|
|
Rotary Systems' ninety degree union is designed for high speeds. This swivel uses a ground shaft, mechanical seal, and dual ball bearings.
The 008 series is able to withstand moderate pressures at high speeds.
|
|
Rotary couplings and rotary valve couplings
for oil supply to rotating and swivelling installations
they have to be mounted in the centre of rotation of the installation.
In contrast to rotary couplings rotary valve couplings take on the control functions for clamping and unclamping.
max. operating pressure 250 / 500 bar
|
|
Parker's PS Series Swivels are designed to meet the application needs and performance requirements of the market. Pressure capabilities up to 5000 PSI, 1/4" through 2" body sizes, a variety of port options, and zinc with clear trivalent chromate (hexachromium free) plating. PS series swivels are available with in-line and 90 degree configurations.
Features:
* Hardened bearing races for extended service life
* Full flow design to minimize pressure drop
* Reduced bearing load design
* Variety of seal options
* Sealed bearing design - bearings isolated from media flow path
* Product designed for field maintenance
|
|
|
Goodyear is your one source for a wide selection of high-performance hydraulic hose fittings, covering a wide range of designs, shapes, sizes and pressure ratings. With low, medium and high-pressure fittings available for braided, spiral and thermoplastic hose. Fittings include Ultra-Crimp™ (1-piece), Uni-Crimp™ (2-piece), Dual-Grip™ (2-piece) and Field-Grip™ (reattachable). Our line of 21 thread ends include SAE, NPTF, JIC, British Standard, DIN and JIS. End styles include straights, swivels, elbows and flanges. Find the fittings and threads you need, from one source. From Goodyear.
|
|
The Stratoflex Products Division designs and manufactures high-pressure swivel joints for aerospace and derivative markets. Our high-pressure swivel joints are used in liquid or pneumatic systems where torsional rotation between lines is necessary.
Typical installations include retractable landing gear, cargo doors actuators, and any pivoting pressure line.
High-pressure swivel joints are compatible with all standard and many exotic fluids currently used in today’s aerospace and derivative markets.
|
|
Simplify your energy connections
with STÄUBLI centralised connections.
Increase your profitability: work with us to define your multi-coupling solution.
FAST
Centralising your energy circuits allows:
- Quick and simultaneous connection of all these circuits,
- Accessibility to all the circuits,
- Increased flexibility of your production processes.
SAFE
All the circuits are connected in a foolproof way.
MODULAR
STÄUBLI offers a large range of standard couplings which can be incorporated into the design for your application.
|
|
Tecnomagnete is pleased to introduce the new Manual Multi Coupling line TC.
TC series is compact to make easier the use even with small molds and light machines.
Moreover TC is perfectly compatible and interchangeable with most of the equipments available on the market.
|
|
|
|
|
|
Safe and quick multi-connection
Manually operated multicouplings
Features:
The hard-wearing and well proven manually operated multicouplings by WALTHER-PRÄZISION for the simultaneous connection of several gas, fluid and electric lines.
Due to the fixed assembly of the coupling elements a mix-up is impossible and the duration of the coupling process is shortened considerably. The multicouplings are used wherever process-reliable and semi-automatic operating sequences are required for production, test and control.
Automatically operated multicouplings
These couplings are used in/for automated operating sequences. The connecting movement is carried out electrically, pneumatically or hydraulically. Multicouplings in simple plate make-up may be equipped with different media and electric elements, depending on the requirement.
Key Benefits:
• high process reliability
• cost saving by quick connection
• documentable operating sequence for process monitoring
• increased operating safety / industrial safety
The following multicouplings are differentiated:
Multicouplings in simple plate make-up without motion module
Multicouplings in push-pull technique (with their own drive)
Multicouplings in shock absorber technique (balanced forces system)
Multicouplings in pull-in technique (balanced forces system)
Special docking systems
|
|
Tentube™ Series Couplings (Multiple Line Coupling)
Colder Products’ Tentube™ coupling provides one easy-to-use quick disconnect for up to ten separate fluid lines. The Tentube is available with valves on the body side in panel mount and in-line configurations for maximum design flexibility. The Tentube can connect and disconnect up to ten lines with the use of a simple slide latch. Tubing orientation is ensured by keying the coupling body and insert. Different fluids and tubing sizes can be accommodated by using acetal or polypropylene inserts in three popular sizes.
