|
|
|
Active brazing alloys are used to braze ceramic materials with stainless steel. Active brazing alloys contain titanium and are always used for furnace brazing with protective atmosphere made by argon or vacuum. Active brazing alloys may be also used to braze alumina and nickel based alloys. Active brazing alloys are delivered in wire, rings, preforms and paste.
|
|
Welding head ta1040
Can be supplied by an automatic distributor, or be used semi-automatically or manually with the 3 standard processes.
|
|
LUSIN
ECO WELDER
Ecological and efficient anti-spatter welding spray
For shielded arc and electrode manual welding. As a separating and protective agent for electrical and inert-gas-shielded welding, preferably in MIG/MAG are welding for workpieces surfaces and welding nozzles.
|
|
Panasonic KF-350 and KF-500
Cost-efficient. Clean. Consistent.
The Panasonic KF series power supplies provide simple, efficient and dependable operation. They are designed to maximize welding performance while minimizing spatter. A special idle power saving circuit also reduces power consumption, which ensures lower operating costs.
For most conventional applications the KF-350/500 has an exceptionally low total cycle cost compared to other welding packages.
Each package incorporates a power supply, wire feeder and remote control pendant.
Features & Benefits
- Includes idle "power saving circuit" - reducing power consumption as well as operating costs
- Runs in low noise level
- Trigger latching capability on long welds to reduce operator fatigue
- Excellent welding performance for Argon mixed gases and 100% CO2
|
|
In 1981 we turned the world of welding on its head by introducing the first commercially-viable auto darkening welding filter. Ever since then, the Speedglas™ brand and the technology behind it has been the standard to which others aspire.
The Speedglas 9100 is an ideal shield for the professional welder - a shield with optimised protection, comfort and performance.
|
|
|
|
|
|
XVP Variable Shade #9 - 13
Good for low-amperage TIG applications
- Reaction time is 1/16,000 sec.
- Auto-darkening shade, lens sensitivity and delay controls are internally adjusted
- 2 independent arc sensors provide continuous arc-sensing capability
- Battery powered with solar-assist (replaceable lithium battery)
- Ratchet-style headgear features CoolMax® odor-absorbing sweatband
- 5 front lens covers and 2 back lens covers included
- Meets ANSI Z87.1-2003/DIN/CSA/TUV/CE standards
XVS Variable Shade #9 - 12
Ideal for Home and Farm Applications
- Reaction time is 1/12,000 sec.
- Auto-darkening shade, lens sensitivity and delay controls are internally adjusted
- 2 independent arc sensors provide continuous arc-sensing capability
- Battery powered with solar-assist uses 2 replaceable AAA batteries
- Ratchet-style headgear features CoolMax® odor-absorbing sweatband
- 5 front lens covers and 2 back lens covers included
- Meets ANSI Z87.1-2003/CSA/CE standards
XFS Fixed Shade #10
Ideal for Light Duty Applications
- Lens darkening (#10) reaction time is 1/3,600 sec.
- 2 independent arc sensors provide continuous arc-sensing capability
- Solar-powered lens uses non-replaceable lithium battery
- Ratchet-style headgear features CoolMax® odor-absorbing sweatband
- 5 front lens covers and 2 back lens covers included
- Meets ANSI Z87.1-2003/CSA/CE standards
Standard Fixed Shade
Non-Auto-Darkening Welding Helmets
- Fixed-shade (#10) for arc welding
- Built from polypropylene plastic for durability
- Fully adjustable ratchet headgear to allow for quick and easy adjustments
|
|
Scanorama:
Ideally suited for Mig and Tig applications, up to 250 amps, using Argon shielding.
Eye-Tech 5-13:
Push lock ratchet knob with five (5) different adjustment levels for the welder's personal requirement.
Eye-Tech 11 Mono:
Application ranges: Electrode welding - Mig/Mag; Restricted for laser welding and oxy-gas welding.
|
|
A new concept!
