|
|
| A family of in-line composite body flow controls, needle valves, and check valves that are tough and corrision resistant. Four stage, tapered needle design provides infinite control. Tamper resistant locking ring prevents unwanted adjustments to the valves. These can be used in-line or be panel mounted. ARO's 360 degree Swivel Right Angle Flow Controls are ready for installation on all ARO Cylinders. |
|
Features
The Model 10BP is a high capacity regulator
that relieves excess pressure in a pneumatic
system.
The Model 10BP provides greater accuracy
than relief valves over a narrow pressure
range. The Model 10BP is an excellent choice
for a wide range of precision applications.
The Model 10BP has the following features:
- Control sensitivity of 1/8" water column
allows use in precision applications.
- A separate Control Chamber and Aspirator
Tube isolate the diaphragm from the main
flow to eliminate hunting and buzzing.
- Unit construction lets you service the Model
10BP without removing it from the line.
- Mounting Bracket is available. |
|
The modular subminiature precision pressure regulators are ideal for instrumentation, medical and industrial applications. They provide the ultimate in regulation of pressure and feature excellent repeatability, a sensitive 20 turn adjustment and miniature size.
Balancing of the valve seat gives an output that is virtually unaffected by changes in supply pressure. Only 0.1 PSI output change with a 10 PSI supply change. |
|
R119J
high-duty and low-cost
0.2 - 18 bar, ratio 1:1
G1/4 - G2 1/2, 44 000 l/min
|
|
Pressure Regulator
Sizes Available: Miniature Series 1/8", 1/4" NPT, Compact Series 1/4", 3/8", 1/2" NPT, Large Series 1", 1-1/2" NPT
Relieving diaphragm air pressure regulator reduces system pressure to level.
Includes a non-rising plastic knob adjustment.
Maximum Inlet Pressure: Miniature 250 psig, Compact 300 psig, Large 300 psig
Regulated Secondary Outlet Pressure Ranges: Miniature: 5 to 50 psig and 10 to 100 psig; Compact: 6 to 60 psig, 12 to 125 psig, 15-150 psig; Large: 5 to 50 psig and 15 to 150 psig. |
|
Medium: compressed atmospheric air
Max. Primary Pressure: 25 Bar / 355 PSI
Flow: 0 %u2013 700 L/Min / 25 cfm
Temperature: 0 %u2013 80°C
Weight: 25 gr.
Material: Housing: Aluminium
Other parts: Stainless Steel, Nitrile Rubber, Brass
Almost every pneumatic tool would have the max. torque at around 6 bar. Higher pressures (which is often the fact as many users just plug in the tool and use the prevailing working pressure f. inst. 8 or more bar) is just waist of energy and money. It would not give more torch - on the contrary - it is just changing into heat. And many available pneumatic tools on the market can only withstand a max. pressure of 8 bar.
If the user dismount the hose from the tool or outlet directly a residual pressure would still prevail on the secondary side of the regulator. This residual pressure could make the pneumatic tool to work for a short period of time. An unintentional activation of the tool could have desastrous consequences - no matter the type of pneumatic tool. The worst incident that can happen is on a pneumatic tacker, nailgun or the like. An unintentional activation on the trigger f. example can result in 5 - 10 shots. No reason to say that bad enjuries would be the result.
|
|
64-2600 Series: Pressure Reducing Regulator
Semiconductor grade pressure reducing regulator. Available in two inlet pressure versions, 600 psi and 3,500 psi. For low flow applications. With several outlet pressure ranges up to 500 psi. 10 or 5 Ra internal surface finish. Tube stubs or metal face seal type connections. |
|
This proportional pressure regulator with digital control can be configured using a PC software, to optimise its response time and accuracy, while maintaining its reliability and dynamic performance levels.
Integrated functions:
* Digital display
* PID parameters set-up
|
|
AirTronic
solid industry design, 1% precise
with proportionalmagnet, G1/8 - G1
0 - 0.1 / 50 bar, vacuum, 300 / 6800 l/min
|
|
... fast, accurate, highly-dynamic.
Proportional valves of the tecno series are piezo controled pressure valves with electronic pressure control.
Piezo technology offers highest dynamics with lowest power consumption. High venting and exhaust capacity supplies the main valve. The pressure sensor measures the active output pressure. An integrated electronic automatic controller compares the sensor signal with the electrical set value and regulates the output pressure precisely on the given set value.
