|
|
LAM3 linear actuator
Features
24V/12V DC motor
Aluminum Alloy housing
Low noise; compact size
Built-in limit switches (factory pre-set)
Can be equipped with potentiometer
With 10k/10 turns
25% duty cycle
Ambient temperature:-15-+60
Protective class: IP52, IP65
Free maintenance
|
|
ALI2P
ALI2P F (with integrated limit switches)
Max force: 3.500 N
Max speed: 30 mm/s
Stroke: up to 700 mm
12 24 - 36 Vdc
Accessories: magnetic limit switches, integrated limit switches,
rotative potentiometer, encoder, safety nut
|
|
The RACO COMPACT is designed with extremely small dimensions, although it has high linear thrust. Like the %u201Chigh performance series%u201D it also operates completely electro mechanically in a absolute trouble free manner.As a many-faceted electric cylinder for horizontal or vertical linear thrust and tension movements, it offers a smart solution for a great variety of applications with features as listed below.
Features & Benefits:
Robust industrial and compact design
Wide range of performance with many options
Suitable for applications with a high number of switches per period
Low weight for easy installation in your design structure
High reliability and positioning accuracy
Low noise for special noise requirements
Integral closed loop operation available
Maintenance-free through lifetime lubrication
|
|
This compact, lightweight yet sturdy and versatile acme actuator is a clevis to clevis mount unit, it is commonly utilized in many applications including; food service, office, home entertainment and automotive just to name a few
Features:
Available in Strokes ~ 2 to 12 inches (custom lengths available)
20% Duty Cycle - typical (1 on / 4 off)
Factory set Limit Switches
Feedback ~ Potentiometer or Hall Effect
Load Rating ~ Up to 200 lbs. compression and tension.
0.23 to 2.2 inches per second
clevis to clevis mounting
Thermally protected motor
Lifetime lubrication
Designed for outdoor use
Available in 12 and 24v PMDC type motors
RoHS and IP65 available
|
|
Zaber's latest line of micro linear actuators is capable of twice the speed and thrust of our T-LA series actuators. The T-NA actuators are also smaller, have better accuracy and resolution, and are more robust than previous designs.
Designed to replace standard micrometers on manual translation stages, T-NA actuators come with a built-in controller and is compatible with Zaber's entire line of T-series products.
|
|
|
The Model 8330 Picomotor actuator Ultra was designed specifically to minimize contamination and outgassing in clean-critical environments including vacuum ultraviolet (VUV) and extreme ultraviolet (EUV) applications. A special sealed bellow ensures the cleanliness of the actuators throughout its travel range. The actuators are ideal for precision motion-control and beamsteering applications in the semiconductor industry or in scientific laboratories down to pressures as low as 10- 9 Torr.
|
|
PQ Series
Ideal for applications requiring precise positioning, Firgelli's PQ series of micro linear actuators offer closed-loop control of the actuator's stroke position along it's full length of travel. We can also customize our standard PQ-12 to meet the requirements of your specific application.
PQ12 Compact form factor, feedback position control, 45 N maximum force. Standard configurations are PQ-12s (high-speed) and PQ-12f (high-force). Other speed/force combinations and voltages are possible by special order, minimum order quantities apply.
|
|
L Series
Firgelli's new L series of micro linear actuators combine the best features of our existing micro actuator families into a highly flexible, configurable and compact platform.
L12
The first member of the L series, the L12, is an axial design like the LS-series, but utilizes a more powerful drive and a rectangular cross section for increased strength. But by far the most attractive feature of this actuator is the broad spectrum of configurations in which it will be available:
* 4 Stroke lengths of 10mm, 30mm, 50mm or 100mm
* 3 Force/Speed combinations with 50:1, 100:1 or 210:1 gear ratio.
* Interface options include RC Servo, Industrial servo (4-20mA or 0-5V control)), raw potentiometer position feedback, end of stroke limit switches.
* 6V or 12V operation
|
|
LS Series
The LS series of miniature linear actuators incorporate Firgelli's patent-pending integrated positional limit switches and force overload shutoff capability. The micro actuator housing is cylindrical, and available in either stainless steel or plastic. This micro linear actuator is ideally suited to cost-sensitive, high volume consumer product and robotic applications. Nothing else comes close to the LS series' combination of small size, high performance, and low cost.
LS6
6 mm diameter cylindrical micro linear actuator, 5 N maximum force.
|
|
KUMIRI
Miniature electrically powered cylinder for microscopic feeding
Features
Ultra-compact, small-stroke, rod-type actuator.
Ideal for applications such as electrically powering micrometer heads.
Precision lead screws are used, enabling high accuracy and high resolution.
Plastic parts are used, enabling low-cost construction.
