|
|
Burgmann Automotive is a supplier and partner in the development of professional seals and decouplers for automotive exhaust systems. Different solutions are offered according to the specific requirements of a particular application, with a distinction made between static and dynamic exhaust applications.
High Temperature Seals
Burex® Decoupler
Supplier of mechanical seals
Visual Tour
Product Index
|
|
Professional scraper strip
Dual component with hard backing.
Replaces fixing rail.
Product no. 70075070
Each length m 50
Pack. Bundle
Width x Height mm 13 x 14 |
|
The packed gland is an exceptionally reliable fluid sealing device that is simple to install and maintain. Not only is it highly versatile, but also remarkably cost effective in both plant downtime and materials - especially when compared to complex alternatives.
Our constant advances in materials and lubricants, product design and manufacturing techniques, keep us at the forefront of compression packing technology. We therefore bring you one of the widest ranges of packings to match the temperatures, pressures and speeds of your most modern fluid handling lines, and economical packings for your older plant. |
|
Packing made of continuous 100% aramid fibres. Each single professional yarn is impregnated with PTFE using our exclusive "Filcoat"-process, then re-impregnated with a mix of PTFE and inert food-quality lubricant during plaiting operation.
Pumps, rotary movements.
Chemical, petrochemical, pharmaceutical, food and sugar industries, pulp and paper mills, power stations. |
|
John Industrial crane Packings are designed, engineered and constructed for specific services and applications. This is your assurance that John Crane Packings will provide the best sealing with the least amount of maintenance and adjustment.
All John Crane mechancial packings are made of asbestos free materials. These asbestos free packings can be substituted without any difficulty for asbestos packings in present use.
They can be interchanged with most asbestos products, and in many cases will give better, more dependable performance.
Braided Acrylic Packings
JC Style 1335
Braided PTFE/Modified PTFE Packings
JC Style C1045
JC Style C1056 (FDA)
JC Style C1065
JC Style C1070
JC Style 1993
Braided Carbon and Industrial graphite Packings
JC Style 774
JC Style G58
JC Style G57
|
|
| Compression professional profile that professional seals the joints against wetness and dirt through its pre-tension. V-shaped incision on the surface dictates clearly the folding direction, which creates a clean, harmonic impression over the entire length. |
|
Joint strip
Joint strip is used in expansion joints in accordance
with the materials description in Swedish professional building
regulations Hus AMA 72. It is also used to provide
wind-proofing and a vapour professional barrier.
• EPDM cellular rubber with its established benefits,
i.e. ease of use, resistance to ageing, sealing
ability, etc.
• Does not produce toxic fumes in the event of fire.
• Hollow, soft and elastic – accommodates
movements in joint.
• Made from black EPDM cellular rubber. |
|
| CoorsTek offers a wide variety of long-life, heat-stable, and corrosion-resistant ceramic hard-face professional seals using high-grade aluminas, silicon carbide, tungsten carbide, carbon graphite, and specialty polymers. |
|
Alumina ceramics:
AI2O3-99% AI2O3-97%
Purigy--------------------% „99.5 „97.0
Density-------------------g/cm3 3.89 3.71
Hardness Vickers1kg-------Kg/mm2 2000 1900
Modulus of Elasticity-----GPa 330 280
Fracture toughness--------Mpa*m1/2 3.8 3.5
Flexural Strength (MOR)---MPa 330 320
Compressive Srrength------MPa 2600 2300
Thermal Expansion (CTE)---10-6/K 8.2 8.0
Thermal conductivity------W/(m.K) 30.0 26.0 |
|
Composite gaskets :
MS Type
Composite Gasket
Strips
Gasket
PICSEAL
Composite gasket
GTMC 21
|
|
Over past years Trelleborg Bakker specialists have cooperated closely with the users of industrial rubber seals to design and produce high quality systems that would meet the client's most stringent requirements. Based on technical know-how, and supported by tests when necessary, Trelleborg Bakker has solved complicated sealing problems and many of these solutions are now available as standard professional seals.
The sealing pressure is achieved by compression of the rubber seals by an external force.
|
|
A major strength of James Walker Group companies is their ability and willingness to design, develop and manufacture customised products for all sectors of industry.
