- Production Machines >
- Cutting Machine >
- Other cutting machines
Other cutting machines
Overall length: 2 m
Overall width: 1 m
Height: 2 m
Process An automated process to: • Straight cut by sonics • ± 45° cut • Program the cutting length and the quantities to be cut. Fabric spécifications • Any type of thermofusible fabrics Technical features • Output: 2,300 ...
Ultrasonic cut is the most effective way of making fast and smooth cuts in the food industry today. Ultrasonic cutting technology offers both an economical solution in the industry as well as an environmentalist technology. Because when ...
Width: 1,000, 1,200, 1,550 mm
Length: 2,000, 1,800 mm
SODIFA ESCA
Width: 1,500, 1,200 mm
Length: 3,000, 1,500, 2,500 mm
Sewing and cutting tables for designers and pattern makers Tables with 30 x 30 mm tubular steel frame Adjustable cylinders on each foot +/- 20 mm Anthracite gray lacquered finish on the frame 19 mm thick stratified plastic white ...
SODIFA ESCA
Width: 1,000 mm
Length: 1,200 mm
SODIFA ESCA
OPTIONS THE CTO CAN BE EQUIPPED WITH : Counterboring attachment Concentric clamping device OD ovality carriage Single point carriage ID and bevel TOOL HOLDER 45mm stroke Star wheel system Tool holders available: 70mm stroke 110mm stroke WEIGHT 78kg
COFIM SYSTEM
OPTIONS THE CTO CAN BE EQUIPPED WITH : Counterboring attachment Concentric clamping device OD ovality carriage Single point carriage ID and bevel TOOL HOLDER 45mm stroke Star wheel system Tool holders available: 70mm stroke 110mm ...
COFIM SYSTEM
OPTIONS THE CTO CAN BE EQUIPPED WITH : Counterboring attachment Concentric clamping device OD ovality carriage Single point carriage ID and bevel TOOL HOLDER 45mm stroke Star wheel system Tool holders available: 70mm stroke 110mm stroke WEIGHT 130kg
COFIM SYSTEM
•550 blade saw •Automatic double miter sawing machine with pneumatic turning -45º /90º/+45º •USB slot •MANUAL •SEMIAUTOMATIC cutting •AUTOMATIC cutting ( cut list) •STEP by STEP ( fully automatic piece cut) •Pneumatic vertical ...
• Ø 500 mm TCT blade included in the machine • Cutting at 90º • 4,0 HP Motor • 500 mm balscrew servomotor feeder • Unlimited strokes • 2x pneumatic vertical clamping cylinders • 2x pneumatic horizontal clamping cylinders • Twin ...
•450 mm diam TCT cutting blade included •Cutting angle capacity -45º / 90º / + 45º •1 programmable axis •Maximum programmable cutting length 9500 mm •Minimum cutting length 10mm •2x pneumatic horizontal pressers in cutting area with ...
Operating pressure: 6 bar - 8 bar
Overall width: 1,250 mm
Height: 1,500 mm
The CUTTING MACHINE GM300 is an electro-pneumatic CUTTER with blades arranged like a guillotine. The CUTTING MACHINE GM300 is an electro-pneumatic CUTTER with predetermination of the pieces and resolution of the measurements in millimeters. ...
GM AUTOMAZIONI
Maximum cutting height: 20 mm
Overall length: 500 mm
Overall width: 600 mm
The LARGE CUTTING MACHINE GM Z-250 is an automatic electric cutting machine with pre-determination of the pieces and resolution of the measurements in millimeters. The LARGE CUTTING MACHINE GM Z-250 is ideal for cutting to size tubes, ...
GM AUTOMAZIONI
Maximum cutting height: 20 mm
Overall width: 450 mm
Height: 270 mm
The CUTTING MACHINE SP101 WIDIA BLADE is a highly versatile machine and has been designed to meet production needs in many sectors. Using the keyboard of the CUTTING MACHINE SP101 WIDIA BLADE, it is possible to set and change the ...
GM AUTOMAZIONI
ALFI Technologies integrates serveral types of cutters,which enable to cover a large range of heavy clay products : bricks, tiles, blocks, paving stones… The large capacity cutter presented by ALFI Technologies achieved an exceptional ...