Available with two-phase and five-phase stepping motor specifications.
|
|
DRL Series Compact Linear Actuators
The DRL Series of compact linear motion actuators use a new 5-phase stepping motor which incorporates a ball screw. These are combined with 5-phase 24 VDC microstepping drivers with photocoupler inputs for extremely precise positioning.
|
|
Venture provides a full service design capability for products in our areas of expertise. Variations of products can always be accommodated to support your special needs.
Basic Options
Strokes ~ 2" to 72"
Motor types ~ 110 VAC, 220 VAC, PMDC, and DC stepper
Various ratios available in gear drive, worm drive and belt drive
Feedback ~ Reed, Hall Effect, Potentiometer and encoders
Most available with limit switches, clutches or both
Various tube and end mounting options available
|
|
|
The EMA series of electric actuators are available with Machine Screw and Ball Screw drives . They are suitable for low load, medium duty and high speed applications with dynamic ratings up to 10kN and 5500 mm/min.
|
|
Venture Ball Screw Actuators combine a highly efficient long life Ball Screw with a DC voltage electric motor providing a high performance ready to install electric linear drive system.
Standard strokes 4, 8, 12, 18, 24, 32, 36, and 40 inches (custom lengths available)
30% duty cycle motor rating
Available options;
Clutch
Limit switches
Reed, Hall Effect, Potentiometer and other sensor options
3000 lb static capacity / 1500 lb dynamic compression or tension
Lifetime lubrication
Designed for outdoor use
Compression or tension loads
Trunnion, Clevis, or Tube clamp mounting
High strength steel tube assembly with all-steel load support members
Efficient, long life Ball Screw
12VDC, 24VDC, 36VDC, 90VDC, or 120VDC for use with Rectified 120VAC Gearbox Design
|
|
|
|
|
|
The Eliminator HD™ Heavy Duty ball screw linear actuator provides a strong, durable, and precise linear motion actuator for industrial automation.
The Eliminator HD™ ball screw actuator converts the latest motor technology into high load, high speed, and high accuracy linear motion. Eliminator HD™ replaces hydraulic and pneumatic linear actuators, cams, levers, and linkages, with controllable motion, repeatable position, and easy adjustment.
E-DRIVE Design, Incorporated has shown consistent success in the toughest applications, e.g. High loads, high speeds, high precision, and extreme durability. Precision ball screw systems, tailored for maximum life, load and speed, provide the motion while fully enclosed, thus eliminating contamination related failures. A long bronze nose bearing provides support for the extended piston. Rugged bronze keys in opposing steel slots provide anti-rotation and counter the tangential forces created during high speed, high frequency, and high load operation.
While other actuator designs force a particular motor decision, the Eliminator HD™ is designed to suit virtually any motor, gear box, or gearhead the customer chooses to use. In-line as well as parallel offset configurations are standard with 1:1 and 2:1 synchronous gearbelt ratios available.
Dual, nonferrous dovetail switch tracks provide a simple method of placing and adjusting switches for over travel protection as well as "home" detection. Hall effect type limit switches are available.
|
|
Duff-Norton manufactures SuperCylinder electric cylinders. We offer the industry's broadest range of high capacity electric cylinders. From 2 tons to 25 tons, choose from clevis or trunnion mounting; offset, right angle, parallel, in-line mounting; standard or stainless steel housings, with speeds ranging up to 380 inches per minute.
Duff-Norton electric cylinders are specially designed for a variety of commercial and industrial applications. They are used for opening and closing, tilting and pivoting, lifting and lowering and positioning. Applications include gates, dampers, oven doors, processing tank doors, antennas, orthopedic tables and other medical equipment, ergonomic furniture, and agricultural equipment, etc. Custom designs are also available for special applications. SuperCylinder electric cylinders are also being used to replace pneumatics and hydraulics when high maintenance costs and environmental problems (leaking hydraulic oil) are a concern.
|
|
Based on modified hybrid stepping motors, our AxialPower Plus motors are capable of producing linear forces up to 800 pounds and resolutions up to 0.000125" per 1.8 step. The reliability and precision of our AxialPower Plus and L3 motors come from using only the highest quality parts. We use stainless steel to increase the durability of our actuating leadscrews. And our internal rotating nuts are made from a range of engineered polymers for low-friction, smooth operation.
For applications needing a little more force, try our L3 linear actuators.
|
|
Extreme compact linear actuator with trapezoidal spindle and internal limit switches
- 5 sizes, many options
- up to 25 kN stroke force
- stroke speed up to 181 mm/sec.
- stainless steel and IP65 is standard
|
|
Electric motor solution for the individual sit-stand work station. Stepless height adjustment with customer specific stroke.