These features characterise HOERBIGER Piezo Proportional Valves:
- extremely short reaction time
- virtually infinite resolution
- lowest power input. |
|
MPT 40 Electronic regulator proportional Moduflex
The access to technology proportional just by the actuation of a knob
Description:
* Openings of connection 1/8 `' & 1/4 `'.
* Pressure of maximum entry. 10 bar.
The new electronic regulator proportional regulates quickly with precision and maintains the pressure of exit, without influence of the flow, via an electronic signal of control. Operation with compressed air or inert gas.
Advantages:
* Posting by LED with characters in rougeet of great legibility.
* All controls on the same face.
* Convivial and simple software.
* Standard product which answers all waitings of the customers.
* Compact & light (285 G).
* Fast ultra response time.
* Exhaust full flow.
* Excellent linearity.
* Assembly on rail DIN.
Applications:
Auto industry
* Control of the forces of clamping and welding during the sheet metal assembly
* Control specifies paint by immersion and spraying.
Industry of the packaging
* Control specifies tension for sheets and paper of packaging. |
|
| The Type-100 is a high precision, multi-stage pressure regulator. This pressure controller provides the highest level of regulation accuracy and repeatability available. The Type-100 is ideal for applications that call for the utmost of control and maximum stability under variable operating conditions. A stainless steel measuring capsule is used as a sensing element to activate the high gain servo balanced control mechanism in which the main valve is controlled by a pilot valve.This allows for greater accuracy and eliminates many of the problems associated with conventional regulators using range springs and diaphragms. |
|
74-3000 Series: Pressure Reducing Regulator
Semiconductor grade pressure reducing regulator. Available with inlet pressures up to 3,000 psi. For high flow applications. With several outlet pressure ranges up to 150 psi. 10 or 5 Ra internal surface finish. Tube stubs or metal face seal type connections. |
|
Features
- Control sensitivity of 1/4" water column
variation allows use in precision applications.
- A compensating diaphragm lets the
regulator remain unaffected by supply
pressure changes.
- Flow of up to 40 SCFM with 100 psig
supply allows use in applications with high
flow requirements.
- An aspirator tube compensates downstream
pressure droop under flow conditions.
- A separate Control Chamber isolates the
diaphragm from the main flow to eliminate
hunting and buzzing.
- Unit construction lets you service the Model
30 without removing it from the line.
- Canadian Registration Number (CRN)
Certification for all territories and provinces |
|
B3000
filter regulator, stainless steel throughout
5 and 50 µm, G1/8 - G1
outlet 0 - 3 / 50 bar, max. 6000 l/min
|
|
Features
- The no-brass construction is well suited to
harsh environments.
- Internal and external epoxy finish for
superior corrosion resistance
- Non-bleed design to reduce consumption
- Integral Relief Valve
- A Gauge Port provides convenient
pressure gauge mounting.
- The standard 5-micron filter minimizes
internal contamination.
- The Filter Dripwell contains a Drain Plug
to easily drain trapped liquids.
- Standard Tapped Exhaust
- Soft Relief Seat minimizes air loss
- Canadian Registration Number (CRN)
certification for all territories and
provinces. |
|
| The ControlAir Type-850 and Type-860 are compacts unit that provide low-cost, high performance pressure regulation of compressed air (Type 850 and Type 860) or water (Type 860). Designed specifically for the OEM market, these units are ideal for compressed air or water pressure control applications. The highly sensitive diaphragm-operated design delivers accurate downstream pressure by eliminating the problems caused by sticking in piston designs utilized by competitors. A molded rubber supply valve provides accurate regulation and prevents leakage. |
|
The miniature Preset Flow Control is ideal for many applications involving pneumatic systems, including the control of cylinder speed.
