|
|
| Products 121 to 150 of 252 |
Pfiffner mst
Revolutionary automatic lathe with fixed and sliding headstock with maximum flexibility for machining highly complex precision turned parts from blanks or bar stock.
* max. bar capacities 4/7 mm
* max. spindle movement 50/100 mm
* max. spindle rotating speed 20'000/15'000 t/min.
|
|
TRAUB single spindle bar automatics are suited for machining short parts with diameter up to 36 mm, no matter which level of complexity they have. Optimal accessibility, easy programming and powerful drives are only some of the features, which characterize the TNK series. The simulations use of maximum four tools provides a high productivity.
TNL26K
The fixed headstock version of the proven CNC sliding headstock technology TNL26,with a plus in benefits for economic machining of shorter parts:
- No guide bushing required, reduces setup time and tooling cost
- No precision material required
- Significantly shorter bar remnants
- Chuck work possible for machining of pre-machined or pre-formed parts
|
|
CNC double six spindle machine, counter spindle version for simultaneous front and back working
- 12 separately driven motor spindles with C-axis capabilities
- Speed control for optimal cutting speeds, favorable chip breaking, and short cycle times
- 17 independently working CNC-controlled tool slides, optionally with one or two axis
- Intensive backworking in the same cycle
- Particularly suitable for part families due to flexible setup and fast changeover
- Complete machining with driven tools in all spindle positions
- High dampening effect of hydrostatically guided Z-axis
|
|
Achieve double productivity with the Multiplex series:
Multiplex 4-axis and 6-axis double spindle CNC turning centres offer cost efficient solutions in mid-size lot production with simultaneous operations taking place side by side.
The new Multiplex 3 (Triple) 8200-Y has three turrets and exceptional speed to help minimize workpiece cycle times.
|
|
|
Okuma's broad range of lathes offers a variety of bore sizes, bed lengths and optional features, 427 combinations in all. This variety allows us to create custom lathe solutions capable of meeting any production need. Many parts can be completed on a single machine. The ability to hold tight tolerances eliminates the need for separate finishing or grinding operations. Okuma's industry-leading THINC - OSP Control creates optimal operating efficiency. The Absolute Position Encoder allows for the immediate return to production in case of power loss or other machine interruption.
|
|
|
BUFFOLI is the world specialist in double-production transfer machines for the machining of 2/4 or even 8 parts/cycle (up to over 10,000 nuts/hour; 2,500 parts/hour for elbows, tees and radiator valves).
|
|
Twin-spindle production turning centres
TWIN 42 | unique workroom concept combined with 1g acceleration
The TWIN 42 is available in two frame sizes. The flexible work-area design of the TWIN 32/42 (frame size 1 – spindle-distance 560 mm) with ...
TWIN 65 | More room for more productivity
Following the success of the TWIN 32/42, GILDEMEISTER now also offers the acclaimed work area design of the counter-spindle/tailstock combination for bar diameters of up ...
TWIN 102 | More room for more productivity
Following the success of the TWIN 32/42, GILDEMEISTER now also offers the acclaimed work area design of the counter-spindle/tailstock combination for bar diameters of up ...
|
|
EXCELLENT CHIP DISPOSAL
- Chips and coolant drop straight down to the chip pan without accumulating up on any machine component
- Two spindles with one chip collection point. Optional left or back disposal is also possible.
GANTRY LOADER
- The Most Efficient & economical productions
- Operation can be made for machines and gantry loader with one operation panel.
- Machine and gantry loader minimizes floor space required.
- Reducing non machining time
INDEPENDENTLY OPERATED SPINDLES
- Flexibility means you can run two identical parts, or the first operation and second operation of the same part, or two completely different parts.
|
|
The Most Optimized Lay-out, Twin Spindle Front Loading CNC Turning Center
High power built-in spindle motor was adopted
High rigidity servo turret installment
Thermally symmetrical built-in spindle to prevent heat distortion
Double anchored X-axis ball screw
|
|
Twin-spindle CNC turning-lathes
The Monforts DNC-Line with two turrets and two spindles is a successful integration of two high performance machines in a single machine concept. The main spindles move in Z-axis, automatically transferring the workpieces from the right to the left spindle.