- drive for the assembly in the table base
- simple mounting
- integrated position measuring system
- single telescopic function
- synchronisation with up to 26 actuators
|
|
LAP linear actuator
features:
Load range of LAP series:
Load capacity from 40kg to 2.5 tons
Speed range: the highest speed is 93mm/s
Precision control: multi-point positioning,
The positioning accuracy can reach 0.1mm.
Modularized combination: modularized
Combination with various types of motors
and accessories
Others: self-locking, synchronous,
easy maintenance, low noise
|
|
|
|
|
|
LINAK is the world's leading manufacturer of electric linear actuators. Thus, actuators are a crucial part of LINAKs product range.
LINAK has more than 25 years of experience in developing and manufacturing 12 V DC and 24 V DC actuators.
Electric linear actuators are electromechanical units that convert low DC voltage from a control box into a linear movement. An electric linear actuator from LINAK consists of three main elements; a motor, a gear and a spindle including a nut.
A complete actuation solution for linear movement will include a control box and possibly more accessories - like for example hand controls.
Electric linear actuators from LINAK are found in innumerable applications throughout the world. LINAK provides linear movement solutions in applications as diverse as
hospital and care beds
industrial machining, automation and construction
height adjustable desks and tables
comfort furniture
switchgear automation for electricity distribution networks
and more
All vital parts are designed and mounted by LINAK.
The capacities of the actuators range from 200 N - 12,000 N.
Some actuators are built for high temperatures or harsh conditions.
Others can be delivered in protection classes up to IP 66, which means splash and waterproof. It all depends on the type of application.
Actuators are available in black and grey.
We are present all over the world.
|
|
L02 L03
Max Force: 2.000 N Max Force: 5.000 N
Speed: up to 100 mm/s Speed: up to 30 mm/s
Power supply: 12 - 24 Vdc Power supply: 12 - 24 Vdc
Stroke: up to 800 mm Stroke: up to 700 mm
Accessories: magnetic limit switches, encoder, safety nut
|
|
ALI1P
ALI1P F (with integrated limit switches)
Max force: 2.500 N
Max speed: 17 mm/s
Stroke: up to 300 mm
12 - 24 - 36 Vdc
Accessories: integrated limit switches, encoder
|
|
ALI1
ALI1F (with integrated limit switches)
Max Force: 1.200 N
Speed: up to 90 mm/s
Power source: 12 - 24 - 36 Vdc
Stroke length: up to 300 mm
Accessories: integrated limit switches, encoder
|
|
EC1 EC2 EC3 EC4 EC5
Max force: 5 KN // 50 kN
Max speed: 230 mm/s // 15 mm/s
Stroke: up to 650 mm / / 1800 mm
1ph-3ph Vac
Accessories: integrated limit switches, rotative potentiometer, encoder, hand-wheel
|
|
ALI5 90 Version
ALI5 P parallel Version
ALI5 A in line Version
This new family of actuators allow a large number of combinations Forse - speed - dimensions - duty cycle, to meet most applications riquirements.
Max force: 15 kN
Max speed: 250 mm/s
Stroke: up to 1400 mm
1ph-3ph Vac - 90 Vdc
Accessories: magnetic limit switches, mechanical limit switches, encoder, safety clutch, safety nut
|
|
ALI3
ALI3F (with integrated limit switches)
Max Force: 6.000 N
Speed: up to 35 mm/s
Power source: 12-24-36 Vdc / 230-400 Vac 50-60 Hz
Stroke length: up to 700 mm
Accessories: magnetic limit switches, integrated limit switches,
rotative potentiometer, encoder, safety nut
|
|
EZC-Series Motorized Cylinders
Power supply: 200 - 230 VAC or 24 VDC
Marking: CE
Dimensions: 42 (w) x 42 (h) mm
Stroke: 50 - 300 mm
Max. thrust force: 140 N
Max. speed: 600 mm/s (200 - 230 V AC-type), 600 mm/s (24 V DC-type)
Max. horizontal transportable mass: 30 kg
Max. vertical transportable mass: 14 kg
Dimensions: 60 (w) x 60 (h) mm
Stroke: 50 - 300 mm
Max. thrust force: 400 N
Max. speed: 600 mm/s (200 - 230 V AC-type), 600 mm/s (24 V DC-type)
Max. horizontal transportable mass: 60 kg
Max. vertical transportable mass: 30 kg
|
|
Electrical Actuator Microwin
SUPPLY VOLTAGE 1224V
NO LOAD SPEED 336MM/S
NOMINAL LOAD 1001200N
DUTY CYCLE S3 3080%
STANDARD STROKES
50-100-120-150-200-250-300
|
|
ELECTRICAL ACTUATORS
Supply voltage 1224V
No load speed 336mm/s
Nominal load 1001200N
Duty cycle S3 3080%
Standard strokes
50-100-120-150-200-250-300
|
|
|
|
Electric linear actuators
