|
|
The Paragon test and measurement program is part of the Paragon test and measurement system developed by Turbine Metrology LLC. Its purpose is to acquire external roundness and flatness data from a test fixture consisting of rotating test table, and one or more highly sensitive positional indicators ("gauge head").
The part to be measured is centred on the table and rotated to a pre-defined reference point. The gauge head(s) are then adjusted to value previously calibrated as a zero reference points. While the part is under test and the table is rotating, the gauge heads track the small variance in the part being tested and return values to the data acquisition system corresponding to these changes.
When the test is completed, the data is used to calculate the results of the test based upon the pre-defined tolerances of the part being tested. The data can be plotted and the results can be displayed. When the test is complete, the data can be saved for future examination, for a permanent record of the test for a particular part. |
|
Software PCDMIS developed by HEXAGON METROLOGY within the WILCOX Company equips all the range with machines of measurement of HEXAGON METROLOGY.
This powerful and easy to use software allows a vast active field of application of simple manual measurement the scanning using a definition CAD of the parts.
PCDMIS is also available off line in Simulation version allowing a reliable preparation of the range of measurement starting from definition CAD of the part.
PCCDMIS also has many interfaces allowing of rétrofiter the majority of the machines of other marks.
The retrofit of machines of measurement is an important activity of HEXAGON METROLOGY
|
|
Intense international competition and cost sensitivity forces closer focus on shorter construction cycles and faster Quality Control inspection procedures to cut downtime. To achieve success under these conditions, you need the best help you can get.
Metrolog XG for Leica
Metrolog XG for Leica - Developed by Metrologic Group of Europe - The global 3D inspection software is a standard for measuring applications in automotive, aerospace and the general precision industry.
Axyz
The modular software for Leica Geosystems Laser Trackers, Industrial Total Stations and Industrial Theodolites for day-to-day shopfloor metrology as well as point-based build and inspect.
PolyWorks
PolyWorks %u2013 developed by InnovMetric Inc., Canada %u2013 is the leading software solution for high-end point cloud inspection and reverse engineering applications.
|
|
Instruments for size inspection of the types VP and VM can be upgraded to accommodate longitudinal dynamic measurements. A longitudinal dynamic adapter and the respective electronic measuring unit are added and work together with the gear and spline software LDYN. With this configuration it is possible to dynamically detect and repeat the dimension over/between balls across the full length of the gearing during inspection. In addition, the longitudinal dynamic evaluation also reveals form errors such as crowning, conicality and roundness of the workpiece. Simple statistical values such as Cp and Cpk can also be calculated with the software.
All measured values as well as shift and machine operator data can be displayed on the monitor or exported into a ASCII-file and can then be evaluated by an external SPC software. With this longitudinal dynamic evaluation process it is possible to repeat the measuring results. |
|
Communicate key characteristics and features to manufacturing, assembly and quality.
Once the solid model definition is created in NX the AIMS Metrology Application for NX is started to create a measurement plan for key characteristics and other features on parts and assemblies. The enhanced CAD file defines datums, tolerances, and specific features that need to be measured to ensure that a quality part or assembly is produced and shipped. After inspection the AIMS file contains the original geometry definition and the measurement points and deviations and their relationship to features. This updated AIMS file can be loaded back into NX for further analysis to help improve the build process. |
|
Data Acquisition and Supervisory Control System
Pages autoconfiguration for gammadue® and/or deltadue® instruments
Data acquisition and monitoring
Process operation
Wide library of drivers
Mimic and pre-formatted pages
Real time and historical trending
Powerful alarm handling
Flexible configurable reporting
Recipe management
Security levels for operator access
Ethernet TCP/IP networking
Data exporting to commonly used databases
|
|
controlls up to 50 machines on a PC server
archiving of the production data in a database
recording and evaluation of the machine data
centralized control of the production line
real time monitoring via online-display
reduction of the production costs
reduction of the controlling staff
Analysis Options :
number of bonds, circuit boards and chips per time interval
quality result of the bond connections
downtime analysis
wire deformation graph (source and destination)
efficiency evaluation of the production shifts
time per production unit, average time per production unit, uptime calculation
bond time, average bond time
log book
data export to MS Excel
user defined analyses are possible
|
|
The monitoring systems and telecontrol of the systems are essential elements for the attainment of optimal performances of the modern industrial production.
However, the possibility to approach quickly the historical data of production and the data of instantaneous efficiency, would sure guarantee a total control of the production processes, through more detailed analysis than efficiency, of productivity and performance.
Metoda Automation has resolved this problem with DataView.