With the new helmets in the professional range, welders will be able to customise their welding helmet for personalised protection. All coloured Optrel p500 helmets are delivered with one pair of side covers, that are exchangeable and replaceable. Sperian Protection can supply a collection of side covers to personalise your helmet!
Optrel p550: The new DIN 4/9-13 helmet out of the Sperian Professional-line meets all sorts of needs: safe protection, comfort, individual design and consistent quality make the Optrel p550 an optimal working tool for professional and occasional welders. In addition to the infinitely variable shade level from 9 to 13, the helmet offers a infinitely variable sensitivity and delay function. This guarantees a maximum on comfort and absolute efficiency.
|
|
The helmet Optrel e680 - based on the previous model Optrel Satellite - has been designed specially for welders with varying job requirements and a need for an extensive range of individual adjustment options.
The features include protective levels from DIN 5 to DIN 13 and various additional options that provide the welder with absolute freedom and unrestricted comfort.
The enlarged field of view (+ 33%) and true color filter allows the welder a brilliant, detailed view of the welding object.
|
|
The Optrel OSC has been on the market for more than 10 years and is still number one with many welders. The simple, but pleasing shape of the OSC, together with the high quality DIN 9-13 cartridge, offers long-lasting and reliable protection.
Thanks to the large protection level knob on the outside of the helmet, the protection level can be changed easily without removing the helmet even when wearing gloves.
|
|
A new concept!
With the new helmets in the professional range, welders will be able to customise their welding helmet for personalised protection. All coloured Optrel p500 helmets are delivered with one pair of side covers, that are exchangeable and replaceable. Sperian Protection can supply a collection of side covers to personalise your helmet!
Optrel p530: The new DIN 4/11 helmet out of the Sperian Professional-line meets all sorts of needs: safe protection, comfort, individual design and consistent quality make the Optrel p530 an optimal working tool for professional and occasional welders. In addition to the shade level 4/11, the helmet offers a infinitely variable sensitivity and delay function. This guarantees a maximum on comfort and absolute efficiency.
|
|
Welding requires complete concentration. This is no problem with the Optrel e670 - the successor model of the Optrel Orion: the unique sensor technology allows the welding cartridge to automatically select the protection level and constantly adapt it to the welding application using the intensity of the arc during the welding process.
The user can select “Auto” or “Manual”. In the “Manual” setting, the user can select the protection level that is best for him. He can adjust the shade setting as required to ensure the most comfortable shade level at all times.
If the welder selects “Auto”, the helmet automatically adapts the protection level to the current arc intensity. He can also use the fine adjustment to adjust the automatically selected protection plus or minus one shade level to satisfy his individual needs without the fear of any problem of eye damage. The enlarged field of view (+ 33%) and true color filter allows the welder a brilliant, detailed view of the welding object.
|
|
|
The new 9-13 helmet out of the Sperian Expert-line meets all sorts of needs: comfort and customization possibilities, a large viewing area and consistent quality make the Optrel e650 an optimal working tool for most welding processes. Additional to the infinitely variable shade level from 9 to 13, the helmet offers a sensitivity and delay function, adaptable from the outside of the helmet. This guarantees a maximum on comfort and absolute efficiency for every welder.
|
|
Standard functions in a top quality helmet.
Thanks to the extremely high quality filter and the use of the Expert helmet shell, the welder benefits from excellent optics, shade selection plus comfort and protection advantages.
The welder can select the protection level according to his requirements using the slide switch on the rear of the cartridge. It can be set to either DIN 10 or DIN 11. The detection angle for ambient light can be selected using the sensor bar.
|
|
BEAUVERGER offers over 50 years experience in the field of welding protection screens.