Force: 75 tf
Stroke: 1,200 mm
LINE FOR CUTTING DASH INNER AUTOMOTIVE INDUSTRY Arch frame press 75 tons Operations: Automatic alimentation Coating of the part under press Conformation in the tool Cut out primary – Piloting of cutting tools Evacuation ...
NUMALLIANCE
Force: 2,000 kN
Stroke: 1,200 mm
Working speed: 2 mm/s - 35 mm/s
CUTTING HYDRAULIC PRESS DOUBLE SYNCHRONIZED CYLINDERS Floor carpet automotive Operations: Cutting of big parts requires presses with wide tables and a specific design fitting ergonomics issues to handle them. Technical Tools ...
NUMALLIANCE
For cutting tubes with precision knives, cleanly and without damage to your parts. Main features From 0.47 to 4″ Cutting by knife Straight or angle cut Cutting before or after bending Easy integration in automated production ...
NUMALLIANCE
TECNIMETAL - TEKNIcut LSS is a sturdy light cutter for metallographic sectioning of metals, fibers, plastic, ceramic and mineral samples with various level of toughness. TEKNIcut LSS is suitable for cutting specimen of smaller workpiece ...
TECNIMETAL
Overall length: 810 mm
Overall width: 600 mm
Height: 810 mm
The precision metallographic cutting machine for cutting all kinds of materials with variable spindle speed. The automated Y-motion adds to the precision of the machine. Essential for cutting surface components, shelf and hard applications. ...
TECNIMETAL
Versatile manual cutting machine. The TECNICUT successfully combines the latest technologies with unprecedented flexibility and total freedom of use for the user. The TECNICUT is a powerful tabletop cutter, designed to use 250 and 300 ...
TECNIMETAL
Tube diameter: 12 mm - 24 mm
The Combined TP25/32 Evo is designed for cutting and bending iron bars up to a maximum of Ø 24 mm (0.94 inch) diameter - Ø 28 mm (1.10 inch) curve. This machine is available with Single-phase or Three-phase motor. Features: • High ...
Tube diameter: 14 mm - 28 mm
The Combined TP32/36 Evo is a full version of Cutting and Bending unit designed for maximum cutting Ø 28 mm (1.10 inch) - bending Ø 34 mm (1.34 inch). Features: • High functionality and efficient performance; • Designed for the ...
Tube diameter: 16 mm - 32 mm
The Combined TP40/46 Evo is a complete version of cutting and bending units designed for maximum cutting Ø 32 mm (1.26 inches) - bending Ø 38 mm (1.50 inch). Features: • High functionality and efficient performance; • Designed ...
THE NEW ENDLESS BANDKNIFE CONTOUR CUTTING MACHINE, JUST DON’T CALL IT SIMPLY “EVOLUTION” The endless band knife automatic contour cutting machine SLC EV has been designed to meet high productivity and versatility requirements. The ...
RAM Elettronica
The endless band knife automatic contour cutting machine SLC SF has been designed to provide users with simplicity and easiness of use in a solid product. A powered turntable and a precise clamp device allow a cross contouring operation ...
RAM Elettronica
The oscillating blade automatic contour cutting machine SPL EV has been designed to answer at uncompromisingly versatility and accuracy demands. Thanks to the refined reciprocating mechanism, this machine can process an extended range ...
RAM Elettronica
The M700 Modular Series is a brand new concept in wire and tube processing. With the modular design, you can quickly switch between wire, small tube and large tube processing. The M700 Modular Series is a compact table top system designed ...
The Eraser Company
Tube diameter: 1 in
Description / Details Eraser’s Model HCA20 Wire & Cable Cutter is an ideal unit to quickly shear wire, cable or tubing up to 1.25" (31.75mmø) in diameter. The unit utilizes dual electrical finger switches to activate the blade via an ...
The Eraser Company
Tube diameter: 1 cm - 3 cm
Cutting speed: 4.8 in/s - 35.7 in/s
Eraser’s fully automated Model WC601D Rotary Blade Tubing Cutter is perfect for processing flexible tubing to tight specifications such as those required for medical applications. Model WC601D is capable of processing materials such as ...
The Eraser Company
Force: 490 N
Opening: 155 mm
Stroke: 90, 28 mm
Available with manual, pneumatic or hydropneumatic control in a range of sizes suitable for riveting, trimming, drawing, keying, sizing, straightening, bending, die-cutting. Suitable whenever adjustable thrust and accurate stroke control ...