|
|
|
Okuma's broad range of lathes offers a variety of bore sizes, bed lengths and optional features, 427 combinations in all. This variety allows us to create custom lathe solutions capable of meeting any production need. Many parts can be completed on a single machine. The ability to hold tight tolerances eliminates the need for separate finishing or grinding operations. Okuma's industry-leading THINC - OSP Control creates optimal operating efficiency. The Absolute Position Encoder allows for the immediate return to production in case of power loss or other machine interruption.
|
|
|
This precision dual-turning machine combines two GN-3000 high-precision CNC lathes. With the addition of a built-in loader and work-piece stocker, precision 4 inch chuck work can be performed continuously for many hours.
|
|
Without ATC,48 tool Stations for One-hit machining
- 48tools Number of tool stations
- 24tools Number of rotating tool stations
- 90mm Y-axis stroke (Upper turret)
- 6000min-1 Milling speed (Upper / Lower)
- 20HP + 15HP L/R spindle motor
- 7.5HP x 2 Rotating tool motor (Upper / Lower)
- 182degree B-axis positioning range (±91degree)
|
|
M60-G
Technical Data
- Centre distance 2000/3000 mm
- Swing over top slide 670 mm
- Swing over bottom slide 480 mm
- Standard chuck ø 500/400 mm
- Max. power main spindle at 100% duty cycle 40/60 kW
- Max. power counter spindle at 100% duty cycle 40 kW
- Max. torque main spindle at 100% duty cycle 1830/2748 Nm
- Max. torque counter spindle at 100% duty cycle 1830 Nm
- Max. speed main spindle 3300/2600 min-1
- Max. speed counter spindle 3300 min-1
- Max. power milling spindle at 100% duty cycle 17/25 kW
- Torque max. milling spindle at 100% duty cycle 210/300 Nm
- Max. speed milling spindle 4000 min-1
- Max. pressure of coolant through spindle 80 bar
- Swivelling range B-axis -110/+90 degree
- Travel Y-axis 300 (-125/ 175) mm
- Travel X-axis 700 mm
- Steady rest clamping ø max. 160 mm
- Tool magazine 40/80/120 number
- Control: SIEMENS SINUMERIK 840 D type
|
|
H-15D Duplex
Generous 24"X21"X18" work envelope for each of the two opposing spindles, allowing simultaneous machining of two sides of a part on a single setup. Each spindle runs independently or synchronously through GE Fanuc Cimplicity CNC. 15-hp, ISO 40 taper spindle standard with 2000, 3000, or 6000 RPM. Feedrates to 600 IPM (15.24 MPM). 6-tool ATC standard with optional 12-tool ATC for each spindle. Specify the optional 4-position index table for increased productivity. Fourth axis rotary table available for contouring.
|
|
High Speed,High Rigidity & Super Multi-Tasking in a Compact Machine
- Opposed two-spindle, 2-turret construction!
- 48tools Number of tool stations
- 24tools Number of rotating tool stations
- 120mm Y-axis on Upper Turrets (±60mm)
- 3600min-1 Milling speed (Upper / Lower)
- 20HP+20HP L/R spindle motor
- 7.5HP x 2 Rotating tool motor (Upper / Lower)
|
|
- Identical main and counter spindle for complete machining
- Cycle time reduction by simultaneous machining at the main- and counter spindles
- Y/B-axis option for inclined, off-center drilling and milling
- Multifunctional unit with 2 x 32 tools
- High performance milling spindle with 27 kW
- The Duo machine concept is ideal for sequential machining
- Building block system for individual applications
|
|
|
The ABX-51DHY2 and 64DHY2 are "super turning centers" capable of processing high-end parts efficiently in a single setup. Each of the two upper turrets on the left and right side features a Y-Axis control and is capable of having revolving tools attached on all of its 12 stations. A total of 24 tools available, and a large open space provided below the two spindles that minimizes chip problems, help perform trouble-free, simultaneous front and back operations of complex parts in a single machine setup.
|
|
Vertical machining of shafts up to 1000 mm length
The machining of shaft-type components turned on its head.
The VTC is used to vertically machine shafts and shaft-type components of up to 1000 mm length. The EMAG tool turrets allow for 4-axis turning operations and also handle the task of loading and unloading the machine ... and more
|
|
| ... products without technical information |
| |
|
|
Horizontal lathes, Horizontal turning centers
