|
|
Autoclaves 25 to 110 litres
• Very easy to use
• Intuitive programming
• Quicklock rapid opening/closing lid
Steam condenser included.
Polished stainless steel chamber.
Rapid cooling. All models come on wheels.
These autoclaves have been designed to offer user comfort and a maximum performance level.
8 customised programs.
High-precision temperature and pressure monitoring by the dual sensor system.
Safety: CE, TüV, EN 61010-2 (thermolock cannot be opened until the pressure has been equalized and the media temperature has fallen below the reference value).
Complete documentation with optional printer.
|
|
Internal dimensions :
Ø=1000 mm x L=1700 mm
Working temperature : 250°C
Working pressure : 10 bars
Computer system :
By specific software and supervisor
|
|
|
|
|
|
LABORATORY AUTOCLAVES
Priorclave offer a choice of laboratory autoclaves from 40 to 700 litres and above, suitable for a wide range of applications.
They are available in different loading formats; Bench Top, Top Loading, Front Loading, Large Capacity Rectangular. All Priorclave Laboratory Autoclaves include the following unique features:
- TACTROL microprocessor control system, developed specifically for the control and monitoring of Laboratory Autoclaves
- Easy to use, just set the temperature and time required, select any options needed and press start.
- Self-monitoring systems, with pre-set actions for events such as power failure or low water levels and other events. A full log of autoclave activity is held in the system and can be downloaded for diagnostic or monitoring purposes
- High visibility display panel easy to set and use with digital displays providing information on status
- Optional program memory, Printer and Serial or USB connection
- Biocote® Anti-Microbial Surface Coating providing a 2nd line of defence, to minimise cross contamination risks.
- A range of options and accessories to help you to get the most from your chosen model including:
- Vacuum systems for improved air removal
- Drying systems
- Steam and water jackets (rectangular models only) for improved performance
- Baskets, Sterilising Containers, Loading Trolleys etc.
Full spares and service backup from an in-house service team and fully trained distributor technicians.
|
|
|
Autoclave manufacturer for the aerospace and composite industries . Any kinds of diameter from 500 mm up to 8 500 mm.
|
|
Autoclave Sterilization
STERILIZER FEATURES
Integrated PLC monitors and controls the sterilizer cycle, ensuring 100% kill of all bacteria in waste batch.
ASME pressure rated vessel with integral waste tracks for easy loading.
Manual safety door lock bar interlinked to sterilizer controls ensures door mechanism is locked prior to pressurization of vessel.
Pneumatically actuated breech lockdoor and inflatable door seal.
Pneumatic safety lock pin energized by sterilizer control prevents door opening while unit is pressurized.
Single channel circular temperature chart recorder provides permanent documentation of each batch cycle.
|
|
|
|
|
|
Food processing and pharmaceutical industries
LAGARDE® offers a wide range of retorts in all sizes
- STATIC retorts
From a diameter of 1,300 to a diameter of 2000 mm
- PENDULAR -TILTING retorts
- ROTARY retorts
From a diameter of 1,300 to a diameter of 1800 mm
- PILOT units, static or rotary
With a diameter of 900 mm
Other equipments
LAGARDE® offers a range of other associated equipments :
Handling Accessories
- Rectangular baskets and stackable trays or drawers-style structures designed specifically for your packagings
- Trolleys
For sterilising retorts in MANUAL mode
- Lifting Tables manually operated
- Loading systems, either semi or fully automatic for the loading of baskets
- Unloading systems, either semi or fully automatic for the unloading of baskets
- Retorts Supervision
For sterilising “turnkey projects” with fully AUTOMATED retorts installations
- Conveyors and shuttles for the loading and unloading of the retorts and the handling of baskets
- Automatic loading systems
- Automatic unpacking systems
- Retort Supervision
|
|
MAGNABOSCO AUTOCLAVES is a branch of MAGNABOSCO ENGINEERING GROUP
founded in 1960 by Mr. Giuseppe Magnabosco.
The carbon-fibre autoclaves manufactured by our company are the realization of
many studies and researches followed for a long period, focusing especially on heating
process, temperature uniformity, autoclave pressurization and vacuum system.
