|
|
Camfil Farr standard-capacity absolute® filters are manufactured from the highest quality components, under demanding quality control conditions, and they are certified to ensure performance in the most critical of applications. We also offers absolute filters for applications with operating temperatures approaching 400° C.
Every Camfil Farr absolute® filter is individually scanned and tested per IEST Recommended Practice IEST-RP-CC001 (Type A, C or D). Each unit is labeled noting tested efficiency, pressure drop, rated and performing airflow, and a unique serial number for unit tracking and quality assurance.
|
|
Description
Effective separation of superfine dust and oil particles smaller than 1 pm. This filter complies with the required permissible maximum dust transmittance level of 0.5 % of the EUREVEN® filter class and is therefore classified into the BIA category M. We will send you a copy of the BIA test certificate on request. In terms of common filter classifications, the EUREVEN® filter satisfies the requirements of filter class F9. This means that this filter can replace in many cases high-performance bag filters of class
|
|
Odour-filtration for supply and exhaust air in domestic and technical applications.
To be used for in air conditioning plants for the removal of smells and odours in public buildings, airports, offices and industrial premises.
Activated carbon filter with base plate and cylinders made of galvanised or stainless steel
- Cylinder filled with activated carbon granulate
- Exchangeable cartridges can be regenerated
- Simple replacement thanks to bayonet coupling
- Plates are also available with 4, 6 or 8 hole configurations, depending on your specific needs.
|
|
|
Filter systems especially made for the laser industry. Suction systems for laser jobs with i.e.metal, wood, plexiglas and gum (cutting, welding, marking etc.)
|
|
|
ACS carbon filters are used to adsorb gaseous odours and impurities from the air stream and are available pre-assembled as either cartridge filters or panel filters or alternatively supplied in loose bulk form as well as carbon coated foams and synthetic media. The cartridge shown here is particularly abrasion resistant whilst offering low air resistance. Along with standard grade carbon a comprehensive range of impregnated carbons is available in various particle sizes. For the more demanding of applications the range is completed by chemical adsorption and oxidation filters incorporating specially designed granules.
|
|
PROTECT VENTSORB® 60
The PROTECT VENTSORB® 60 is simple activated carbon adsorber designed for treatment of air and gases for a range of applications.
The PROTECT VENTSORB® 60 is effective at purifying air streams with relatively low concentrations of Volatile Organic Carbons (VOCs) as well as odour forming and corrosive compounds.
The unit is preloaded with activated carbon for the specific application and is ready for immediate connection and start up.
|
|
Honeycomb activated carbon filter mesh is made by loading activated carbon on polyurethane materials,which has carbon content of about 35-50% and excellent adsorption functions. It can be used for air purification such as getting rid of volatile organic compounds, dust in the air, smoke, adors and pollutants such as toluene , and formaldehyde. It is mainly used for air cleaner, air condition and etc. It is easy to be made into any shape ,has low resistance of airflow and pressure falloff.
Material characteristic:
Width: 3-20mm
Pore Size: small middle large
Benzene Adsorption Capacity: 25-32%
Gas Resistance: 1.0m/Sec
Pressure Falloff:4mm:42Pa
20mm:98Pa
|
|
Applications
Clean room technology
Production facilities, air-conditioning and ventilation technology
Consumer products and electronic devices
(e.g. cooker hoods, vacuum cleaners, mobile room air systems, laser copiers, laser printers)
Advantages
Clean room technology:
Reducing the number of rejected parts
Lowering production costs
Increase process reliability
Improving product quality
Avoiding corrosion
|
|
SAAFCarb enhanced capacity media efficiently removes 99.5% of targeted contaminants from SAAFCarb systems. Target impurities include diesel fumes (nitrogen dioxide), hydrocarbons, chlorine, and volatile organic compounds (VOC). The pelletized activated carbon is composed of non-toxic, bituminous coal substrate. SAAFCarb media removes toxic and impure gases from the environment by adsorption. In this process, the gases accumulate on the surface of the pellet.