SOMAUT S.r.l.
Force: 1,470.9 N
Opening: 450 mm
Stroke: 63, 100, 160 mm
Available with manual, pneumatic or hydropneumatic control in a range of sizes suitable for riveting, trimming, drawing, keying, sizing, straightening, bending, die-cutting. Suitable whenever adjustable thrust and accurate stroke control ...
SOMAUT S.r.l.
Force: 3.9 kN
Opening: 580 mm
Stroke: 70 mm
Available with manual, pneumatic or hydropneumatic control in a range of sizes suitable for riveting, trimming, drawing, keying, sizing, straightening, bending, die-cutting. Suitable whenever adjustable thrust and accurate stroke control ...
SOMAUT S.r.l.
XBM-I Plastic Film Cutting Machine Overview It is mainly used to make strips of bidirectional tensile film(BOPP、BOPC、BOPET、BOPA), unidirectional tensile film and composite membrane. Standard GB/T1040.3-2006, ISO527-3:1995 and the equivalent. ...
X travel: 45 mm
Y travel: 80 mm
YVROUD offers a wide range of guillotine cutters, with different capacities. Many variants and adaptations are available depending on the intended application: • Motorised mobile cutters. • Cutter with built-in puller. • Chisel ...
YVROUD
X travel: 65 mm
Y travel: 80 mm
YVROUD offers a wide range of guillotine cutters, with different capacities. Many variants and adaptations are available depending on the intended application: • Motorised mobile cutters. • Cutter with built-in puller. • Chisel ...
YVROUD
X travel: 80 mm
Y travel: 300 mm
YVROUD offers a wide range of guillotine cutters, with different capacities. Many variants and adaptations are available depending on the intended application: • Motorised mobile cutters. • Cutter with built-in puller. • Chisel ...
YVROUD
Speed: 180,000 mm/min
StarCut 520 The most important The electronic gear allows cutting any size and adapts to the register mark by the tactile touch screen. The speed is taken from the host system by an encoder or dancer. It can be moved from one machine ...
Speed: 180,000 mm/min
Cutter 520-S1 The most important The electronic gear allows cutting any size and adapts to the register mark by the tactile touch screen. The speed is taken from the host system by an encoder or dancer. It can be moved from one ...
Labeltech Eiger 350/450 LABELTECH offers an highly flexible machine to die cut plain and printed labels. MAIN FEATURES: • Servo drive motorizations on nip roll, die cut and matrix rewinder for: • - the best synchronization between ...
X travel: 50 mm
Y travel: 200 mm
Z travel: 50 mm
GTQ-5000A cutting machine is suitable for metal, electronic components, crystal, hard alloy, rock, ore, concrete, organic material, biological material(tooth, bone)and other materials. The equipment set high precision location and have ...
Laizhou Weiyi Experiment Machine Manufacturing Co., Ltd.
X travel: 40 mm
Maximum cutting height: 20 mm
Laser power: 120 W
The machine is composed of fuselage, control panel, protective cover of cutting room, motor, transverse feed mechanism, loading lever mechanism, cooling system, diamond cutting piece and other components. It can not only cut circular ...
Laizhou Weiyi Experiment Machine Manufacturing Co., Ltd.
Tube diameter: 110 mm
Weight: 400 kg
LDQ-350 Manual cutting machine is designed and manufactured according to the European health and safty standards. The series of machines consist of controing system,cutting systems,lighting system,cooling system and cleaning system.Super ...
Laizhou Weiyi Experiment Machine Manufacturing Co., Ltd.
X travel: 1,500 mm - 7,500 mm
Y travel: 1,000 mm - 3,200 mm
Z travel: 50 mm
As an all-round talent, the cut expert ecocam 2 is suitable for every material and every production step with the right tool. Thus enabling a high degree of flexibility. Whether single or multilayer - thanks to the variable calibration ...
Height: 58 cm
Weight: 28 kg
Carbide blade cutting-off machine rapid and burr-free cutting of metal profiles without material heating and coolant Progressive start of the motor Rapid clamping vice Tilting vice jaws from 0 to 45° to the left and the right Depth stop 7-position ...
