|
|
The Unicom 6000 machining centre is ideally suited for vertical turning and multi-sided machining of complex components. This highly flexible and powerful machining centre for complete machining results from the continuous development of vertical machining centres over a period of more than 25 years.
The concept of Unicom 6000 is based on a moving table with integrated carousel turning station and an interface that can receive pallets of up to 2.500 mm in diameter. The table movement is designated as Y-axis and it runs underneath a traverse with cross slide and spindle carrier. The movements of cross slide and spindle carrier are designated as X-and Z-axis respectively.
Unicom 6000:
4-Axes complete machining centre with HSK100-A interface, carousel turning station and pallet changer. The machine can be equipped with a right angular head or a universal head, in combination with C-axis mode in the carousel turning station.
Unicom 6000-HV:
5-Axes complete machining centre with carousel turning station, pallet changer and HSK 63-A interface in the integrated Unisign Nutator NC machining head as 5th axis, in combination with C-axis mode in the carousel turning station. This configuration is capable of 5-axes machining of complex components.
|
|
The Vertical Line series machines with automated job feeding feature and special high speed electro spindles are quite suitable for mass production jobs. With modular tooling concept these machines are capable of performing variety of operations in one setup like, Turning, Milling, Drilling & Tapping and even Grinding. Vertical Line easily replaces horizontal single spindle machines with automation of gantry loaders or robots because of its simplicity and compactness.
The concept of moving the inverted vertical spindle head in all axes and keeping the front space of base open for customization of tooling requirement makes this machine series unique. Vertical Line series machines are having a single piece rigid construction base which supports all moving and stationery components
|
|
|
The C series is based on the slant- bed machines of sizes N 30, N 40 and N 50. The basic assemblies and components such as the bed, lathe spindle and driving units as well as the tailstock or counter spindle are identical with those from the lathe series. Single- and multi-slide concepts are available as parts of a modular design system.
|
|
Highly productive milling-turning centers with one (MT) or two (MT-TWIN) milling spindles and one or two turning spindle(s) for complete machining of semi-finished products and saw sections.
Maximum workpiece quality by complete machining on one machining center. Workpiece clamping is done by means of clamping chuck or device.
The MT-S is designed for highest flexibility and ideal for small batches. The MT and MT-TWIN series offer maximum productivity for medium and large batches.
Reduction of costs per part by up to 30 % thanks to TWIN technology and 5-axes complete machining.
|
|
- Identical main and counter spindle for complete machining
- Cycle time reduction by simultaneous machining at the main- and counter spindles
- Y/B-axis option for inclined, off-center drilling and milling
- 6-tool magazine for the additional milling spindle
- Quick, simple tool measuring on the machine
- Gantry workpiece receiving attachment for workpiece loading and unloading
|
|
The EMCOMAT 14 is the smallest machine in the EMCOMAT series. It replaces the EMCO classic MAXIMAT Super 11CD. The EMCOMAT 14 is a lathe for the toughest demands:infinite speed adjustment, 5.4 kW drive performance and yet compact and highly accurate. This mini with a maximum of class can be found in every workshop where top precision is needed in a small space: in optical, electric and automobile shops, in laboratories and on the Formula 1
Produced acc. to ISO9001:2000
|
|
Extremely high speed range 28- 2250 rpm
Infinitely variable spindle speed in 3 gear steps
Consistent cutting speed
Rotary control at support allows speed pre-selection, speed indicator LED at the headstock
3-step gear drive with automatic shifting - no manual shifting required - high torque
Drive controller regulates the infinitely variable speed range
V const! - This feature ensures consistent slide way speed at the turning tool cutting edge even
with changed workpiece diameters. The result is a turning surface quality that normally only can be achieved with CNC lathes!
Electronic spindle brake and foot brake
Spindle stop
|
|
|
These are standard with either two or three rollers, either automatic or CNC controlled and are able to Flow-form cones and pressed parts.
|
|
This compact turning center allows a customer to enter into production turning without a large investment. With a standard 12 position automatic turret, hydraulic chuck and 15 HP spindle, this conversational turning center is a great value!
Heavy duty linear way construction
Conversational programming
6 Mb standard memory
Graphic program verification
AC Yaskawa digital servos
1200 IPM rapids
15 HP 2 speed high torque spindle
Small footprint
Precision 4000 RPM spindle
Machine weight 7100 lbs
Optional tool setter, chip conveyor, and bar feeder
Off-line programming software
Standard constant surface speed, IPR and threading cycles
12 station automatic turret
Hydraulic tailstock
Hydraulic 3 jaw chuck
|
|
The EMCO MAXXTURN 65 makes light work of the most demanding milling jobs, with its high-precision C axis and extremely stiff Y axis with large positioning range. And so you lose neither time nor money in the process, we have greatly increased its rapid-motion speeds and significantly improved its performance. What is more, the EMCO MAXXTURN 65 comes with your choice of SIEMENS or FANUC control systems.