The 4.0 mm pellet media undergoes several quality control tests before being shipped, revealing low pressure drop and high adsorptive capacity. SAAFCarb media performs at a range of -4° to 125°F (-20° to 51°C) under 10- 95% relative humidity (RH). Airflow is effective in commercial and industrial systems, and ranges from less than 25 CFM (42.5 m3/hr) to over 100,000 CFM (169,920 m3/hr) and with velocities from 60 to 500 FPM (1,080 to 9,000 m/hr).
|
|
More than 150 types of carbon for all your applications:
•Granular activated carbon
•Extruded or Pelletised Activated Carbons
•Powdered Activated Carbons
•Acid Washed and High Purity Activated Carbons
•Specialist Impregnated carbons
•Production capacity of more than 85,000 metric tons per year
•Can supply carbon anywhere in the world!
|
|
The PROTECT VENTSORBs® are a range of activated carbon adsorbers designed for treatment of air and gases for a range of applications. They can be delivered as standard or regenerable option – For CENTAUR®.
The PROTECT VENTSORBs® are effective at purifying air streams with relatively low concentrations of Volatile Organic Carbons (VOCs) as well as odour forming and corrosive compounds.
The air or gas flows through the unit in an upflow direction and the unit is normally utilised as the end of pipe. The outlet should be monitored periodically to check the activated carbon is achieving the treatment objective. For larger flows or duties, a number of units can be used in parallel.
|
|
Activated carbon filtration :
To elîminate odours and VOC. The filter cells can be regenerated simply by repladng the carbon.
|
|
OdorBan Carbon Pleated Panel Filters
For odor and fume control our "OdorBan" products are an efficient and economical solution. "OdorBan" pleated panel filters fit existing filter housings thus eliminating the need for costly equipment changes. "OdorBan" pleated panel filters add to the benefits of "OdorBan" pad/roll media by increasing surface area for extended service life, lower pressure drop and even greater removal efficiency. OdorBan filters are now rated MERV 8 per AHSRAE 52.2.
OdorBan Bulk Rolls and Inserts
For odor and fume control our "OdorBan" products are an efficient and economical solution. "OdorBan" pads and rolls are polyester filter material with carbon bonded to every fiber. Even distribution of small carbon particles insures good removal efficiency of odors and fumes. "OdorBan" pads and rolls fit existing filter housings thus eliminating the need for costly equipment changes.
|
|
|
|
|
|
In addition to standard air cleaners with or without cyclone separators, MAHLE also provides customer-specific air filter elements and air filter housings for passenger cars and commercial vehicles. Air filter elements of various types are used for filtering the intake air. Metal-free filter cartridges with efficient filter media and high dust holding capacity guarantee dust efficiency of up to 99.9 percent. Although cellulose media have predominantly been used for filtration in the past, MAHLE has meanwhile introduced new developments aimed at achieving higher efficiency and dust holding capacities. To this end, multi-layer filter materials made from cellulose, meltblown and nanofibers as well as completely synthetic non-woven materials have already been optimized for mass production.
New developments - air cleaners with activated carbon adsorbers
Owing to the statutory requirements of the North American market, HC adsorbers in the air intake are necessary for reducing emissions. In response to this, MAHLE has integrated an activated carbon element in its air cleaner modules. Hydrocarbons are therefore adsorbed which can then escape via the intake system when the engine is switched off.
|
|
Motors Filters and Spare Parts
We offer filters for most collection systems. Please contact factory directly for your special filter needs.
|
|
|
|
|
|
Advanced Production methods often require very clean air, and in many cases these requirements are certain to increase. For example, the electronics industry needs a very clean manufacturing environment for its VLSI circuit production (VLSI - Very Large Scale Integrated). The pattern width on the circuits may be 1 micrometer or less. There will be a need to control particle contamination down 1/10 of third dimension (0.1 micrometer).
The "heart" of the clean room is the filter, but there are various considerations regarding room classification, choice of filter, and how filters influence the environment.
Camfil Farr is recognized as the leading supplier of high efficiency filtration products for the microelectronics industry. HEPA/ULPA filters are produced within controlled environments in our ISO 9000-certified plants. We can produce the same type of filters at multiple manufacturing sites. Our large production capacity ensures the availability of our products at all times throughout the world.
|
|
Coarse / Pre Filters
Coars / Pre Filters are primary stage of filters used to arrest large dust particles of size down to 10 micron and to filters lints,soot,plant pollen,insects and dust from atmospheric air,Thease filters are classified under DIN EN 779 / ASHRAE 52.2-1999.These filters are used in virtually any air handling applications.