DataView is an analysis system and relative reportistica to the acquired data from database relational fed or our systems applications/expires or systems informed to us already present. To characterize and to recognize the problems before, and their causes, allow to realize timely participations of correction and prevention. In this way a better performance of the systems is determined and consequently, a better return of investment (ROI). Dataview for its tipologia and the diversification of the data of the database, is a software constructed ad hoc for the single customer and the relative necessities. The experience than more decennial in within automaton concurs industrial us to supply to the customer the reingegnerizzazione and the treatment of the data traffics, being thus produced an effective instrument for the detailed analysis of the production process.
Main functionalities of DataView
· immediate availability of the sensitive data;
· visualization and search of the data;
· elaboration of tables and diagrams;
· generation of trend and report, on the whose base to execute performance and productivity, efficiency analysis. |
|
InSpec Metrology Software provides the power of geometric dimensioning and toleracing, reporting, and data collection while simplifying the operators role in measuring parts.
Software is included with all automated systems and is optional for manual systems. |
|
The GARVENS AccessCard gives you optimum control of access to your GARVENS checkweighers. GARVENS PrintCard or GARVENS PrintStick for checkweighers not connected to a data network: instead of printing evaluations such as daily reports, statistics or counter levels at the checkweigher, you can simply save such data on a PrintCard or PrintStick.
The GARVENS LogIn-Server for quality and security conscious companies is a monitoring system creating a personalised, traceable log of when and by whom any particular checkweigher was accessed. FreeWeigh is a comprehensive SQC software package with Windows user interface which allows all production data to be centrally monitored and recorded.
GARVENS CW-ReAcT II enables remote administration and centralised maintenance of the product setup data (article data), remote monitoring of production information captured by GARVENS checkweighers such as statistics, and printing of such data. |
|
AUTO-MONTAGE FOR PERFECTLY FOCUSED 3D IMAGES
World's leading software for achieving in focus images of your 3D samples
Do you have problems getting all of your sample into focus?
Suitable for all applications
Can be used with your existing image capture system
Suitable for Optical and Stereo Microscopes and SEMs
Modular system, allows you to choose your level of automation and functionality
Depth and colour relief maps, to show height details of your sample
Anaglyph images, to view your sample as a 3D image
Flexible image and data reporting
Image enhancement functions, to optimise your image results
Comprehensice 2D and 3D measurement facilities, for increased accuracy
3D Surface Viewer, for dramatic views of your sample
Automatic Z Control, collect large numbers of images very quickly |
|
Inspection equipment and processes are both undergoing rapid changes as companies move from using 2D drawings to CAD models as the preferred method for product definition. This change, coupled with the rising demand for companies to prove the quality of their products, has led to a growing demand for inspection methods that can be used throughout the prototyping, manufacturing and assembly chain. With these techniques, any problems can be highlighted earlier in the development process and so be corrected more quickly and at lower cost.
The increased demand for inspecting parts and tools at multiple times in multiple places within the manufacturing chain requires software products that can be used on a variety of different inspection hardware platforms including Manual CMMs, CNC CMM's, Inspection Arms, Optical MMs, Laser Trackers and Line Laser Probes as well as on Machine Tools. PowerINSPECT provides a common user environment across all these hardware platforms ensuring operators can work flexibly whilst keeping the cost of training at an minimum.
Benefits include:
- Comparison against all mainstream CAD formats
- Rapid alignment even for complex freeform shapes
- Inspection of user-defined sections
- The ability to inspect along the edge of a part
- Full Geometric Inspection capabilities
- Automatic creation of inspection features from CAD nominals
- A step by step Geometric Dimensioning & Tolerancing (GD&T) Wizard
- Point, wireframe and surface export for measured entities
- CAD manipulation - including surface offsetting (e.g. reverse side for sheet metal, spark gap for electrodes)
- Fully-customisable reporting in easy-to-understand formats |
|
Particle Analyzer is a program for image acquisition and documentation that also allows for interactive and automatic measurements.
The principal aims of Particle Analyzer are the easy solution of individual measurement tasks using a guided work procedure ("Wizard") and the automation of routine activities using so-called "projects".
In addition to these automated work procedures the program may also be operated interactively via the toolbar.
