments. Leveraging Cisco Systems industry standard IOS® software and 3200 series mobile access routing (MAR) technology, the DuraMAR router enables prime contractors and civil/military agencies to achieve mobile communications-on-the-move (COTM) and a wide range of new in-vehicle networking applications, from wireless Internet access to Voice over IP (VoIP) to streaming video surveillance and smart vehicle diagnostics/maintenance.
http://www.parvus.com/products/ProductPage.aspx?ProductID=147
|
|
|
The RuggedRouter® RX1000 is an industrially hardened cyber security appliance with integrated router, firewall, and VPN functionality. The RuggedRouter™ can be used to establish an electronic security perimeter around critical cyber assets found in control and automation systems, in order to prevent the disruption of operations by accidental or malicious acts. Ideally suited for electric power utilities, the industrial plant floor, and traffic control system applications, the RuggedRouter™ is designed to protect and secure SCADA system networks connected directly to the Internet, or within a company's private Wide Area Network (WAN) or Local Area Network (LAN).
|
|
The PocketPAD Router is an innovative product, which connects remote devices or a remote network, to your local network over serial, PTSN, GSM or GPRS networks. The PocketPAD Router includes support for a Dial-In PPP Service (RAS), Dial-Out (On-Demand or always on), Proxy ARP, Masquerading/NAT, IP and Port Fowarding. Onboard tools make network monitoring convenient. New features include a DHCP server and a Firewall.
Mounting options include a stand-alone desktop mount or a DIN-rail mount.
Device network connectivity via UDP/IP, TCP/IP.
Device management via Telnet, DHCP/TFTP, Web Browser, SNMP (MIB II), Built-in Serial configuration interface, Windows configuration Utility.
Flash memory for convenient software updates. Upgrade firmware over network.
Low cost and Compact size.
Lightweight.
DIN Rail mounting kit available.
Routing and PPP-over-Serial.
Dial In or Out with Authentication (CHAP, PAP).
Port Forwarding and Masquerading.
DHCP server.
Firewall.
Two RS232 serial interfaces.
|
|
|
|
|
|
The Iguana Series IRE-321 and IRE-321EC are Industrial 5-port Unmanaged Ethernet Switches with three 10/100 Mbps Ethernet ports, two multi-mode fiber ports and Redundant ring technology. The self-healing technology can recover from any network downtime in less than 300 ms. Modbus/TCP, Modbus/RTU and OPC are supported by IRE-321 Series. SCADA application can monitor status of Ethernet and fiber port with Modbus or OPC protocol. With the optic port, IRE-321 Series transmits data at high speed for long distances up to 2 km with an SC connector. The flammability protected entry-level industrial hardened Ethernet switch is specifically designed in applications where transmission must be protected from electrical exposure, surges, lightning, chemical corrosion and in hazardous locations. The IRE-321EC comes ready with conformal
coating and extended temperature of -30 to 75 degree C. In addition, the Iguana switches offer Ethernet isolation of 1500 Vrms and frame ground for EMS protection which is not a standard feature in most Industrial Ethernet devices.
|
|
WLg-SWITCH
Rugged high speed wireless 8-port Ethernet managed switch which integrate WiFi IEEE IEEE 802.11 a/b/g/h functions.
WLg-Switch is an 8-port 10/100 managed Ethernet switch over WLAN designed for harsh industrial environments and automotive applications. The unit is housed in a compact enclosure ready to be DIN rail or panel mounted. The device is a managed layer 2 switch that offers many switch technology advancements, including auto MDI/MDIX crossover for easy plug and play application, and POE PSE; WLg-Switch can be managed using a web browser or SNMP; The data key allows for quick and easy on-site replacement of the WLg-SWITCH unit, eliminating the need to reconfigure the replacement part or to use any other equipment.