Better filteration is the first step in improving indoor Air Quality. Pleated panel filters outperform ordinary furnace filters with higher efficiency and lower pressure drop allowing air-handling systems
to stay cleaner and more efficiently
|
|
|
Many allergists recommend high performance electrostatic air filters like the Dust Fighter 90 to reduce patient's exposure to airborne irritants. Breathing clean air can be a significant factor in a patient's well-being. By trapping dusts, pollens, molds, and animal dander as air circulates through the filter, the Dust Fighter 90 electrostatic air filter helps reduce your exposure to these symptom-causing allergens. This often means you breathe easier and have fewer symptoms.
|
|
Sécur' Air - Box carry-filter of safety
3 dimensions of box for filters of standardized size: 3.6.2, 6.6.1 and 6.6.2.
Type of filters which can be used (to be ordered in addition):
. High effectiveness (F7 and F9): FR MP GD in 3.6.2 and 6.6.1 and 6.6.2.
. Activated carbon: FR CO in 3.6.2 and 6.6.2.
To use when it is imperative that the operator or the environment is not in contact with the compounds contaminents (particles or molecules) which are on the filter or in the box.
Air extracted in microbiological laboratory of safety (P3 or P4), drug company or chemical.
|
|
PTM sterilizing grade cartridge filters are manufactured for the specific needs of the pharmaceutical industry. Manufactured with inherently hydrophobic PTFE membrane, these cartridges are designed for use in the filtration of aggressive solvents, and as compressed gas and vent filters. Each cartridge module is individually bubble point tested using 60/40 IPA and water before it is released from manufacture. The cartridge surface area, filter core design, pleat configuration and pleat packing density have been optimized to provide increased cartridge life resulting in lower filtration operating costs. Rugged construction ensures repeatable steaming and testing. PTM grade cartridges are 100% integrity tested.
|
|
|
|
|
|
The filter elements, including sintered metal powder filters, sintered metal fiber filters, titanium filters and other alloyed filters, are manufactured by isostatic pressing or co-axial pressing via powder metallurgy process. Available materials are: stainless steel 316L, 304L, 904, Titanium, Inconel, Hastelloy, Nickel, Monel and other alloys .etc.on request.
The pore size can be adjusted by suitable selection of the powder size fraction and the process parameters. It has the type of tube, disc and stack of lamination and so on.
Main Applications
1. Gas and liquid filtration
2.Solid catalyst recovery
3.Filtration of slurry oil and other petrochemical products
4.High-temperature gas filtration
5.Fluidization
6.Powder conveying
7.Aeration, and other applications in various industrial fields.
Main advantages
1. Good shape stability
2. High mechanical strengthen and good integrity
3. Controllable pore sizes and porosity
4. Good permeability
5. Good corrosion and thermal resistance
6. Easy to be made into complicated shapes, can be put together by soldering or gluing
7. The service life can be prolonged by cleaning and regenerating process
|
|
compressed air filters ‘soak up’ oil and water and are said to run in a ‘wetted out’ or saturated state. This temporarily blocks the path of compressed air through the normally open filter structure and increases the operating pressure drop as the air flow has to force liquids through the fine matrix of the filtration media. This leads to the higher energy consumption.
Unlike typical filters, the Bossmanfilter's Microfilter elements are
does not soak up in liquids, ensuring the available open area is kept to a maximum for dirt Liquid aerosols coalesce within the anti re-entrainment barrier and fall into the filter bowl to be discharged via the drain.Solid particulate is captured and held within the open area of the filter media, eventually increasing the differential pressure to a point where it is more economical to replace the filter element.