Colder also offers the TwinTube™ Series Couplings (two separate fluid lines one coupling) and the Sixtube™ Series Couplings (six separate fluid lines on one coupling).
|
|
|
|
|
|
48 KB series
The 48 series coupling system made of POM and PVDF has been developed for use in the medical, chemical, food handling, pharmaceutical and laboratory technology industries. The coupling is also available in a completely thermoplastic version (RectuChem ). Here the metal springs are replaced by springs made of PEEK, an extremely resistant synthetic material.
Advantages
The coupling is fitted with a double shut-off valve which enables it to be connected to a single shut-off (non-valved) plug as well as a double shut-off (i.e. plug with valve). The coupling is also available as a straight through coupling (valved plug).
Application
Medical engineering, dental equipment, measuring and control equipment, laboratory, pharmaceutical.
Working Pressure : PB = 0 - 10 bar (POM, bei 20°C), PB = 0 - 8 bar (PVDF, springs made of steel), PB = 1 - 8 bar (PVDF, springs made of PEEK), maximum static working pressure with safety factor of 4 to 1.
Working Temperature: -20°C up to 80°C (POM), -20°C up to 120 (PVDF), depending on the medium.
|
|
Threadless hose fittings that are a patented, innovative alternative to conventional threaded fitting. WEO Plug-In fittings simply “plug in” to hydraulic systems. A click-to-connect feature provides easy engagement of the male and female halves, without the tools required to connect and disconnect threaded fittings. Other benefits include:
- Leak-free connections.
- No follow-up tightening.
- Minimum space needed. A cartridge insert, designed to drop into the port or valve manifold, allows further reduction in space required for hose assemblies.
- Work injuries eliminated.
- Longer hose life: WEO fittings are self-aligning.
- Easy to service.
- Lower overall cost: Elimination of leakage, improved accessibility, and reduced installation time make WEO fittings lower in overall cost than threaded fittings.
|
|
Threadless hydraulic couplings: Quick - Easy - Leak-free - Safe - Compact
Gates Quick-Lok™ quick to connect and disconnect couplings for hydraulic pressure lines up to 280 bar.
Key benefits:
- Reduces the connection time
- Reduces the need for line side tooling
- Eliminates threads and torque requirements
- Provides a leak-free connection
- Ensures correct fitting every time
- Eliminates re-work at the end of the production line
- Reduces/eliminates warranty claims
|
|
The proven tube connectors according to DIN 2353 and ISO 8434-1 are suitable for most industrial and mobile hydraulic applications:
* Plastic injection machines
* Machine tools
* Hydraulic presses
* Hydraulic systems engineering
* Construction machines
* Agricultural machines
* Conveyor systems
Complete product range plus quality - as a system supplier, STAUFF supplies one of the most proven and extensive product ranges for tube connecting systems based on this principle - both in steel and stainles steel.
The product range includes:
* Cutting ring couplings
* Taper couplings
* Flared couplings
* Pre-assembly devices
|
|
|
All CEJN High-Pressure Hydraulic couplings and nipples are designed with a non-drip interface to minimized fluid spillage and air inclusion during connection and disconnection. Dust caps are a standard feature to protect the hydraulic systems from dirt and debris.
|
|
SPX range:
- Flush face, non spill.
- Complete range.
- Easy to operate.
- Easy to handle.
- Self-guided connection.
- Stäubli connection profile.
- Reliable ball locking mechanism.