WLg-Switch fulfills the most severe requirements in terms of operating
environment: operating temperature from -20°C to +70°C (-4°F to 158°F),
shockproof and vibration proof according to MIL-STD-810F standard, seal rating IP30.
|
|
|
As the leading supplier of industrial computers worldwide, Advantech has the experience and know-how to offer world-class industrial communication products for PC-based automation. Advantech’s industrial Ethernet Switches and Serial Device Servers not only have the ability to connect sensors and I/O devices from field sites and factories, but also provide an Ethernet backbone to integrate these switches and device servers in real time.
|
|
|
|
|
|
|
The Whale series WME-867-M12 is a highly reliable IP67 Industrial 8-port Managed Ethernet Switch. It has 8 10/100TX M12 ports that support IEEE 802.3/802.3u/802.3x with 10/100M, full/half duplex, and MDI/MDI-X auto-sensing. With its high performance switching device, WME-867-M12 provides redundant self-recovery mechanism in less than 20ms on full load which allows you to establish a redundant Ethernet network to build a back-up ring topology. With powerful network management functions, WME-867-M12 can be remotely configured by Web browser, managed by SNMP and RMON. Event notification can be defined via SNMP trap, Syslog, Relay output or E-mail. Security is enhanced with advanced features like Port based VLAN, Tagged VLAN and IP security. Performance is optimized by Quality of Service and IGMP Snooping/querying. The WME-867-M12 is equipped with a terminal block to provide dual power inputs with reverse polarity protection. Its metal shell robust housing and tightly sealed M12 connectors is specifically designed for vibration-proof & water resistant to secure Industrial Ethernet applications.
|
|
|
Ethernet Direct offers Moose Series Industrial Modbus over TCP Solutions whcih include industrial switches and gateways. In industrial applications, a fault-tolerant Ethernet network protects the system from downtime which will cause a great amount of losses in production. In SCADA applications, it is important that a device can monitor the status of Ethernet and fiber ports with Modbus or OPC protocol. This is the design concept of Moose Industrial Modbus Ethernet Switches. The MRM Managed Modbus Ethernet Switch supports Modbus/TCP protocol to read port status. It comes with extended temperature and conformal coating options. MRM Managed Modbus Ethernet Switch supports Modbus/TCP, Modbus/RTU and OPC protocols to provide majority of applications with seamless process. When these devices are placed into a redundant ring application, its redundant ring technology detects and recovers a fiber or copper link failure in milliseconds.
|
|
|
The Whale Series WUE-567 Industrial IP-67 Ethernet Switch is a highly reliable and fault-tolerant industrial 5-port unmanaged IP-67 Switch. It has 5 10/100TX RJ45 ports that support IEEE 802.3/802.3u/802.3x with 10/100M, full/half duplex, and MDI/MDI-X auto-sensing. WUE-567 IP-67 switch is designed for use in industrial waterproof & harsh environments. Built with IP-67 connectors, it guarantees a total protection that can withstand a variety of extreme conditions such as high temperature, extreme shock, vibration, dust particles, oil or even liquid immersion. WUE-567 IP-67 switch also has extended temperature and DIN-Rail models available.
|
|
|
|
|
|
KIEN1005
5 Port Unmanaged Industrial Ethernet Switch
KIEN1005, DIN-Rail industrial Ethernet switch, is specially designed for industrial applications. It offers five TX ports with adaptive functions, which enable it to configure automatically as 10Base-T or 100Base-TX, full-duplex or half-duplex mode. With the plug-and-play feature, it can be started up quickly.
• 10/100Base-T(X)(RJ45), 100Base-FX(SC, FC or ST connector, single mode / multimode)
• Broadcast storm protection
• Supports IEEE802.3/802.3U/802.3X
• Store and forward switching mode
• 10/100Base-T/TX, full/half duplex, MDI/MDI-X adaptive
• QoS(default high priority) service for the 5th port
• Backplane switching capacity of 1G
• Transmission delay less than 6us
• TVS (Transient Voltage Suppressor) protection of 1KV for Ethernet ports.