|
|
|
|
|
|
Pall-Fit Series Filter Elements
Features
Retrofit for JB1 filter elements used in offshore applications
Dynalloy sinter-bonded filter media
Minimum collapse differential pressure %u2013 268.9 bard (3900 psid) per ISO 2941
All machined flow surfaces have 63 RMS finish
Electropolished hardware
Available in 10 and 40 micron (%u03BCm) grades, 98% efficiency
All 316/316L SS construction
Outside to inside flow
Built to ISO 9001 standards
Performance Specifications
Filter Grades (98% efficiency): 10, 40 %u03BCm
Minimum Core Collapse Pressure: 268.9 bard (3900 psid) @ 121.1°C (250°F)
Maximum Operating Differential Pressure:
2 P/N 132295-01 (63.5 mm/2.50" length):
127.6 bard (1850 psid) @ 121.1°C (250°F)
P/N 132294-01 (149.6 mm/5.89" length):
172.4 bard (2500 psid) @ 121.1°C (250°F)
Product Specifications
Materials of Construction:
Media: 316 Stainless Steel
Hardware: 316/316L Stainless Steel
Dimensions (nominal): P/N 132295-01:
Outside diameter: 30.73 mm (1.21" )
Length: 63.5 mm (2.50" )
P/N 132294-01:
Outside diameter: 61.21 mm (2.41" )
Length: 149.6 mm (5.89" )
|
|
|
ATI Dust Filters are narrow profile EMI dust and air filters. An aluminum frame surrounds aluminum tinsel media and is welded in place. Aluminum tinsel media filters the air and entraps dust particles. The aluminum frame and tinsel media combination performs as a gasket. Alco-Knit gaskets are supplied on select extrusion profiles. Dust filters are supplied in standard .172 through hole diameters for easy installation mounting. Depending upon location, filters may be vacuum cleaned in place or removed and blown with light compressed air or cleaned with mild detergent. ATI Dust Filters are primarily used at air intake locations requiring narrow space limitations to entrap dust particles, shield and cool air flow.
|
|
Laird Technologies has various vent panels to fit specific application needs.
Laird Technologies’ shielding ventilation panels are available in a wide array of materials, platings and mounting configurations. Vent panels offer designers new versatility to meet EMI, environmental and mechanical system requirements. When custom designs are needed, Laird Technologies’ engineering staff helps construct efficiencies in performance, cost and manufacturability from the very beginning stages of the application.
|
|
|
Camfil Farr Power Systems protect people, machines and the environment. We design and manufacture air cleaning, noise reducing equipment and dampers for the industry. We have been in the business for more than 40 years,and thousands of our installations can be found all over the world - assuring reliable, efficient and cost-effective day-to-day operation of turbomachinery.
|
|
|
Braden filters are standard on many OEM-supplied filter houses, because Braden manufactures the highest quality filters for Gas Turbine and Compressor Intake Systems available on the market today! Braden Filters are approved for all GT classes, including ultra-efficient large frame turbines. Our TriCelTM Final Barrier Filters combine high volumetric air flow and extremely low pressure drop along with the dust-holding capacities required by the newest generation of super efficient GTs. Call us for: prefilters, coalescers, barrier final filters and self-cleaning pulse filters.
|
|
|
|
|
|
Gas Turbines are a main power source today and high-efficiency filtration is essential for efficient operation. Mikropor Gas Turbine Air Intake Filters are used worldwide and deliver documented performance and very high efficiency over the life of the filters.
The air intake system for gas turbines must provide a clean, uniform airflow while preventing contaminants from fouling the compressor blades. However, turbines are used in many harsh environments, from coastal and offshore settings to desert conditions, and often require unique solutions for the variety of contaminants they face.
Mikropor meets this changing demand by matching the gas turbine micro-environment conditions with the right Mikropor filter - including Pulse-Jet, Static, Panel and V-Bank filters.
Mikropor Gas Turbine Filters offer:
- Documented results
- Very High initial efficiency from unique Mikropor Mikroglass technology
- Low Pressure Drop
- Range of media and products to meet different environmental requirements
- Long Service life due to durable construction and media selection
- Full Range of Efficiencies protects turbines harmful contaminants.
|
|
|
Corning filters are used in trap systems that remove particulate matter (soot) from diesel exhaust emissions. These filters have a cellular structure with individual channels open and plugged at opposite ends. Exhaust gases enter the open end, flow through the pores of the cell walls, and exit the filter through the adjacent channel. Soot particles are too large to flow through the pores, and they collect on the channel walls. Periodically the filter is regenerated (heated) to consume the soot and clean the filter.
|
|
The Camfil Farr Hi-Flo® offers high efficiency grade filtration to address today's indoor air quality problems. The Hi-Flo can remove contaminants such as fumes, smoke, bacteria, fungi and virus-bearing droplet nuclei. The Hi-Flo is the filter of choice for the removal of nuisance contaminants such as pollens, paper dust and other atmospheric impurities.
Camfil Farr have a wide range of bag filters with best performance on the market.
|
|
|
|
Air filter consumables: frames, housings, cartridges...