Technical Data
Main spindle
Bar capacity Ø 65 (76) mm (2.6 (3)")
Chuck diameter Ø 250 mm (9.8")
Maximum drive power 29 kW (38.9 hp)
Maximum speed 5000 rpm
Counter spindle
Chuck diameter Ø 200 mm (7.9")
Maximum drive power 22 kW (29.5 hp)
Maximum speed 7000 rpm
Turrets all driven
Maximum drive power 6,7 kW (8.2 hp)
Maximum torque 25 Nm (18.4 ft/lbs)
Maximum speed 5000 rpm
Travel
Travel in X/Z 260/610 mm (10.2/24")
Travel in Y 80 ( /%u201340) mm
(3.1 ( /%u20131.6)")
|
|
The EMCO MAXXTURN 95. The new measure of all things. Thermostable, highly productive and high-precision. We make sure it is with a water-cooled hollow-spindle motor, an extremely accurate C axis and a very stiff Y axis with large travel. And so all these features don't make you lose control, the MAXXTURN 95 is available with either a FANUC or a SIEMENS control unit.
Fields of application:
Hydraulic/pneumatic components
Motors and motor vehicle parts
Machine components
Medical technology
Friction and antifriction bearing parts
Materials-handling technology
Mounting technology and many more besides
|
|
The EMCO MAXXTURN 110 takes care of the most demanding turning and milling operations just as perfectly as the machining of precision parts with the highest-quality surfaces. We make sure of this with a high-precision C axis and a very stiff Y axis with large travel. On top of this come the very high rapid-motion speeds and the optimum performance. Your choice of FANUC or SIEMENS control unit. The EMCO MAXXTURN 110: Quite a piece of work.
Technical Data
Main spindle A2-11"
Spindle bore in drawtube 110 x 1000 mm
(4.3 x 39.37")
Max. Power 42 kW (56.3 hp)
Max. Torque 2000 Nm (1474 ft/lbs)
Maximum chuck diameter 400 (500) mm
(15.7 (19.7)")
Tool turret
Speed range 0 - 4 000 rpm
Power max. 10 kW (13.4 hp)
Torque max. 70 Nm (51.6 ft/lbs)
|
|
Because just like its big sisters MAXXTURN 65, 95 and 110, the MAXXTURN 45 is also a well high perfect solution for low-cost complete machining off-the-rack. Fitted with a counter spindle, driven tools, a high-precision C axis and very fast rapid-motion speeds, the MAXXTURN 45 offers everything the customer needs to manufacture complex turned and milled parts, not only in high quality, but also cost effective. A very special highlight of the new MAXXTURN 45 is the Y axis. It has been integrated into the machine structure and stands on extremely wide-set guide rails. This ensures extreme stiffness and top precision, even when performing difficult cutting tasks. In addition, the MAXXTURN 45 has a Y axis with a very large travel, which also increases the number of machining options when turning and milling. The MAXXTURN 45 is available with either a SIEMENS or FANUC control unit – and SHOPTURN or Manual Guide are standard equipment.
|
|
NANO TURN Sub-micron Controlled High-Precision CNC Turning Center
The Nano Turn offers high machining accuracy. With a continuous machining accuracy of 2um, O.D turning roundness of 0.2um and surface finish of 0.2um, it is the ideal CNC turning center for finishing ultra precision parts.
Various cooling systems minimize thermal displacement over extended periods of operation.
|
|
= NT4250 DCG/1500SZ =
Machining centers and lathes.The fusion of two cutting-edge
technologies leads us into a new era of multi-axis machines.
What customers want from a multi-axis machine is simple: increased
productivity from basic cutting processes.
Mori Seiki has thoroughly examined market needs, and arrived at one main conclusion: the market requires a multi-axis machine that possesses machining abilities beyond those offered by machining centers and lathes
individually.
By combining Mori Seiki's original, cutting-edge technologies, the milling ability of the NH Series horizontal machine centers and the turning ability of the NL Series CNC lathes, the NT Series, the ultimate integrated mill turn center, becomes a reality.
With greater productivity than all other machine tools, the NT Series is leading the industry to a new era of multi-axis machines.
|
|
= NT6600 DCG =
The NT6600 DCG integrated mill turn center for large workpieces in all industries, including aircraft parts, construction machinery, and automobile parts, was developed to incorporate machining capabilities that surpass those of machining centers and lathes into a single, ultimate machine. An optimum combination of Mori Seiki's unique DCG (Driven at the Center of Gravity), DDM (Direct Drive Motor), and ORC (Octagonal RAM Construction) technologies in a new, high-rigidity mechanical structure achieves high-speed, high-precision machining. Inheriting the superb performance of the NT Series and representing a further step forward with support for long and large-diameter workpieces, the NT6600 DCG is the ultimate integrated mill turn center.
The NT6600 DCG boasts a maximum machining length of 6,076 mm, a maximum machining diameter of 1,070 mm, and a Y-axis travel distance of 660 mm, all number one in the world. This integrated mill turn center is also the fastest with a Z-axis travel speed of 32 m/min and a tool change time of 10 seconds or less. In addition, a long boring bar suitable for Tool-tip ATC and up to three rests (two when the distance between center is 3000 or 4000) are available as options to help achieve high-speed, high precision machining of large workpieces.
|
|
Turn numerical 2 axes, covering races of 200x100mm and designed to easily machine parts out of brass, aluminum and plastic.
This turn CN is compatible with many software or programmable ISO codes some.
|
|
With the DECO 2000 concept Tornos has established a successful syntheses out of its most advanced technology and its longstanding experience. Thanks to the controls of the DECO series Tornos is able to offer modern integrated solutions for the Windows® environment:
- DECO 2000 capacity 7/10mm
- DECO 2000 capacity 13mm
- DECO 2000 basic i capacity 13mm
- DECO 2000 capacity 20mm
- DECO 2000 capacity 26mm
|
|
|
|
Horizontal lathes, Horizontal turning centers