• Wide range operating temperature: -40 to 75°C(-40 to 167°F)
• Power input of 12V~36VDC,customization for 110VDC, 220VDC/VAC
• Reverse polarity connection protection for power supply
• IP40 protection class with aluminum casing
• DIN-Rail or Wall-mounting
• EMC industrial level 4, complies with IEC61850 standard.
• DC110V or DC/AC 220V module
• Transmission distance: 60KM、80KM、120KM
• OEM/ODM
|
|
KIEN2000
8 Port Unmanaged Industrial Ethernet Switch
KIEN2000 is an 8-port unmanaged industrial Ethernet rail switch. It offers two redundant 100Mbit/s fiber ports and six 10/100Base-T/TX TP ports. With the plug-and-play feature, it can be started up quickly. KIEN2000 offers 24V redundant power inputs.
• 10/100Base-T/TX Ethernet ports, adaptive, full/half duplex, Auto MDI/MDI-X connection
• 100Base-FX fiber ports, single mode/multimode, full duplex
• DT-Ring, high speed redundant ring network (recovery time<100ms)
• Alarm relay output for power.
• Store-and-forward switching mode conforms to IEEE802.3/802.U/802.3X
• EMC industrial level 4, complies with IEC61850 standard.
• Dual redundant 24VDC power supply(DC 18V to 36V).
• Ribbed Aluminum housing for heat dssipation (fanless); Operating at -40 to 75°C(-40 to 167°F)
• IP40 protection class
• Easy DIN-Rail mounting or optional wall-mounting
|
|
ORing offers a wide variety of managed or unmanaged switches to fit different networking environment. ORing’s new industrial Slim Type unmanaged Ethernet switches, IES-1000 slim type series, are more light, more skinny, and thus IES-1000 series is more convenient for the end users to deploy the networking environment by saving space! Further, ORing’s IES-1000 slim type series has a special separate power alarm design operated by a DIP switch.
The skinny dimensions and special power alarm design makes IES-1000 slim type series meets the demands of a variety of applications, such as power substation automation systems, intelligent transportation, telecommunication, etc., which facilitate the deployment of mission-critical applications across networks in the most cost-effective way.
|
|
|
|
|
|
Worlds fastest Redundant Ethernet Ring: O-Ring (Recovery time < 10ms over 250 units of connection)
Open-Ring support in open architecture (recovery time is depended on the other vendors ring technology)
O-RSTP support applications of complex topology with optimized RSTP technology
RSTP/STP(IEEE 802.1w/D)
IES-3080/3062 series are managed Redundant Ring Ethernet switches with 6x10/100Base-T(X) & 2x100Base-FX, 1000Base-T, 1000Base-SX or 1000Base-LX ports. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-RSTP and RSTP/STP (IEEE 802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. Another Open-Ring technology is also supported which can be applied for other vendor's proprietary ring. IES-3080/3062 series can be managed centralized and convenient by a powerful windows utility X Open-Vision. In addition, the wide operating temperature range from -40XC to 70XC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
|
|
IES-1080/1062 series are unmanaged Ethernet switches with 6x10/100Base-T(X) & 2x100Base-FX, 1000Base-T, 1000Base-SX or 1000Base-LX ports. IES-1080/1062 series support redundant power input, relay output alarm, and surge protection. The wide operating temperature range from -40XC to 70XC can satisfy most of operating environment.