- High performance.
|
|
Series HP
Nominal bore :
2.5, 4, 6, 10, 16, 20, 32 and 50 mm
Working pressure:
up to 2000 bar (dependent on nominal bore and material), in part also suitable for vacuum
Media:
mostly hydraulic oils, however can also be used for other fluids and gases
Materials:
steel oil burnished,
stainless steel 1.4404/1.4571 or similar
Special features:
unlocking safety device, many types of connection, ring grips for larger nominal bores, ring valves, vibration lock
|
|
UNIQUE SAFETY FEATURE
HP Series couplings incorporate a unique safety
feature to prevent accidental disconnection - a spring
loaded locking sleeve. When the coupling halves are
connected, the locking sleeve automatically rotates
through 90°. To disconnect the coupling the locking
sleeve is turned back 90° so the locking ball is
aligned with the release notch. The sleeve is then
pulled back and the coupling will disconnect.
ADVANTAGES Flat faces can easily be wiped clean before
connection to prevent the ingress of contaminants
into the circuit. Clean disconnection - non-spill design. No air intrusion during connection. Streamlined flow path minimises pressure drop. Locking sleeve prevents accidental disconnection. Bi-directional flow
MATERIALS
Zinc plated carbon steel body with a 302 stainless
steel spring. Nitrile rubber and Teflon seals. Other seal
materials available on request.
|
|
The innovative hydraulic pipe measuring points serv-Clip® for the MAINTENANCE OF YOUR HYDRAULIC SYSTEMS.
No only better …different!
* QUICK INSTALLATION (ONLY 3 MINUTES) - NO NEED TO CUT OPEN PIPES
* Type 1 NO SHUTDOWN of installations for mounting on pressurized pipes
installation of pressure switch, gauge and sensors, particle counters
* Type 2 SHORT SHUTDOWN of installations for mounting on NON-pressurized pipes.
add. to type 1- installation of flow rate, leackage, pressure, temperature and aqua sensors.
* Up to 630 bar / 9100 psi – screwed coupling M 16 X 2
* Particle measurement according to ISO or NAS classes
Technical Data :
* for diameters 10 - 42 mm / Tube (OD) 3/8" - 2"/ Pipe (ID) ¼" to 3"
* Working pressure up to 630 bar/ Steel wall thicknesses up to 5mm
* Working temperature from -40°C to +120 °C
* Viton O-Ring in leak proof clamp up to 200°C
COMBINE SERVCLIP WITH OUR FLOW RATE AND LEAKAGE SENSORS FLUID-CHECK AN ECONOMICAL AND INNOVATIVE CHOICE FOR YOUR MAINTENANCE.
|
|
|
|
|
|
The innovative hydraulic pipe measuring points serv-Clip® for the PROFESIONAL MAINTENANCE OF YOUR HYDRAULIC SYSTEMS.
No only better …different!
* QUICK INSTALLATION (ONLY 3 MINUTES) - NO NEED TO CUT OPEN PIPES
* Type 1 NO SHUTDOWN of installations for mounting on pressurized pipes
installation of pressure switch, gauge and sensors, particle counters
* Type 2 SHORT SHUTDOWN of installations for mounting on NON-pressurized pipes.
add. to type 1- installation of flow rate, leackage, pressure, temperature and aqua sensors.
* Up to 630 bar / 9100 psi – screwed coupling M 16 X 2
* Particle measurement according to ISO or NAS classes
Technical Data :
* for diameters 10 - 42 mm / Tube (OD) 3/8" - 2"/ Pipe (ID) ¼" to 3"
* Working pressure up to 630 bar/ Steel wall thicknesses up to 5mm
* Working temperature from -40°C to +120 °C
* Viton O-Ring in leak proof clamp up to 200°C
COMBINE SERVCLIP WITH OUR FLOW RATE AND LEAKAGE SENSORS FLUID-CHECK AN ECONOMICAL AND INNOVATIVE CHOICE FOR YOUR MAINTENANCE.
|
|
24 KA series
Durable, single hand quick connect coupling made of brass. The sealed sleeve prevents dirt from reaching the internal parts. The construction is based on the 26 series, which has proven its worth many times over the years and can be used for a multitude of applications.
