|
|
RC Series [RoHS Compliant]
For noise suppression on signal line.
|
|
| All the advantages of IEC connector, EMI filter, fuses, switch and voltage selector combined in a powerful compact all-in-one solution. Ideal for computers, monitors and office equipment like printers and copy machines. |
|
- Compact state of the art filter concept
- Light weight plastic enclosure design
- Minimized filter leakage current
- Hinged safety covers
- Revolutionary embedded filter terminals
- Chassis (FN 3025) or DIN-rail (FN 3026) mounting option
- Selectable performance level
- Environmental friendly design without potting compound
|
|
| Spectrum Control's low pass product offers the largest selection of resin and hermetically sealed filters. Resin sealed filters offer a wide variety of packages to accommodate your size and mounting requirements. Miniature solder-in (low profile) filters are constructed with a discoidal and are glass sealed on one end to provide a compact, low cost Pi or C filter that can be soldered into a bulkhead. High current/high voltage bolt-in filters featuring current ratings up to 100 ADC or rated voltages up to 1250 VDC. Glass seal filters are used where a rugged, hermetically sealed filter is required. They consist of discoidal capacitors with or without ferrite sleeves or wound inductors in 1/4-28 or 5/16-24 threaded cases. Through the use of discoidal capacitors and wound inductors, high capacitance and inductance values can be achieved. Hermetically sealed filters provide very high EMI filtering performance. |
|
| The Miniature Solder-in Filters and Spec Mini-Press 9000 Series provide various microwave and RF applications such as attenuators and oscillators, and the Spec Spin Filters are ideal microwave applications for commercial and hi-reliability applications. |
|
| LCR Electronics designs, develops and manufacturers a complete range of Aerospace / Military EMI Filters (RFI Filters, EMC Filters) to help its customers meet MIL-STD-461 (MIL-461), RTCA-DO160 and others EMC requirements. These include standard off-the-shelf EMI filters as well as project-specific, specification driven and build-to-print Military EMI filters and suppression components. |
|
Features:
· Custom filters for motors, generators, power supplies, signal lines, engine management,
radar, TEMPEST & EMP applications
· MPE custom filters are already widely used in vehicles, ships, submarines, aircraft,
missiles, shelters, and communications buildings
· Tailored performance, packaging, mounting, and terminations
· Cost - effective
· Rapid prototyping service
· Fully resin encapsulated filters to meet severe environmental conditions
· Can be supplied with cables, military connectors, screened leads etc to simplify installation |
|
| Very compact EMI suppression components can directly be mounted on printed circuit boards of low-power office, medical, telecom and IT equipment, DC/DC converters and power supplies etc. Ideal low cost solution for manufacturers who have planned for EMC compliance throughout the equipment design process already. |
|
Features:
· 40 page catalogue
· 12 separate ranges
· Insertion loss performance of 100dB from 10kHz - 10GHz at full load
· 5A - 2400A, single & three phase ac
· 5A - 400A dc
· 400Hz range
· Proprietary low-leakage designs
· Special MPE design ensures high performance, with low heat dissipation and small physical size
· Full performance under all load conditions
· Non - 50 ohm applications
· Full custom design capability
· Customisation service for standard products
· Shielded room, computer suite, TEMPEST, EMP protection applications
· Test-house verified 40GHz capability, and 100GHz performance demonstrated on-site |
|
Curtis Industries, the leading manufacturer of superior quality electronic and electrical components and assemblies for more that 75 years, offers a complete line of RFI power line filters designed to make equipment meet FCC/VDE requirements on conducted EMI.
Radio frequency interference (RFI) is unwanted noise generated by a wide variety of electronic and electrical devices. Governments of most industrial countries, including the United States, Canada and many European nations, have enacted guidelines on emitted RFI. Most notable are FCC docket 20780 in the United States and VDE (Verband Deutscher Electrotechniker) 0871 and 0875 in Germany. Computing devices, industrial controls, medial instrumentation, electronic games, and other electronic devices that generate unwanted radio frequency energy greater than 10 kHz must comply with these governmental and safety agency requirements |
|
Single-Phase EMI/EMC Filter
Single-phase filters for chassis or DIN-rail mounting are key for EMC compliance of higher power office equipment and low to medium power industrial applications. A broad selection of electrical and mechanical features allows a specific choice and deployment for countless applications. |
|
| Our complete family of surface mount EMI filters including surface mount inductors, low pass filters, high frequency filters and power filters is designed to offer high performance EMI filtering with a minimal PCB footprint. These filters are available in feed-thru and Pi circuit configurations. Tape and reel packaging is available to enable pick and place equipment installation of this product, saving time and cost compared to thru-hole filters. Spectrum Control surface mount EMI filters are ideal for a wide range of PCB applications, including automotive electronics, digital AV equipment, computers, peripherals, telecommunications, switching power supplies and high current buss lines. |
|
Three-phase and neutral line filters are a compact solution for the interference suppression on the mains input of cabinets and control units of equipment, ranging from industrial applications like machine tools to sensitive medical installations. These typically involve separate and often
insufficiently filtered frequency inverters and SMPS, causing current imbalance and significant interference problems. As individual elements they may be interference-suppressed already. The conjunction of several switching components in the same cabinet and a non-EMC conscious cabling will rise the demand for an additional EMC filter on the mains input of the whole installation. Many times this is the only way to get the CE mark for the cabinet in accordance with the EMC directive. |
|
| EMC filter solutions for industrial applications like motor drives and machine tools. Furthermore, these types of filters are also suitable for mainframe computer systems, large uninterruptible power supplies, medical equipment, wind turbine power stations and a vast array of other threephase power electronics. |
|
| LCR's 3 Phase EMI filters (RFI filters, EMC filters) are typically used in Power Electronic products. These EMI filters attenuate mains-borne EMI generated back into the power line. LCR's 3 phase EMI filters also protect sensitive electronics and make them less susceptible to surges, Electrostatic Discharge (ESD) and other harmful voltage and current surges. Typical applications for these EMI filters (RFI filters, EMC filters) are in three-phase industrial drives, controllers, frequency converters and industrial machine tools. |
|
Delta Configuration
- Single Stage, High Performance: 25A to 500A
- Single Stage. Compact, Low Height: 6A to 60A
- Single Stage, Ultra Compact: 6A to 20A
- Dual Stage, High Performance: 15A to 300A
- Dual Stage, High Performance: 15A to 300A
- Dual Stage, Bookshelf Design: 7A to 250A
- Single Stage, Bookshelf Design: 7A to 180A
- Single Stage, Compact: 20A to 100A
- Single Stage, Compact: 20A to 60A
WYE Configuration
- Single Stage + N, High Performance: 15A to 300A
- Single Stage + N, Compact, Low Height: 6A to 40A
- Single Stage + N, Ultra Compact: 6A to 20A
- Single Stage + N, Ultra Compact, High Perf: 6A to 20A
- Single Stage + N, Compact: 8A to 160A
- Dual Stage + N, High Performance: 15A to 300A
- Dual Stage + N, High Performance: 15A to 300A
|
|
| ... products without technical information |
| |
|
|
EMI filters