The first autoclave was built in 1963 and total units manufactured till January 2008
is over 1500, whose more than 300 are for composite materials. We produce some
versatile machines, allowing different types of working, by changing temperatures,
pressures and times very easily.
|
|
Internal dimensions :
Ø=1000 mm x L=1600 mm
Working temperature : 200°C
Working pressure : 10 bars
Control system :
By specific software and supervisor
|
|
Internal dimensions :
Ø=1500 mm x L=3000 mm
Working temperature : 250°C
Working pressure : 10 bars
Control system :
Regulation by industrial programmable controller and supervisor
|
|
Processing parameters with operational temperatures in excess of 600 degrees C and pressures of 68 Bar are available where processes require it. With heating options include electric, oil, steam or Aeroform’s patented, award winning gas fired Radiant Tube Heating Technology that offers energy cost savings of up to 70% over other forms of heating.
|
|
Features:
- Production & Laboratory composite autoclaves
- Sizes from 1' dia. x 3' long to 30' dia. x 200' lng
- Temperatures to 1500 °F
- Pressures to 2000 psi
- CPC computer controls
- Turnkey installation
- Affordable
|
|
Internal dimensions : Ø=1500 mm x L=3000 mm ≡ Working temperature : 450°C ≡ Working pressure : 15 bars
Control system : By specific software and supervisor
|
|
Internal dimensions :
Ø=2500 mm x L=2500 mm
Working temperature : 250°C
Working pressure : 10 bars
Control system :
Regulation by industrial programmable controller and datas safety
|
|
|
Our new range of autoclaves has been carried out, keeping in mind the most advanced technologies to garantee machines of highest working safety, less working costs, short heating times, reduced overall dimensions, long life.
|
|
|
|
|
|
Textile Industry
The original historical sector that LAGARDE® specialised
in and made its reputation Steaming standard autoclaves
of diameters between & 1300 and 1600 and a length adapted to your requirements
Other possibilities created upon specificities
Various applications
- Thermo-fixing of twisted yarns;
- Retraction of synthetic fibres ;
- Preservation of the shape of hosiery items;
- Preservation of dyes and printed designs- Humidity control and moisture recovery
- Two principals of steaming depending on goals researched
Classic steaming process
After an initial vacuum to vent the air excess present in the chamber and to aide the penetration of the steam in the textile material, a direct injection of steam allows the steaming of the textiles in an atmosphere saturated steam.
Steam injection is controlled along with the programmed temperature settings. During the temperature come-up time, an internal exchanger allows the steam to be heated and limits the production of condensation.
Intermediate vacuums to accelerate the penetration of the steam can be programmed. After the steaming, a final vacuum allows the textiles to be cooled and eliminates any excess humidity.
This principal can be used for all textile fibres: natural, artificial, synthetic and mixed.
Steaming process with moisture recovery
After an initial vacuum to vent the air excess present in the chamber and to aide the penetration of the steam in the textile material, a volume of water stored in the bottom of the autoclave is heated by “BUBBLING” or by electrical heaters.
|
|
HMT Series
All HMT steam sterilizers are manufactured at a modern plant using state-of-the-art processes and technologies. All units comply with the Pressure Equipment Directive and all applicate European standards and regulations and bear the CE mark.
While in the case of HMT 232 X, one out of four different sterilization times can be selected, the units of the FA class offer preselected programs with an automatic, microprocessor-controlled program sequence, including an automatic feed water out of the reservoir.
Safety included
All HMT steam sterilizers are equipped with an overpressure protection switch, a safety valve and an overheating protection switch. The door is locked manually by a turning bolt. As a matter of course, the unit is equipped with a water-level monitor for the reservoir and the sterilization chamber, using a visible and audible warning message in case of low water.
|
|
|
|
|
|
BENCHTOP COMPACT 40 PRIORCLAVE LABORATORY AUTOCLAVE
Compact Priorclaves allow flexible operation for the low volume user, usually only available in larger units.
- 40 litre capacity (up to 11 x 1 litre bottles or 7 x 1 litre conical flasks)
- Bench mounting
- More flexible than fixed cycle sterilisers for laboratory and mixed load use
- Fully settable up to 138oC – 2.4 Bar. 1-999 minutes
- TACTROL microprocessor control system with optional 5 or 10 program memory and optional Printer
- BioCote anti-microbial surface coating – unique to Priorclave
- 12 months parts and labour warranty (parts only outside the UK)
- 10 year or 10,000 cycle pressure vessel warranty
- Thermal interlock for safety with liquids in sealed glass containers
- Pressure interlock
- Quickseal Series II single action closure
- Media Warming facility
- Delayed Start facility
- Fan assisted cooling
- Timed Freesteaming
- Thermocouple port and separate test port
- Two stainless steel shelves
- Stainless basket and stainless waste container available
- Operation from standard 13 Amp socket (UK)
- Full range of options and accessories
|
|
|
|
|
|
DOUBLE-DOOR, PASS-THROUGH LABORATORY AUTOCLAVES – CIRCULAR SECTION (380/415V, 10.5kW)
Where a clean room or containment suite is being installed it is often an advantage to install a through-wall autoclave to ensure containment. Priorclave manufacture Pass-through autoclaves with circular chambers in 150L and 200L capacities. Double Door Priorclaves have interlocks to prevent both doors being open at the same time as this would breach the integrity of the site. They also have an interlock to prevent the door at the unloading end from being opened until the sterilisation cycle has been successfully completed and the load is safe to pass into the unloading end.