Advantages: Single hand operation and a multitude of connecting options.
Applications: Air tools, automotive, compressed air, mechanical engineering, compressors.
Working Pressure: PB = 35 bar, maximum static working pressure with safety factor of 4 to1.
Working Temperature: -20°C up to 100°C (Buna N), -40°C up to 120/150°C (EPDM), -15°C up to 200°C (Viton®), depending on the medium.
|
|
|
Stainless steel double ring fittings and valves. Unions, tees, crosses, elbows, needle valves, regulation valves and check valves
|
|
TECVAL two-ferrule compression fittings offer an anti-leaking shut-off and avoid twisting the piping. The two-ferrule system guarantees a correct seal, saving material variations as well as different pipe thicknesses and hardnesses.
They can be easily assembled without any especial tool.
Made in several alloys.
|
|
|
|
|
|
The basic bite type fitting was first developed in Europe in the early 1930s.
The Ferulok fitting was later developed by Parker-Hannifin and introduced to the U.S. market in the mid-1940s. The Ferulok fitting design utilizes a combination of proven European features, coupled with many innovative product improvements instituted by Parker Hannifin.
Today, the Ferulok fitting design and performance capabilities far exceed the strict requirements of SAE and military standards. The Ferulok fitting is a flareless fitting that consists of a body, a one-piece precision machined ferrule, and a nut. On assembly, the ferrule "bites" into the outer surface of the tube with sufficient strength to hold the tube against pressure, without significant distortion of the inside tube diameter. The ferrule also forms a pressure seal against the fitting body. Ferulok fittings allow the fitting assembler to visually inspect the bite quality, thus significantly minimizing the risk of improper assembly and related service problems. Ferulok fittings are especially suitable for use with tube wall thicknesses ranging from medium to extra heavy.
Ferulok’s robust construction and proven sealing characteristics have gained it worldwide popularity in diverse markets and applications. Ferulok fittings are routinely used in markets, such as: Machine tools, chemical, military, oil refineries, paper making, thermoplastics processing, etc.
|
|
SMC Series Subminiature Couplings
The SMC Subminiature Coupling is Colder Products’ smallest coupling. This twist-to-connect coupling provides a reliable and more secure alterative to luer-type connections. The SMC also allows the tubing to rotate freely when connected, which prevents both kinked tubing and accidental disconnection during use.
|
|
All-purpose medium pressure series MD
Features:
The series MD comprises double shut-off couplings in nominal sizes from 6 to 50 mm. This series is available in different materials with various surface coatings.
Key Benefits:
• unlocking device
• universally applicable
• extremely hard-wearing & durable
• various seal materials
• variety of optional equipment
• broad spectrum of connection types in the standard version
• ring grips optionally available for large nominal sizes
Nominal sizes:
6, 7, 12, 19, 25, 32 and 50 mm
Media:
• water
• compressed air
• diverse fluids
• fuel
• lubricating greases
• hydraulic oils and many more
Pressure Range:
up to 250 bar (depending on nominal size and material), partially suitable for vacuum
|
|
225 KL series
The 225 KL coupling system was developed for the chemical and beverage industries for filling and draining containers. There is no leakage loss whatsoever during the connecting as well as the disconnecting process. The EPDM seals conform to the FDA regulations.
Advantages
High flow rates, easy to clean, simple to dismantle, moving parts are encapsulated and external to the product flow. The screwed connection allows manual connection even at a pressure of 4 bar.
Applications
Pharmaceutical, food and beverage.
Working Pressure: PB = 16 bar, maximum static working pressure with safety factor of 4 to1.
Working Temperature: -40°C up to 120/150°C (EPDM), -15°C up to 200°C (Viton®), 0°C bis 316°C (Kalrez®) , depending on the medium.
|
|
| ... products without technical information |
| |
|
|
Hydraulic couplings