The operation of the flow control is based on the movement of a small disc. The flat surface on one side of the orificed disc seals and permits flow through the orifice. The amount of flow permitted in the reverse direction is determined by the orifice size. In the forward direction full flow is permitted. The flow controls design allows a maximum supply pressure of 75 PSI with a minimum cracking pressure of less than 10” H2O. Orifice sizes are available from .004” to .040”. |
|
| Alicat Scientific's line of digital pressure controllers offer customers precise pressure control for applications ranging from hard vacuum through 300psig. The Alicat PC series pressure controller relies on cutting edge electronics to drive a single valve that results in incredibly fast and accurate pressure control. The PC series instrument is offered with standard RS-232 digital communication as well as a choice of analog communication. Also standard is a 302 stainless body with aluminum case and digital display. The PC series device is also backed by the industry's first lifetime warranty. |
|
KOFLOC 9100, 9100R, 9100M
The KOFLOC Auto pressure Controller MODEL 9100 SERIES is based on a type of mass flow controller that controls pressure using a pressure sensor. Capable of controlling pressure at either inlet or outlet, this unit can be used alone or in conjunctions with other mass flow controllers. The MODEL 9100 SERIES utilizes the unidirectional normally closed valve with higher dependability and safety. This valve also reduces internal dead-space. It is equipped with the vapor deposition semiconductor distortion gauge type sensor for high accuracy at 1% F.S and improved control and response at all levels. It also offers a choice of response time of either 1 s or 6 s at F.S. The lineup includes a standard high temperature option especially suited for baking process and can withstand temperature of up to 80¡ÆC.
FEATURES
- Rohs compliance - SEMI stndard connections - SUS316L stainless steel
- Unidirectional normally closed valve - Highly reliable solenoid actuator
- Compact - Free mounting position - Easy maintenance
- Wide selection of fittings, seals, wetted materials and communication interfaces
APPLICATIONS
- Bioreactor - Fuel cell - Chamber pressure regulator
- Burn control |
|
Pressure controls serve various functions, which may be divided into control and protection functions. Examples for control functions are compressor cycling, pump-down or defrost control. Protection functions include, pressure limiting and cut out against excessive pressures, against loss of charge or for freeze protection.
Our pressure controls are equipped with display scale and pointers to indicate the approximate settings. The display scales are printed in relative pressure units "bar" and "psi". For precise setting of the controls, external gauges must be used. |
|
Self-operated pressure, differential pressure and flow regulators with wide set point ranges for process and supply engineering.
The millibar version of the regulators is perfectly suited for tank blanketing. |
|
Swagelok® Pressure-Reducing Regulators
Pressure-reducing regulators control outlet pressure by balancing an adjustable spring force against the forces caused by inlet and outlet pressures. The spring force is adjusted by turning the stem/handle, which sets the desired outlet pressure. Swagelok pressure-reducing regulators offer reliable pressure control over a broad range of pressures, control ranges, and control requirements.
Specifications
Maximum Inlet Pressure: Up to 10 000 psig (689 bar)
Pressure Control Ranges: 0 to 2 psig (0.13 bar) through 100 to 10 000 psig (6.8 to 689 bar)
Temperature Range: Up to 392°F (200°C)
Flow Coefficient: Up to 1.0
Features:
Piston-sensing and diaphragm-sensing designs.
Fine-pitch stem threads enable precise spring adjustment with low torque.
Captured dual-gauze type filter.
High-pressure and high-flow models.
Two-stage regulators.
Low-pressure models.
Venting options available.
|
|
The PRS6 is a three-way pressure reducing valve that has been developed to give reduced pressure in a particular part of the hydraulic system. The valve maintains the secondary pressure setting constantly, regardless of pressure variations on the primary side. Common applications include pilot circuits in hydraulic and electro-hydraulic servo systems.
Compact and easy to install
Easy to adjust within respective pressure range
Can be factory set and sealed to prevent unauthorized pressure changing
Highly suited for use as a reducing valve in pilot circuits where the pilot pressure is taken from the main circuit |
|
R038/R039
plastic construction, for air or water
40 x 76, precise, G1/8 - G1/4
outlet 0 - 2 / 12 bar, 380 l/min
|
|
Cube 100 Regulator
Max. primary pressure: 12 bar/170 psi
Temperature range: 0-60 °C
Pressure gauge connection: G 1/4"
Outlet pressure range: 0-10 bar
Weight: 1235 g
Material: Housing: Aluminium
Top cover: Glassreinfoced polyamid
Other parts: Nitril rubber - Brass
Cube 100 Regulator is a single-acting selfrelieving piston regulator. The regulator is inlet pressure compensated. The regulator is designed for use with compressed atmosphaeric air. |
|
|
|