Pass-through Priorclaves include all the features of the Front Loading Range.
Priorclave are pleased to offer our uniquely comprehensive design and advisory service to help you to correctly specify and design and autoclave to suit your particular requirements.
Each site is different with the requirement for doors to be hinged to swing in different directions and with the location of the required services. Final manufacture therefore requires full details of the proposed location and operation routines. This can be achieved by a site survey by one of our representatives or by the supply of detailed drawings.
|
|
|
|
|
|
Q63 LARGE CAPACITY FRONT LOADING PRIORCLAVE LABORATORY AUTOCLAVE
Designed to give the advantages (more difficult to overload and lower costs) of Priorclave’s cylindrical section autoclaves but with a higher capacity the Q63 autoclave is ideal for autoclaving heavy or bulky items.
- 630mm Dia. Cylindrical Chamber
- 320 Litre Capacity
- 21kW kW electric or direct steam heating
- Fully settable up to 138oC–2.4 Bar. 1-999 minutes
- TACTROL microprocessor control system with optional 5 or 10 program memory
- BioCote anti-microbial surface coating – unique to Priorclave
- Castor mounted for ease of positioning
- Two non-tipping shelves
- 12 months parts and labour warranty (parts only outside UK)
- 10 year or 10,000 cycle pressure vessel warranty
- Thermal interlock for safety with liquids in glass containers
- Pressure interlock
- Quickseal Series II single action closure
- Media Warming
- Delayed Start
- Fan cooling
- Timed Freesteaming
- Thermocouple port and test port
- Stainless steel baskets, waste containers and loading trolleys available
- Full range of options and accessories
- Vacuum models available (liquid ring vacuum pump)
|
|
|
|
|
|
FRONT LOADING PRIORCLAVE LABORATORY AUTOCLAVES
A firm favourite in laboratories throughout the food, drink, dairy, health and pharmaceutical industries, these autoclaves and are particularly useful for autoclaving heavy or bulky items.
Models are available in 100, 150 and 200 litre capacities and for electrical or direct steam heating.
- 500mm Dia. Cylindrical Chamber
- 7 or 10.5kW electric or direct steam heating
- Fully settable up to 138oC–2.4 Bar. 1-999 minutes
- TACTROL microprocessor control system with optional 5 or 10 program memory
- BioCote anti-microbial surface coating – unique to Priorclave
- Castor mounted for ease of positioning
- Two non-tipping shelves
- 12 months parts and labour warranty (parts only outside UK)
- 10 year or 10,000 cycle pressure vessel warranty
- Thermal interlock for safety with liquids in glass containers
- Pressure interlock
- Quickseal Series II single action closure
- Media Warming
- Delayed Start
- Fan cooling
- Timed Freesteaming
- Thermocouple port and test port
- Stainless steel baskets, waste containers and loading trolleys available
- Full range of options and accessories
- Vacuum models available (liquid ring vacuum pump)
|
|
|
|
|
|
Designed For Your Application - Three configurations are available to suit your specific temperature and cycle time requirements. Operating Temperatures to 320° C equate to shortened cycle times which result in higher throughput, higher production rates and lower overall cost; allowing you to use a smaller oven for a given level of production. In addition, the internal air supply panels distribute heat very evenly, resulting in dense loading capabilities and a high capacity per square foot of floor space.
Cycle times can be as short as 1 1/2 hours when equipped with Ultra Performance Filters and 2 1/2 hours when equipped with High Performance Filters. A unique mounting system for the HEPA filters reduces particulate concentrations and stress from thermal expansion and contraction. Despatch guarantees ISO Class 5 condition for all oven configurations throughout the cycle.
Optional touchscreen controls with an Allen Bradley PLC are powerful, yet easy to use. The system collects data for process validation, monitors operations relative to control limits, and communicates with external data processing equipment.