We have vast experience of solving customers' individual problems, and possess the technological expertise along with the flexible professional production facilities required to ensure that a customised product will meet your exact operational specifications. |
|
Orobica Plast-Gom also produces gaskets and technical items for motor, alimentary, bottling, pharmaceutical, building, electric, cardboard industry to satisfy customer's demands.
|
|
- Cutting of all professional adhesive and non-adhesive materials, joints, strips, formats
- Fabrication according to plans
- Moulding of all parts, compression, injection, transfer |
|
BÜLTE PLASTICS can custom cut your parts from a wide variety of materials including an extensive choice of elastomers, synthetic materials and others, using high pressure water jet cutting technology.
Water at a pressure of 3,000 to 4,000 bar is pumped through a 0.2 mm diameter nozzle manufacturers.
This powerful jet ensures a perfect cut with no rough edges and avoids any deformation of the parts.
The thickness of the professional seals available varies from 0.01 mm (Hostaphan transparent) to 60 mm (yellow cellular VULKOLLAN and black Epoxy Rubber Cellular).
The different levels of resistance to heat, alkalis, acids, weather, ozone, oil or fuel which distinguish each type of material will influence your choice.
We will be able to fulfill your requirements so please do not hesitate to consult us.
For free brochure, material samples or a quotation, contact us at the address below:
|
|
Obvious advantages of the TwinTec
Professional foam L 3000 you should consider
thoroughly:
● achieve more goals with one
gasket thanks to a triple material
compound design
● improved tolerance compensation
by enlarged head width
● optimized recovery performance
● perceptible snugly closure and
soft, smooth closing force
● optimized u-value performance
● universal professional feet professional fitting groove
widths of 4 to 5 mm
● special gasket lip design for continuous
sealing edge applications
● gasket corners can be either
mitered or welded
● recyclable without any problems |
|
Extruded and jointed "O" rings are our preferred method of production, but moulded versions are available if specifically requested.
Both silicone & fluorosilicone with all varieties of fillers are available for the manufacture of "O" rings.
The advantages of vulcanised "O" rings are:
- Cost Effective
- No tooling costs
- Reduced lead times
- Better surface finish (zero flash)
- Allows hollow sections to be used for lower compression force
-Custom lengths easily produced (up to approx 2m developed length) |
|
aumina glass Carbon
18% 25% 25%
Density-------------------g/cm3 2.08 2.20 2.16 2.08
Water Absorbtion----------%(24h) ƒ0.01 0.02 0.02 0.05
Hardness------------------Shore D D50 D68 D60 D62
Tensile Strength----------MPa 26.5 13.8 14.3 12.9
Flexural Modulus----------MPa 490 1310 1292 1088
Flexural Strength (MOR)---MPa 19.7 18.9 13.2 15.6
Compressive Strength------MPa 23.8 12.8 6.9 11.6
Thermal Expansion (CTE)---10-6/K 135 92 115 108
Max. Operating Temp-------Ž 260 260 260 26025% |
|
Cocks and jointsInfo-Catalogue
Control and regulation of liquid.
Orobica Plast-Gom produces gaskets for butterfly valves, joints according to DIN - ISO - CLAMP SUPPLIER - S.M.S. - BS - IDF standards for alimentary, pharmaceutical and chemical industries.
|
|
| Essential part of which depends the perfect running and security of entire plants, the sealing device must be definited since the products studying process, and taking into account all conditions of use ; but nevertheless, some sealing problems can arise in duty. That is the reason why Jicey conceives, designs and makes at your demands the flat stactic sealing devices that you need, around its basic technologies: industrial lamination and the carving of thin and ultrathin materials, but also in all materials and all shapes according to your plans. |
|
Trelleborg Glazing strip is designed for factory glazing
in machined grooves. The glazing strip is fitted with a
cord that makes it particularly suitable for mechanical
professional fitting, since the cord prevents the strip from stretching
in its longitudinal direction.
Manufactured from solid black EPDM rubber. For
use in accordance with MTK fitting instructions. |
|
James Walker manufactures and supplies complete ranges of metallic and semi-metallic joints, gaskets and sheet jointings to suit every industrial application.
In addition, we produce precision-cut flat gaskets to any shape, size and quantity from any sheet material, including our own extensive ranges of jointings. A vast stock of flange gaskets is held ready for immediate despatch, and we can economically cut non-standard professional profiles of any complexity within minutes. |
|
| Kemtron offers a wide range of products designed for all areas of sealing. We are able to offer materials that have wide temperature ratings, long operational life, IP sealing, resistance to fluids and NBC chemicals, UL94 listings for fire retardancy, low toxicity products etc, many available from stock. |
|
|
|
Static sealing
