|
|
CNC lathe for shaft applications. Highly efficient 2 saddle turret.
(GN-30TTS, GN-51TTS)
GN-30TTS GN-51TTS
Recommended work size(mm) 550 650
Spindle dia.(mm) 100 120
Spindle speed(min-1) 3500 2000
Slide stroke(mm) X-axis(left) 300 300
X-axis(right) 300 300
Z-axis(left) 480 590
Z-axis(right) 540 590
Tooling 10-position turret 12-position turret
NC device FANUC 21iTB
|
|
= NL2500Y/700 =
A lathe which moves the world.
Ever since our first machine tool rolled off the production line in 1968, we here at Mori Seiki have continued to make CNC lathes that are praised by customers everywhere.
Over those 35 years, we have released around 100 models.
We can say with confidence that we believe every single one was an improvement on its predecessor.
So Mori Seiki has been able to create a new generation of CNC lathes, a lathe that moves the world.
By reviewing the structure of every feature, by confronting the problem of heat generation, by reflecting on a product which incorporates all the customers' many demands.
Through uncompromising development, we have achieved previously unheard of levels of rigidity, accuracy and reliability.
Our efforts have created our newest line, the NL Series.
These new machines are high-rigidity, highprecision CNC lathes and set the new standard in "common sense" machining for a new age. |
|
Chevalier has always believed that people are the most important part of any business. However, how do you enable these people to work consistently at maximum efficiency with optimum output? You must supply them with the right machine tools. Chevalier’s range of expertly designed, high speed, high accuracy and high efficiency CNC lathes enable your business to reach the very highest level of productivity possible. Chevalier’s CNC lathes are perfect for the high speed cutting of highly durable and hardwearing materials such as; steel, aluminum and copper. Furthermore, despite a very high rate of work, Chevalier’s CNC lathes are also carefully designed to have an extremely high level of accuracy. It is this commitment to accuracy, speed and efficiency that set CNC lathes produced by Chevalier above those made by their competitors. The operation of the CNC lathes produced by Chevalier is extremely simple, with easy loading and unloading of work pieces, ensuring that work can continue throughout the entire working day.
Technical Features:
One-piece construction with slant back, owns high rigidity and reliability.
Gang- type tool selection, which shorts tools changing time, and improve working efficiency.
Front moving coolant tray and rear/side chips conveyor make the footprint of the machine smaller.
It is ideal for high speed cutting on materials like steel, cooper, aluminum and casting. The machining accuracy of the workpiece is high.
User-friendly operation design
|
|
Highly automated Lathe provides excellent flexibilty
45° inclined bed minimizes thermal stress of machine bed and allows easy removal of chips from the work space
extremely powerful main drive for this machine class
infinitely variable spindle speeds up to 5000 rpm
automatic bar feed for bar lengths up to 79”
high-quality preloaded ball screws ensure maximum precision
extremely user-friendly state-of-the-art CNC control
compact design and high stability |
|
EMAG VSC / VSC 7
Another standard vertical turning machine for chucked components: turning + automation on a single machine.
What distinguishes the VSC series of machines are high productivity levels, extremely high and constantly maintained precision, exceptional process integrity and a high degree of operator friendliness.
|
|
| CNC turning center, top thermostability, top cutting precision, cutting-edge control technology from Siemens or Fanuc, JobShop programming software included, best European quality, Made in Austria |
|
The EMCOTURN E25.
Uncompromising quality right down to the last detail at an unbeatable price. With an extremely solid machine base, a thermosymetric spindle headstock, high-precision spindle bearings, preloaded roller guide ways in all axes, a fast tool turret and your choice of Sinumerik 810D or Fanuc 0iTC - with dialogue programming. |
|
| The ET 420MCplus - two machines in one. Two main spindles, two counter-spindles, and two tool systems allows the ET 420MCplus to machine two parts at the same time in each cycle. However you want to look at it, invest once and double your production rate our cut your runtimes in half. Twice as much output, but just the same input: the ET 420MCplus is just as easy to operate as a conventional CNC lathe. |
|
|
With the EMCOTURN E65, we offer top European technology at the best possible price. And you don`t have to go without anything: the EMCOTURN E65 has driven tools with a mighty 5 kW of drive performance, C-axis, a bar loader package, your choice of SIEMENS or FANUC control unit and much, much more. And all that in the highest quality. For precision parts and a long machine life.
|
|
| The EMCOTURN 332MC. High-tech and compact. Double spindle and twin tool systems with driven tools are standard features. So too is the state-of-the-art control technology with digital drives. And to make things even quicker and even easier, we have a full range of automation options for the ET 332MC. |
|
CNC Turning Centers
Uncompromised performance and specifications
Produced in Mazak's 8 Cyber Factories around the world, Mazak CNC Turning Centers provide the performance you have been looking for. From 2-axis turning to the most advanced twin spindle, multi-axis machines, from compact to heavy duty, Mazak has the turning centers to meet your needs.
|
|
Chuck Size 15" (18") 15" (18")
Swing Over Bed mm 800 Inch 31.46
Maximum Turning Diameter mm 590 Inch 23.22
Maximum Turning Length mm 1100 Inch 43.30
Spindle Speed RPM 2000 RPM 2000
Maximum Bar Size mm 117 Inch 4.60
Spindle Motor Kw 30 hp 40
Rapid feedrate (X/Z) m/min 20 / 24 ipm 787 / 944
(X + Z) axis travel mm 345 + 1150 Inch 13.58 + 45.27
Floor space(L*W) mm 4300 x 2300 Inch 90.9 x 169.3
Machine weight KG 9,500 lbs 20,944
Electric Power kVA 75 Amp 197
Turn Mill
Resolution Deg. 0.001 Deg. 0.001
RPM RPM 4,000 RPM 4,000
Turret Station 12 12
|
|
High Productivity, Versatile & Integrated Lathe
High Speed, High Accuracy
High Rigidity, ensures Long Tool Life and Machining Accuracy
Integrated Operation
Easy Control
Convenient Operation
|
|
This machine has the same features and design as our popular ML18 and ML22 lathes but in a smaller size.