SIDAMO
Height: 64 cm
Weight: 22 kg
Abrasive disk cut-off machine. Dry additional cutting-off of ferrous metals for works Rapid clamping vice Mobile blade housing with automatic closing Tilting vice jaws from 0 to 45ø to the left and the right Shaft blocking pin for to ...
SIDAMO
Overall length: 94 cm
Height: 157 cm
Weight: 130 kg
"45ø tilting head to the left and the right Rapid clamping vice. Burr-free double vice Mobile jaw to perform right 45° cut Protective cover of detachable saw mill Lubrication system of saw mill using a pump Drive through an oil-bath ...
SIDAMO
This bean cutter is designed for cutting whole green beans. The model 11 is equipped with an axis with round blade and is used for longitudinal cuts. The model 11A is provided with a cleaver-axis and is suitable for horizontal cutting. ...
Herbort
The cutting machine 122W is most suited for cutting the complete range of root vegetables, e.g. potatoes, carrots, beetroot, celery, also cucumbers, apples, onions, spring cabbage and other fruits into slices, strips or dices. The ...
Herbort
The new cutting machine of the 26-line was designed to cut potatoes and similar products into wedges. The product enters the machine via the movable feeding hopper. The V-shaped conveyor belts transport it towards the cutting part of ...
Herbort
Tube diameter: 10 mm
Overall length: 36 cm
Overall width: 20 cm
Pneumatic Semi-automatic diptube cutting machine SPEEDCUT 21 is an irreplaceable tool for cutting any diptube thanks to its simple mechanism and cost efficiency. By inserting the tube into a custom made hole and applying a slight pressure, ...
Cutting speed: 0.914 m/s
The 450 A is an automatic cutting machine for hydraulic hoses, manufactured by Marken Manufacturing. This product can operate with a maximum feed rate of 180FPM, and can accomplish 200cuts/hr. It has an accuracy ranging from 0.1% to 0.3% ...
Marken Manufacturing
Cutting speed: 0.813 m/s
Marken 500 A Automatic Guillotine Cutter -Will cut 1/16" up to 2" OD Non-wire reinforced hose and tubing -Consistent cutting of length -Fully automatic -Heavy duty -Fast -Minimum maintenance -Easy operation -Direct take-up from most ...
Marken Manufacturing
Cutting speed: 0.914 m/s
The 475 A is an automatic cutting machine for hydraulic hose, manufactured by Marken Manufacturing. This product can operate with a maximum rate of feed 180FPM and can produce 2000cuts/hr. It has an accuracy ranging from 0.1% to 0.3% ...
Marken Manufacturing
•Robust mechanical design suitable for high speed operations. •Maximum performance with high quality materials used on production. •High capacity thanks to independent operation of processing, cutting and screwing units. •FA 1030 processing, ...
KABAN MAKINA SANAYI VE TIC. LTD. STI
•Robust mechanical design suitable for high speed operations. •Maximum performance with high quality materials used on production. •High capacity thanks to independent operation of processing, cutting and screwing units. •FA 1030 processing, ...
KABAN MAKINA SANAYI VE TIC. LTD. STI
General Property o - It performs the milling and cutting operations of the profiles. o - There is a SERVO motor-controlled processing unit that allows all desired operations on the part. o - Stress relieving method has been applied ...
KABAN MAKINA SANAYI VE TIC. LTD. STI
Force: 996.4, 1,494.6, 498.2, 797.1 kN
Opening: 250 mm
Specifically designed to perform work involving deep-drawing, stamping, die-cutting, forming. It consists of an electro welded structure made solely of S355JR steel. They are stabilised and machined at the end of the structural welding ...
HIDROGARNE
Force: 498.2, 797.1, 996.4, 1,494.6 kN
Opening: 250 mm
Specifically designed to perform work involving deep-drawing, stamping, die-cutting, forming. It consists of an electro welded structure made solely of S355JR steel. They are stabilised and machined at the end of the structural welding ...
HIDROGARNE
Force: 797.1, 996.4, 1,494.6 kN
Opening: 450 mm
Specifically designed to perform work involving deep-drawing, stamping, die-cutting, forming for medium and high volumes. It consists of an electro welded structure made solely of S355JR steel. They are stabilised and machined at the ...
HIDROGARNE
Uniform nishing Does not cut into the material Biocompatibility Safe deburring High-tech ceramic Wide knife-edge Ergonomic handle
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining