Pipe and hose accessories

An economic and compact source of amplified air, or nitrogen, for high pressure industrial applications. Haskel air pressure amplifiers offer the most comprehensive operating range in the industry, combining simple principles of operation ...

The Air Pressure Amplifiers of the AA Series are single-stage, single-acting amplifiers that have the capacity to yield a total pressure outputs of 4,500 psi or 310 bar.

Double acting, single stage air pressure amplifier with pressure outputs 4,500 psi (310 bar). Pumps twice the volume per cycle of AA series. Requires less air drive since the inlet air pressure itself provides a substantial portion of ...

F9.428 Coupling elements F9.428 Coupling elements build-in type and threaded-body type max. operating pressure 300/500 bar nominal diameter: ND 3 .. 8 max. flow rate: 8 .. 35 l/min coupling stroke: 4.5 .. 7.4 mm max. coupling ...

Diameter: 5 mm - 8 mm
Operating pressure: 0 bar - 300 bar

F9.440 Multi-couplings F9.440 Multi-couplings depressurised coupling or coupling against pressure max. operating pressure 300 bar nominal diameter: ND 5 .. 8 coupling stroke: 4.5 .. 7.4 mm max. coupling force 4.0 .. positioning ...

Pressure: 125 bar - 500 bar
Flow rate: 0 l/min - 8 l/min

D8.753 Intensifier 21 cm3 D8.753 Intensifier 21 cm3 Intensification ratio 1:4 max. operating pressure 500/125 bar single and double acting intensification volume: 21 cm³ max. flow rate: 8 l/min (low-pressure side) max. operating ...

Diameter: 20 mm - 100 mm
Operating pressure: 16 bar

Structure: • stator (outer part) and rotor (inner part) joined by a single-row ball bearing • for-life lubrication provided in the factory • welded connection parts: welding ends, pipe bends or flanges Materials: • basic unit: ...

Diameter: 125 mm - 700 mm
Operating pressure: 10, 16 bar

Structure: • stator (outer part) and rotor (inner part) joined by a two-row ball bearing • for-life lubrication provided in the factory • welded connection parts: welding ends, pipe bends or flanges Materials: • basic unit: 1.7225 ...

Diameter: 20 mm - 150 mm
Operating pressure: 16, 40 bar

Structure • stator (outer part) and rotor (innerpart) joined by a two-row ball bearing • for-life lubrication provided in the factory • welded connection parts: welding ends, pipe bends or flanges Materials: • basic unit: 1.7225 ...

The 62.000 serie are stainless steel AISI 316L threaded adaptors. Large range of configurations: nipple, reductions, T, L, etc. High performances in pressure (140 bar) and temperature (-110°C +300°C). Threads BSPT, BSPP & Metric. Main ...

Diameter: 20 mm - 63 mm
Length: 56 mm - 106.5 mm

Main advantages - Separation system for the condense - Easiness and quickness of assembling - Reliability and security - High flow rate - Wide range of accessories - Fire resistance: The system does not stroke or propagate any ...

Diameter: 168, 110, 80 mm
Length: 247, 168, 167, 384 mm

Main advantages - Separation system for the condense - Easiness and quickness of assembling - Reliability and security - High flow rate - Wide range of accessories - Fire resistance: The system does not stroke or propagate any ...

Diameter: 32 mm - 125 mm

90° manifold for direct fitting to the blower/exhauster body.

Meter-Bus (M-BUS) is the main bus used for energy metering and intelligent meter management, i.e. separate recording of heat, water, electricity and gas consumption. The Z-MBUS adapter allows us to interface M-BUS networks via RS232 ...

Diameter: 16 mm - 110 mm
Length: 31 mm - 106 mm

Connections - solvent socket – female thread Approvals - EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission

Diameter: 12 mm - 63 mm
Length: 33 mm - 71.5 mm

reinforced Pressure rates - PN16 Connections - solvent socket – solvent spigot – female thread Approvals - EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission

Diameter: 20 mm - 63 mm
Length: 35 mm - 77 mm

Pressure rates - PN16 Connections - solvent socket – solvent spigot – female thread Certificates - EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission

Universal PROFIBUS Interface with USB High Speed High performance PROFIBUS USB interface for a wide variety of tasks from network configuration and device parameterization to plant maintenance and production data acquisition. Handy ...

Diameter: 0 in - 7 in
Temperature: -40 °C - 280 °C

Pig's Tail Spiral Protective Wrapping The PTPW Series of Pig's Tail spiral protective wrap provides heavy-duty protection for hydraulic and pneumatic hose, preventing damage and wear. The unique rounded and beveled edges make the wrap ...

HB Series hose-bend restrictors reduce bending stress near the hose-coupling junction. Added protection prevents damage to the hose and extends its life cycle Upper lip firmly attaches to the coupling, holding the restrictor in place, ...

Diameter: 323 mm - 2,032 mm

For pipes up to 80 inch 90% of the root can be welded Pipe range OD: 12 - 80 inch Available in a medium, heavy and heavy-duty version Edge misalignment can be eliminated by means of jackscrews The air gap can be adjusted by means ...

Diameter: 88 mm - 508 mm

External Pipe Alignment 80% of the root pass can be achieved without loosening the centering Pipe range OD: 3 - 48 inch Available in a light, medium-duty (with bridges) and medium-duty (without bridges) version For tacking or pipe ...

Diameter: 10 mm - 140 mm

Each pipe side is centred by means of a crank Can align different pipe diameters with each other 2 types available, for pipes from 0,3 - 5,5" Stainless steel contact points to avoid corrosion The practical double external pipe clamp ...

Pronal diaphragms are flexible circular rubber jacks. These jacks are installed in the legs of offshore platforms and assist the buoyancy of the fixed platform, while also maintaining its center of gravity when it is installed at sea. Our ...

“OHP & OPV” stoppers are capable of plugging all types of pipeline (Concrete, steel, HDPE, stainless steel…). They have been designed to withstand strong back pressures of up to 35 bars and even more on request. This is why they can be ...

Because Pronal is concerned in environmental protection, we have developed a range of stoppers to contain any accidental pollution that could be released following an incident. Pronal anti-pollution stoppers are permanently installed ...

DN: 40 mm - 200 mm

Material of the elbow - Steel DIN 2448 St 37, primed Design of the inner layer - coated Material of the inner layer - Polyurethane Properties Colour - Colour of lining natural beige Other - Lower operating costs due to longer ...

Hose diameter: 40 mm - 900 mm

Screwable clamp for attaching all hose types from the Master-Clip series to mobile and stationary systems Specification of the connection solution - largely tension-resistant and largely leak-proof connection due to bridge profiles Clamp ...

Hose diameter: 75 mm - 507 mm

Description, addition to product name - Special clamp for attaching all hose types from the Master-Clip series to mobile and stationary units. Construction / Material Specification of the connection solution - largely tension-resistant ...

If motion sequences at customer's site cannot be used to connect the multi-coupling as well, they must be equipped with its own actuation. Pneumatic or hydraulic cylinders are used for this purpose. Function: If there is no feed to ...

Manually operated multi-couplings without connection assistance are available in plug-type design (fluidic-multi-coupling), compact design, as coaxial coupling or in plate mounting. Applications: Pneumatic measuring, control and monitoring ...

1/4"BSP male to various female hand-tight quick connectors (10 pc). - M20X1.5 male to various female hand-tight quick connectors (10 pc). Designed for all pumps except Additel 949 pump Can be ordered as an entire kit or as individual ...

1/4HP male (Autoclave M-250-C) to various connectors Designed for Additel 949, 959, and 960 pumps Can be ordered as an entire kit or as individual parts (see datasheet) /4HP male (Autoclave M-250-C) to various connectors as follows ...

Input connectors and adapter cables •Universal Adapter Cable with Free Ends •MU Connector for Plug-In Boards with 64-Pin Spring Contact Strip •Digital Input of Third Party Device to ALMEMO® Device •Designs and specifications see data sheet

Enlarger - : - Nickel Plated Brass O-ring - : - NBR Connection thread - : - Metric (EN60423)/PG (DIN 40430) Protection class - : - IP68 Properties - : - Enable to use cable glands with bigger connection threads than the existing threaded holes

Adapter - : - Nickel Plated Brass O-ring - : - NBR Connection thread - : - Metric (EN60423)/PG (DIN 40430) Protection class - : - IP68 Properties - : - Adapter from metric outer thread to PG inner thread : - Enable use of PG accessories ...

Type - : - AP TYPE ADAPTER Protection code - : - I M2 Ex db I Mb / I M2 Ex eb I Mb II 2G Ex db IIC Gb II 2G Ex eb II Gb II 1D Ex ta IIIC Da Certificate - : - IEP 15 ATEX 0333U Material - : - Brass, brass with nickel plated, stainless ...

Diameter: 20 mm - 63 mm
Length: 58 mm - 97 mm

Series of fittings designed for conveying fluids under pressure with a hot thread and weld connection system (butt welding). PP-H FITTINGS MAIN PROPERTIES and CHARACTERISTICS: – High chemical resistance: the use of PP-H resins guarantees ...

Temperature: -60 °C - 180 °C

Insulating & anticondensation hose. Insulating cover for silicone hoses. It’s An innovative unique material with excellent insulation characteristics that eliminates condensation problems in cold surfaces. This material possessses low ...

quick-change adapter type: EM Quick-change holder for use in quick-change holders (e.g., KSN, SFM, GR-S). Product features and benefits: Can be used up to 50 bar with internal coolant supply (ICS).

quick-change adapter type: EM-U Quick-change holder with overload clutch for use in quick-change holders such as KSN, SFM, GR-S. Product features and benefits: With overload clutch to prevent tool breakage. Can be used up to ...

quick-change adapter type: EM-L Quick-change holder with length adjustment for use in quick-change holders (e.g., KSN, SFM, GR-S). Product features and benefits: The length adjustment enables more projecting length of the holder. Can ...

Diameter: 19 mm - 65 mm

Nylon Adapters from metric external thread up to PG internal thread and from PG external thread up to metric internal thread. This component alters the threaded entry diameter on any threaded connector with incompatible thread forms. Std. ...

Diameter: 20 mm - 65 mm

These components enlarge the threaded entry diameter on any threaded interface from a smaller to larger thread size in order to accept a suitable gland. Configuration: From small external Metric to large internal Metric and from small ...

Diameter: 14 mm - 65 mm
Length: 16 mm - 33 mm

This component alters the threaded entry diameter on any threaded connector with incompatible thread forms. Used to adapt from EN 60423 metric external thread up to DIN 40430 PG internal thread and from DIN 40430 PG external thread ...