Particle Analyzer is outstanding, as it is extremely easy to use. This is achieved especially by quick help texts, that may be displayed for each function during the work-flow. Even as a newcomer to digital image analysis you will be able to achieve accurate, reproducible measurement results with Particle Analyzer in nearly no time.
|
|
The Size Expert benefits :
Interactive, user-friendly software
Advanced tools for data management, statistical analysis, and report generation
Standard Operation Protocol implementation
Shape analysis
With the release of new Particle Expert software, CILAS provides you with the ability to see the shape of your particles along with your particle size distribution data. Extended calculation models are provided for the shape characterization of your product. Images of your particles can be stored along with particle size distribution data for later retrieval.
"The Size Expert" software drives all CILAS particle size analyzers with an interactive graphical display. Our intuitive, user-friendly software makes it easy to control system operation and perform calculations. The interactive graphical display shows a symbolic representation of the different particle size analysis functions, including the laser, ultrasound, pumps (wet mode) and vibratory feeder (dry mode). Simply click on one of these symbols to turn that portion of the analyzer on or off. All calculation capabilities are easily accessible in pull-down menus.
|
|
The Material Science Solutions Suite of fully automatic and semiautomatic solutions for metallographic analysis built on our SIMAGIS® platform including Grain Size Analysis :
- Porosity Analysis
- Particle Size Analysis
- Single Phase Content Analysis, ASTM E1245
- Thickness of Coating, Depth of Layer Analysis |
|
New PC software platform for all alignment systems
Alignment CENTER is the single software platform for all current PRÜFTECHNIK alignment systems. It supports shaft, straightness and flatness applications. The software possesses a database structure with wide ranging “Sort” and “Search” functions. Alignment CENTER also allows the backup of measurement files and the detailed preview of measurement results and general file information. Measurement files may be edited as necessary and professional measurement reports generated.
|
|
RogaANA; NVH Analysis Software - ROGA Instruments covers with it any NVH analysis requirements within one software package.
This unique software was developed especially for the needs of NVH engineers.
ROGA Instruments covers with it any NVH analysis requirements within one software package.
• Signal Analysis
• Order Analysis
• Modal Analysis
• Operation Deflection Shape Analysis
• Machinery Diagnostics
• Machinery Observation
• Balancing of Inelastic Rotors
• Human Vibration Measurement
• Acoustic Level/Power
• Acoustic Intensity
• Interior Noise Measurement
• Noise emitted by acc. Road Vehicles acc. ISO 362
• Acoustic Camera
|
|
Sartorius ProControl for Windows®
…modular scale-up system for recording, monitoring, evaluating and archiving all quantitative and qualitative product, process and environmental parameters.
• Average weight control | SPC | Attribute testing | HACCP
• Ranges from stand-alone to network systems
• Solutions for every requirement
• Optimal central computer and workstation ergonomics
• The most advanced software platform guarantees a future-proof investment
Contact us for a free trial version. |
|
With Q-DAS' popular procella SPC software, measurement and inspection data can be quickly acquired either by manual input or on-line, via the serial interface of the measuring device. On-line visualization of the acquired data enables timely detection of trends and out-of-control conditions.
The user is therefore in an excellent position to initiate timely corrective action. Data are checked against individually defined alarm thresholds (violation of tolerance or control limits) as soon as they are collected. If an alarm occurs, the operator is required to acknowledge the alarm. Actions taken, events and causes can be documented.
The user can be required to enter supplementary data (cavity, machine, batch, etc.), which allows for traceability throughout, and for object-related analysis of relevant information.
In advanced enterprise solutions, integration via an IDI interface connection with SAP/R3 QM makes it possible to load inspection lots generated by SAP into procella for data acquisition. Once the examination is completed, the acquired data are transferred back to SAP. In this way, users can benefit both from the flexibility of procella in terms of data acquisition and on-line visualization, and the advantages of a centralized umbrella system such as SAP. |
|
you can measure process quality in a quantitative way and establish the process capability of your manufacturing operations. This is a measure of the extent of the variation of a key feature of a product ie. weight, length, thickness and so on, compared with the specification limits. It tells you how well you can expect a machine or a plant to perform.
|
|
Wonderware's QI Analyst 8.0 real-time SPC software can give your production team the quality information they need to adjust process parameters on the fly, which can decrease costs and improve product quality. Traditional off-line SPC systems use historical process data and don%u2019t allow real-time corrections of process excursions.
QI Analyst software is an important part of Wonderware's software solutions for Production and Performance Management. Its comprehensive, real-time SPC monitoring keep Wonderware customers informed regarding developing product-quality problems. |
|
Easy… Intuitive…Powerful
Datapaq's software takes the data gathered by the data logger, quickly and easily interprets the information, and reports the analysis you need instantly. Wizards walk you through all the major software functions and simplify set-ups and analysis. All of the critical profile results are available on one easy-to-read screen.