BEAUVERGER designs and manufactures all its products in its manufacturing unit located in Béziers. Thanks to a major innovation effort, its products are evolving constantly, and integrate the most sophisticated techniques, including liquid crystal masks. This knowledge is recognized by users in many industrial fields: automotive, metal construction, foundries, oil industry, etc.
|
|
|
Italbras Brazetec manufactures brazing alloy foils and tapes. Any silver brazing alloy, AgCuP alloy and CuP alloy is available. Italbras BrazeTec manufactures also three foils with and intermediate layer of copper. Foils are used in tools industry and three foils are mainly used to produce tools for wood cutting.
|
|
|
Fusion Paste Brazing Alloys contain finely atomized filler metal, a fluxing agent, and a paste-like binder. Each of these components has a unique function to perform when blended into a Fusion Paste Alloy. All pastes are designed to be automatically dispensed to control costs and yield superior part joint quality.
|
|
|
Italbras BrazeTec manufactures brazing pastes containing or not containing flux. Nickel brazing pastes are used to braze stainless steel in furnace with protective atmosphere and they are mainly used by EGR coolers producers. Copper pastes are used to braze any kind of steel, especially towel radiators. Copper-phosphorous pastes are used to braze copper heat exchangers. Also silver brazing alloys pastes are available.
|
|
|
Brazing alloys rings and pre-forms using any king of silver brazing alloy containing or not containing cadmium and especially AgCuP and CuP alloys. Any kind of geometry can be manufactured.
|
|
|
Italbras BrazeTec manufactures brazing alloy wires on spools or coils. All silver brazing alloys containing or not containing cadmium, AgCup alloys, CuPalloys and Aluminum-silicon alloys are available. Wire diameters are from 4mm to 0,20 mm. Spool weight is from 15/10 Kgs to 200 grams. Wire may sometimes be cored by brazing flux.
|
|
|
The brazing flux is the key element in the brazing process. Brazing fluxes allow to clean the metals’ surface from oxides and to protect metals during heating process. Brazing alloys can wet metals and join them only if surfaces are clean from oxides. Due to this reason, it’s important to choose the right brazing flux for each application. Italbras manufactures any kind of brazing fluxes: paste, powder, liquid, gel. There are fluxes for soft brazing using tin alloys, brazing fluxes for hard metals and tools, brazing fluxes for induction or furnace brazing processes.
|
|
Gullo ceramic weld backing is a cost effective reliable material for producing x-ray quality back beads without costly grinding or gouging and rewelding. All Katbak ceramics have knuckle joints for use on flat or curved surfaces.
- Impart X-ray quality back beads on root pass
- Weld one side only
- Deposit more weld metal
- Root weld and fill in one pass
- Eliminate defects and re-work
- Eliminate costly unnecessary gouging and grinding
This exclusive ceramic backing material enables X-ray quality root welds in one pass, full penetration welding from one side and uniform backbeads of finish quality. It is available in a variety of shapes and formats to suit most welding applications. Gullco KATBAK is available on self-adhesive foil tape for easy, accurate application. The use of Gullco KATBAK can significantly reduce weld costs by eliminating the need for costly grinding, gouging, re-working defects and re-welding.
|
|
TECHNICAL DATA :
o Input AC: 230VAC, 6A
o Head width : 40 mm
o Weight : 3.1 Kg
o Thermal protection through a temperature sensor
o Speed range: 0.41 to 10 rpm
o Cable length: 5 M
o Duty cycle: 100A at 100%
o Electrodes: Ø1.6 and Ø2.4 mm
o Clamping jaws: one set of 6 parts per diameter
o Material of the jaws: malleable stainless steel
Delivered with :
· 1 five meter-long cable
· 1 set of jaws
· 1 drive box 90W
· 1 five meter-long sheathed extension cord for the remote control
· 1 maintenance kit
· 1 control cable
Important :
· To be used with the SASL-150T power source
|
|
From high-purity environments to general construction to plant utilities maintenance, meeting ASME-BPE 2002 welding standards, especially when working in confined areas, is a challenge. The Swagelok orbital welding system’s unique modular fixturing provides the versatility to weld numerous tubing and component combinations required for system fabrication.