Thorough IQ, OQ and SQ validation packages minimize the time and effort required for installation, start-up and validation (available as an option.)
|
|
|
Used for research, pilot plant, or production applications, AE's Threadless Pin Closure is designed for rapid opening and closing along with high cycle life. To operate the vessel, simply remove the pin and raise the cover. This is a very easy closure to automate. With sizes up to 30" (762 mm) and pressures to 150,000 psi (10,300 bar) this is a versatile design for many applications.
|
|
Selecting an autoclave is an important long-term investment decision. Choosing the right sterilization system will have a positive impact on performance and efficiency. The Touchclave-Lab range is provided with a host of features specifically designed to improve throughput and usability
Touchclave-Lab sterilizers are built to BS2646:1993, BS3970 and HTM2010 (option). All pressure vessels comply with the European PED 97/23/EC and are independently tested to PD5500:2000 Cat 3 along with other international standards. LTE also supplies sterilizers to meet the requirements of many other standards and guidelines, including HTM2031, EN285, cGMP and EN12347. Call our technical team or sales office to discuss your requirements.
|
|
|
|
|
|
New OPAL range of laboratory autoclaves
This entry-level, four option range starts with a 35L Bench-top model and includes 55L and 95L top loading models. A 125L Bench-top model with optional mounting stand completes the range.
They have been specifically designed to perform everyday laboratory autoclaving functions such as growth media preparation and laboratory waste sterilisation. It is intended to enable laboratories, with a more basic need, to perform these operations within their own laboratory to specific requirements, without unnecessary expenditure on additional functions and control systems often fitted as standard on today's autoclaves, for more exacting procedures.
All autoclaves in the range feature automatic free steaming and a thermal safety lock and are managed by a slimmed down version of Priorclave's tried and tested TACTROL microprocessor control system. They will operate up to 138oC - 2.4 Bar.
The models are based around Priorclave's existing product range and so are fully compliant and CE marked in accordance with the European Pressure Equipment Directive (97/23/EC) and other relevant directives and standards.
|
|
Features:
- Economical and powerful
- Sub-scale production, laboratory, or University use
- 22/24" diameter x 48" long
- Standard: 150PSIG @ 500°F
- HighTemp: 200 PSIG @ 800°F
- Lite: 100PSIG @ 350°F
- CPC computer controls
|
|
Autoclave Controls diameter 900mm
- rotary and pendular
- statics
- process vapor air
- process streaming of water
- process immersion of water
- mono, Bi and multi process
|
|
|
|
|
|
RECTANGULAR SECTION VERTICAL POWER DOOR PRIORCLAVE LABORATORY AUTOCLAVES
Perfect for high volume throughput as well as large bulky items, these autoclaves combine a huge internal capacity with a small floor area.
The Priorclave Hydraulic Power Door mechanism enables the door to be opened and closed at the touch of a button.
A fixed door seal is used for reliable, trouble free operation.
- 230, 285, 350, 450 & 700 litre capacities (Intermediate and larger capacities also available)
- 3 Year Guarantee on door seal
- Powerful heaters for shortened cycle times
- 21, 31.5 or 42kW (380/415V) electric or direct steam heating
- Steam Jacketed versions available (steam heated models only)
- Fully settable up to 138oC–2.4 Bar. 1-999 minutes
- TACTROL microprocessor control system with optional 5 or 10 program memory
- BioCote anti-microbial surface coating – unique to Priorclave
- Two non-tipping shelves
- 12 months parts and labour warranty (parts only outside UK)
- 10 year or 10,000 cycle pressure vessel warranty
- Thermal interlock for safety with liquids in glass containers
- Pressure interlock
- Media Warming & Delayed Start
- Fan cooling
- Timed Freesteaming
- Thermocouple port and test port
- Stainless steel baskets, waste containers and loading trolleys available
- Full range of options and accessories
- Vacuum models available (liquid ring vacuum pump)
|
|
|
|
|
|
HMC Steam sterilizers HG 50 / HG 80
Simply press a button to open and close. However, the lid is not just opened and closed. At first it is only opened for about three inches - the first surge of steam is able to escape - then the lid is completely opened and the internal space is ready to use. While the lid is moving to the closing position, it pauses shortly before it is completely shut. When the lid is in the final position, the lock is automatically bolted. The bolt is monitored by two independent safety systems. Thus, it is impossible to open the lock unintentionally if it is under pressure.
Sophisticated yet economical functionality
A large illuminated program display and easy to operate the HG series fulfils every requirement of modern sterilization units and all wishes of the user regarding functionality and comfort. And all that at a sensationally low price!
Clearly arranged
The large program display makes operation simple and instantly shows the most important parameters:
- Sterilizing temperature and pressure
- Sterilization time
- Remaining time until program end is reached
Configurated
3 preselected programs each for:
- Liquids
- AGAR sterilization, including a residual heat cycle
- Solids
- Steam pot programs
Special programs, e.g. for Durham tubes, can be selected without any problems. Timer-controlled night-time program.
|
|
|
|
Autoclaves, Sterilizers, Pasteurizers