For FREE software downloads, visit our website.
|
|
LumaSense Technologies has developed new Thermal Comfort Manager Software (INNOVA 7701) for the Thermal Comfort Data Logger (INNOVA 1221). If you already have an INNOVA 1221 and are interested in our new software, you can order it directly from our web site. Thermal Comfort Manager Software:
The INNOVA 7701 software is a complete redesign and is fully upgraded to the newest Microsoft.Net® technology based on a SQL Server 2005 database structure making it fully compatible with Microsoft Windows XP. This makes the solution both robust and agile, giving the user a much better tool for handling measurements and performing data processing. The demand for more efficient and operative measurements and quicker access to real-time data has increased tremendously. Moreover, to optimize and shorten time consuming processes, the need to after-process present and historical data is of the outmost importance to maintain flexibility – all of which is incorporated into the application. |
|
testXpert® II - Intelligent and Reliable
The New Software Generation for Materials Testing
Zwick Roell has set the standard with testXpert® for intelligent materials testing software. Unlike other software testXpert® has a standardized operating surface for all of its applications, no matter whether static or dynamic tests - so you spend less time learning to handle software and more time conducting tests. With testXpert® II you benefit from over 80 years of testing experience and from over 10,000 successful installations worldwide. |
|
ATEasy is a rapid application development framework for functional test, ATE, data acquisition, process control, and instrumentation systems. ATEasy provides all the necessary tools to develop and maintain software components, from instrument drivers to complex test programs. It is designed to support and simplifies ATE projects with long life cycles. With ATEasy, test applications are faster to generate and easier to maintain.
|
|
eZ-TOMAS
Machine Vibration Monitoring Software
for the 600 Series, WaveBook/516E,
and ZonicBook/618E
eZ-TOMAS is the economical solution to rotating machine monitoring and analysis. eZ-TOMAS will continuously monitor your machines. eZ-TOMAS records the change in vibration condition, and quickly provides you with the information you need to make critical decisions.
Key Highlights
• Transient and Steady State rotating machinery analysis
• Easy-to-use graphical user interface and multiple project configurations provide fast setup
• Up to 20 kHz Analysis Frequency, with up to 25,600 lines of resolution
• Field expandable from 8 to 56 channels
• Overall, spectral amplitude, and phase gauges with peak hold indicators
• Spectral limit checking, with output relays and alarm event logging
• Limit sets for specific RPM ranges
• Event data storage based on user defined triggers, with automatic backup
• Rotating Machinery Analysis: Time Waveform, Orbit, Spectrum, Waterfall, Polar, Bode, Shaft Center Line, and Trend displays
• Machine and Bearing Fault analysis and limit checking
• Save/Recall display setups with up to 8 display windows, and multiple overlays
• Integration and differentiation for acceleration, velocity, and displacement inputs
• Harmonic, Sideband, and Peak cursors for time waveform and spectrum displays
• Statistical analysis report with automatic limit generation
• Generate production test cell reports
• Export data to Excel®, UFF Type 58 Binary, or ASCII format
• Copy/Paste graphs and data into Microsoft® applications |
|
- Long-term software compatibility and flexibility with emerging technologies
- High-performance compiled execution
- Lower cost of ownership
- Strong integration of software and hardware
- Rapid application development
At National Instruments, we not only understand the importance of software, but we also believe software is the foundation of your measurement and control system. Using National Instruments software, including our flagship product, the LabVIEW graphical development environment, increases your productivity in creating test, measurement, and automation solutions through data acquisition, data analysis, and data visualization. Because our software architecture incorporates each of our products, you can use these products separately or together to build your measurement and control system. |
|
ImageController1 vision system
• 5 measuring results in seconds - independent from the operator
• Edge inspection for quality and wear checks
• Measuring programs for axial and radial runout
• More details (Link) http://ezset.info/index.php?id=88
|
|
Software »pilot 3.0«
Customized to meet your specific requirements
The »pilot 3.0« system of software modules, empowers you to select the optimum components and modules that will meet the specific requirements of your individual production processes. Therefore, »pilot 3.0« will remain streamlined and easy to operate and you will only need to invest in those functions that you really need, to achieve your specific application requirements.
»pilot 3.0« can be used from manual operations over automatic cutting edge recognition, up to 3-axes-CNC-controlled measuring operations. »pilot 3.0« is suitable for every application and especially recommended for automated manufacturing environments and/or a high number of tool changes. »pilot 3.0« is also used in tool inspection. |
|
|
|
Metrology and measurement software