Manual or Full CNC Operation
Direct High Torque Spindle Drive
Gap Bed Design
Large Swing Over Cross Slide
Double Door Full Enclosure
Chip Drawer for Easy Cleaning
15 HP Spindle gearbox and vector spindle drive
Chuck Guard and Door Safety Switch
Auto lubrication
Optional steady and follow rests
Off-line programming software
Optional constant surface speed and threading cycles
Ground turcite ways
Optional 8 station automatic turret |
|
The INTEGREX is the most widely used multi-tasking machine tool in the world.
Mazak multi-tasking machines have been well received by customers all over the world. Equipped with the MAZATROL MATRIX and many newly developed features, Multi-tasking machines provide innovation to 21st century manufacturing industry. From raw material to finished component in a single machine set-up: "DONE-IN-ONE".
|
|
SKL vertical lathes and vertical turning centers
The SKL vertical lathes are manufactured in three sizes with table diameters of 800, 1.000 and 1.250 mm. These machines are different from all other machine types manufactured in TOSHULIN, a.s. They consist of the welded frame formed by the bed, by the columns, by the railhead and by the ram. The machine cross rail provides the connection between the columns in a very effective way. It is fixed together with these columns. Moreover, the two-column conception enables to increase considerably the swing for machining towards the table diameter.
|
|
Highly precise 6-sided complete machining of complex workpieces has never been easier than with the expanded GMX linear series. The new GMX 250 S linear with dual channel shop-floor programming - for programming time reductions of up to 70% in comparison to DIN. In addition, the new GMX 200 S / 250 S linear machines are easy to operate, due to shop-floor oriented visual programming and 3D-simulation with collision control. The GMX linear series machines deliver perfect performance, whether for turning, boring or milling of chuck, bar and shaft workpieces.
|
|
The HSTM series is especially developed for cost-effective manufacturing of high-precision work pieces, such as turbine blades, blisks and impellers. The machine concept allows single-part and series production as well. Latest drive and control technology guarantees high productivity and flexibility. Rigidity is a further key element of the HSTM series and supports with all other factors the technology of High Speed Cutting (HSC). Splendidly designed rotary axes with standard interfaces are the substantial characters for the highest productivity.
Availability for Production:
The compact design of the machine allows a quick and trouble-free instalation at the customer's site without any special requirements to the basement. Thus, a quick availability of the machine is given.
Machine Size:
The machine is in different sizes avialable. Customization for your work pieces are possible. The modular concept allows easy adaption to your specific request. Blisks with diameter 850 mm are possible with a variant of the machine. Differnet opportunities to load the work pieces to the machine, such as front loading or from the side, up to full integration in manufacturing systems with automatic loading systems can be realized.
Milling Spindle:
The Motor-Milling Spindle offers a high potential to machine difficult materials. High spindle speed for Aluminium, or strong spindle power with lower spindle speed for Titanium are available in the same Motor Spindle.
All kind of cooling and lubrication systems are integrated. So you will find outer cooling, high pressure, Minimum Quantity Lubrication through the spindle or outside of the spindle. |
|
- Identical main and counter spindle for complete machining
- Cycle time reduction by simultaneous machining at the main- and counter spindles
- Y/B-axis option for inclined, off-center drilling and milling
- 6-tool magazine for the additional milling spindle
- Quick, simple tool measuring on the machine
- Gantry workpiece receiving attachment for workpiece loading and unloading
|
|
- Main and counterspindle with the same design and power
- Flexibility and short set-up times due to the Multi Function Units and automatic tool magazines
- Short tool change travels and reduced chip-to-chip times
- Full 5 axis interpolation for the machining of the most complex contours
- Driven tools for all machining tasks in C, Y and B axis
- True turn-mill center with up to 2 motor milling spindles
|
|
|
Turn Mill Centers give your business the flexibility to produce complete components in one operation and distinct competitive edge. Based on the proven DX design with all the tried and tested family features their 12 driven tool stations give you milling, drilling and turning in a single set up with no need for additional processes. The SIEMENS 810D Controller includeds 10.4” colour screen, rigid tapping on all axes, live tool orientation, cylindrical and polar co-ordinate interpolation and Shop Turn software for simple shop floor programming all as standard.
|
|
|
The NILES-SIMMONS C-Series consists of modular CNC turning and milling centers of sizes N 30 MC, N 40 MC and N50 MC for complete machining processes of large rotationally symmetrical workpieces. Single- and multislide units can be chosen as the basis of the machine. Thanks to the modular system, the basic unit can be supplemented with a variety of different accessories: a universal turning-boring-milling head, an additional milling unit or a turning and boring slide rest for heavy-duty cutting tool disc revolver are just a few examples of the outstanding flexibility of the NILES-SIMMONS C-series.
|
|
|
|
Horizontal lathes, Horizontal turning centers