|
|
|
IAR-7002-WA/WA+ is a reliable 802.11b/g WLAN Access Point with 2 ports 10/100TX ports router where ETH1 for LAN ETH2 for WAN. It supports LLDP for topology discovery and STP for wireless/wired redundant connections. It also supports 802.1X and MAC filter for security control. It could be configured to operate in 3 modes of routing function: Dynamic/Static IP route, PPPoE authentication, and Modem (56K/GPRS/3G/3.5G Modem) dial up. In the mode of Modem dial up, it support both traditional 56K modem and GPRSG/3G/3.5G Modem with USB interface. Users can set up WLAN environment to fulfill demands of various applications rapidly by dialing up cellular modems. In addition, IAR-7002-WA+ also provides PD feature on ETH2 which is fully compliant with IEEE802.3af P.O.E PD specification. This feature extends the layout up to 100 meters. Therefore, IAR-7002-WA/WA+ are one of the best solution for applications of wireless communication
|
|
RuggedSwitch™ RS969
IP66/IP67 Rated 10-Port Managed Ethernet
Switch with Gigabit Uplink Ports
RuggedRated™ for Reliability in Harsh Environments
IP67 Rated for protection against immersion in water
IP66 Rated for protection against strong jets of water
Immunity to EMI and heavy electrical surges
Meets IEEE 1613 (electric utility substations)
Exceeds IEC 61850-3 (electric utility substations)
Exceeds IEC 61800-3 (variable speed drive systems)
Exceeds IEC 61000-6-2 (generic industrial)
Exceeds NEMA TS-2 (traffic control equipment)
Hazardous Location Certification: Class 1 Division 2
40°C to +85°C operating temperature (no fans)
Cyber Security Features
Muti-level user passwords
SSH/SSL encryption
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1q) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
|
|
Brad Ethernet Product Overview
Brad automation solutions for Industrial Ethernet include cordsets, receptacles, field attachable connectors, I/O modules, PC interfaces, gateways, switches, diagnostic tools and simulation software. Applications include supervisory HMI messaging, real-time control, bridging networks & devices, physical connections in harsh environments and I/O communications.
Ethernet protocols currently supported include:
Altus - Alnet II (AL 200x, Webgate)
Alstom - SRTP (C80-35, C80-75)
Allen-Bradley - EtherNet/IP (Logix, PLC-5 and SLC 500)
GE Fanuc - SRTP (90-30, 90-70)
Mitsubishi - Melsec (A, Q)
Omron - FINS (C, CV, CS)
PROFINET
Schneider - Open Modbus TCP and UNI-TE (Premium & Micro)
Schneider - Ethway
Siemens - Industrial Ethernet ISO (S5, S7, TF and TI)
Siemens - Industrial Ethernet (S5, S7, TI)
UDP Send / Receive (Free messaging)
Development toolkit for TCP/IP protocols
|
|
DragonLine 8x10/100TX + 2x100FX Industrial Ethernet Switch (Managed/Ring)
Technical data
RJ-45 port support Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
Back-plane (Switching Fabric): 2Gbps
1Mbits Packet Buffer
8K MAC Address Table
Input Power Isolation design for Telcom application, Pass Hi-Pot test~1.5KV
Wide-range Redundant Power Design
Power Polarity Reverse Protect
Ring, Dual Homing, and Couple Ring Topology
Provides redundant backup feature and the recovery time below 300ms
VLAN
Port Trum with LACP
Bandwidth Control
Supports IEEE802.1ab LLDP
Port Mirror: Monitors traffic in switched networks
IGMP with Query mode for Multi Media Application
System event log
Quality of Service: Port based/Tag based, IPv4 ToS, IPv6 Different Service
|
|
DragonLine 10/100 TX to 1xFX Industrial Ethernet Media Converter (PoE)
Technical data
RJ-45 port support Auto MDI/MDI-X Function
Embedded 1 port PoE Injector Function
Store-and-Forward Switching Architecture
Built-in Link Lose Forwarding Technology
IP-30 Protection
DIN Rail and Wall Mount Design
DC 48V Redundant Power
Overload Current Re-settable Fuse Present
Provides EFT protection 3000 VDC for power line
Supports 6000 VDC Ethernet ESD protection
|
|
DragonLine 5x10/100TX (Slimline)
Technical data
RJ-45 port support Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
Back-plane (Switching Fabric): 1.0Gbps
2K MAC Address Table
IP-30 Protection
DIN Rail and Wall Mount Design
Wide-range Redundant Power Design
Power Polarity Reverse Protect
Overload Current Re-settable Fuse Present
Provides surge protection 3000 VDC for power line
Supports 4000 VDC Ethernet ESD protection
|
|
|
|
Communication network equipment