|
|
Dual Guard(TM), Heavy Duty Cutting, Welding, and Heating Outfits
Dual Guard(TM), Heavy Duty Cutting, Welding, and Heating Toolbox Outfits
Dual Guard(TM), Heavy Duty Hand Cutting Torch Outfits
Dual Guard(TM), Medium Duty
Tough Cut(TM), Medium Duty
Tag-A-Long(TM), Portable
Versa-Torch®, HVAC/R
Quickbraze®, HVAC/R
Versa-Torch® Standard Tip Selections
Versa-Torch®/Quickbraze® Tip Selections
Handi-Heet®, Soldering & Brazing
Silver Smith(TM), Soldering & Brazing
The Little Torch®, Jewelry/Hobby
The Little Torch®, Jewelry/Hobby Caddy Kits
The Little Torch®, Jewelry/Hobby Tips and Technical Information
|
|
Design:
- Hand torches for flame cutting up to 500 mm
- Hand torches for flame gouging
- Special versions for scrap cutting
- Different sizes and different length
- Available with DIN, BS and CGA connections
- For all fuel gases
Advantages:
- Valve-forward design ensures maximum operator safety
- New valve design guarantees higher gas flow rates and enhanced cutting capacity
- Heavy-duty head avoids overheating
- New monoblock valves improve operator control and allow precise adjusting also with gloves
- Triangular arrangement of stainless steel tubes provides high durability and maximum stability
- Modular design (also with STARLET and STAR torch systems) reduces maintenance cost and downtime
Product Range:
- Hand torches for flame cutting
- Hand torches for flame gouging
- Scrap cutting torches
- Accessories, wearing parts
|
|
Electrical compacting head, type CEP018.
- Compacting process according to an industrial patent from the company technax.
- Compacting of components, like copper braid, cable, strand, etc.
- Compacting sections from 0.2mm² to 2 mm² max.
- Head to be connected on a manual station or an automatic welding machine.
|
|
The quality of spot welding depends on the force applied by the electrodes as well as on the intensity of the welding current. Within such a control program, the measurement of the force applied by the electrodes is extremely important for ensuring constant production.
That is why we have developed this equipment to measure the closing force of the grips that may be used during the final stage or during periodic maintenance. The end-pieces are interchangeable and can be used to measure force with various shapes of electrodes, the minimum closing dimension being 0.12 in.
This new instrument leverages the robustness, quality and precision of the Centor instrument family, which are specially designed for mobile use in a production workshop.
|
|
|
|
|
|
Testweld™ KR1000 Robot Welder Force Monitor (For measuring electrode force on resistance welding guns)
ADVANTAGES:
• Robot checking of Electrode Force
• No need to stop robot cells for force checking
• Very fast payback
• Alerts operators to immediate faults & variations
• Can eliminate scrap due to weld deterioration
• Reduces equipment damage and wear
• Keeps force within preset limits
• Gives early warning of equipment deterioration
• Continuous robot operation via go/no go signals
DESCRIPTION - KR1000:
Stand alone analogue output force sensor. Supplied for direct plug and play replacement to commonly existing units.
The target pads remain spatially the same. Robot reprogramming for test position is not required.
The monitor is preset to Zero on no load but can be simply adjusted by the user if required.
The innovative design of the KR1000 force head makes it far less susceptible to errors induced by electrodes not being perpendicular to the target pads.
Exacting construction standards guarantee this instrument is of greater accuracy than other monitors of this kind.
Multiple testing during construction further assist in achieving the superiority that we have set out to achieve.
When coupled to its onboard electronics package the sensor is preset for zero load & calibrated
to a known (NPL) standard.
The KR1000 is robust, durable, reliable, and accurate. KR1000’s have been installed on Car Manufacturing lines since 2005 and have been in constant use without failures.
|
|
|
|
Welding accessories and equipment
