|
|
|
The F-4150 series Quick Disconnect simplifies tubing connections during assembly. The 10-32 UNF male-threaded Quick Disconnect is available in three barb configurations: straight, elbow, and tee. Depress the latching pushbutton to remove the barb; re-insertion of the barb locks it into position. Barbs can be provided for 1/16”, 1/8”, or .170 I.D. tubing. The unique design allows the fitting to swivel 360 º.
|
|
Internal end of the Beswick miniature screw-type quick disconnect. The screw-type quick disconnect allows for fast set-up and break-down of fluid lines and facilitates easy component replacement. When the internal end (QDC-1F, QDC-2F or QDC-5F) and the external end (QDC-1M, QDC-2M or QDC-3M) are screwed together, a valve in the external end opens to permit flow. When the external end and internal end are disconnected, the valve in the external end closes to prevent fluid from exiting. The QDC-4F and QDC-5M can be used when no shut-off valve is needed. The screw-type quick disconnects are economical and a good choice when connects/disconnects are infrequent. Beswick snap-type quick disconnects may be a better choice for more frequent connects/disconnects or greater convenience is desired.
Material: Brass body & nut with one steel E-ring.
|
|
The performance seen from all angles with Stäubli 360° socket: Freedom, Performance and Safety.
Designed for maximum efficiency the revolution Stäubli is unique:
- User friendly
- Light
- Reliable
- Anti-hose whip safety device
Thanks to the 360° and 90° double swivel action, the new revolution Stäubli couplings follow your every movement.
Performance is greatly enhanced by incorporating the swivel directly in the socket thus creating:
- Excellent air-flow,
- Perfect leak-tightness,
- Very compact assembly.
|
|
|
|
|
|
MID has developed a new variable geometry coupling, which can swivel through 360 degrees: the DynaVariacor®. This internationally patented system provides in particular complete flexibility for use with all types of pneumatic tools and appliances.
The coupling is robust, light and compact; it reduces wear and avoids coiling of the feed hose. This coupling enables increased precision of movement of the tool by reducing the handling force required by the user, due to the relative rigidity of the feed pipes. Operator comfort is improved. The DynaVariacor® products have useful features: the interior cross-section of the coupling remains constant at all angles, so pressure loss is minimised and flow rates are naturally optimum.
The system is available in several sizes and fittings for a variety of uses: small industrial hand tools such as impact wrenches, grinders, drills, screw guns and riveting machines as well as equipment of larger size and power such as nail guns, staplers, disc sanders, pneumatic drills, compacting machines and special equipment.
|
|
NS4 Non-Spill Quick Disconnect Couplings
Colder Products’ patented NS4 Series couplings feature non-spill valves in a compact size, at a great price. Use the NS4 when even a few spilled or leaked drops of fluid pose problems regarding safety, environmental regulations or media cost. These innovative couplings are lightweight, chemically resistant and easy to use. The non-spill design virtually eliminates spills, minimizes downtime and enhances operator safety.
|
|
|
|
|
|
NS2 Couplings Deliver Cost-Efficient, High-Flow Fluid Line Transfer in a Small Footprint, Safely and Economically
Colder Products’ NS2 Series compact, non-spill quick disconnect couplings provides users with fast, safe and virtually leak-free fluid line connections. An excellent choice for printing and ink management, analytical instrumentation, electronic cooling, and many other applications, the patent-pending NS2 couplings provide high-flow fluid transfer in a small footprint.
For applications that require the safe transfer of fluids, the NS2 offers an easy, twist-to-connect locking mechanism and double-sided non-spill shutoff valves for added safety and convenience.
The NS2 meets the need for smaller, more cost-effective industrial couplings. The smaller couplings can replace larger ones, offering users a low-cost, space-saving option for a wide variety of coupling applications. The NS2 couplings also offer very low air inclusion – air induced into the coupling upon connection – minimizing contaminants and reducing the need to purge fluid lines.
Colder NS2 Series quick disconnect couplings are available in a variety of sizes and configurations.
|
|
NSH Series Couplings
Colder Products’ patented NSH Series couplings feature a pressure-balanced, non-spill design and a 100% metal-free, spring-free flow path at a very competitive price. These innovative couplings are easy to use (single-handed operation) and provide high flow capacity. Their non-spill design virtually eliminates spills, minimizes downtime and enhances operator safety.
|
|
|
Global Manufacturer of Quick Release - Quick Disconnect - Quick Connect Hose Couplings in General Purpose Poppet and Dry Break - Non Spill (Flat/Flush Face) styles for virtually any Hydraulic or Pneumatic fluid application. Many styles available from ISO Interchange designs to subsea, panel mount, screw to connect, connect under pressure, and many specialty designs are available from Snap-tite.
|
|
Non spill design
Flush faced and non-spill, HCB ensures no air inclusion into the system when connecting as well as spillage when disconnecting.
Easy to use
Compact and user friendly, the HCB connector is easy to operate. In connected position, plug and socket dust caps can be mated together. Stainless steel dust caps available on request.
Applications
All fluids
* gas
* steam
* vacuum
* aggressive fluids
for all industrial sectors.
|
|
|
|
|
|
Our experts for special cases: Highest safety ex works!
Ball-Face Clean Break coupling for difficult fluid or gaseous media
BF series
Features:
Clean break coupling made of stainless steel, especially suited for difficult fluid or gaseous media. Adhering to highest safety standards and optimally operable through automatic locking, they are primarily designed for applications in the chemical industry.
This series is suited for non-lubricating media (as e.g. demineralised water, “dry gases”) as well as lubricating media. Tried, tested and proven for solvents, chemical fluids and water vapour. Also used for lyes, a wide variety of acids and many other media.
Key Benefits:
• clean break (low-loss operation with few inclusions)
• easy to clean smooth ball-face outer surface
• squirt-free
• minimal couple force
• safety through positively controlled locking and valve opening process (nominal
sizes 25 and 50 mm)
• automatic locking
• well proven
• nominal sizes 25 and 50 mm connectable under operating pressure by separate locking and valve opening process
Nominal Sizes:
5, 9, 12, 25 and 50 mm
Media:
• water, water vapour, solvents, acids, soap solutions, lyes, oils, all non-lubricating media and many more
• for difficult and gaseous media, primarily for the chemical industry
Pressure range:
up to 64 bar, depending on the nominal size
|
|
|
SafeWay’s FFE49 Series is a non-spill, push-to-connect, fluid transfer quick coupling designed for use with most industrial fluids. This series is interchangeable with quick couplings meeting International Standard ISO 16028 dimensional requirements, and our field proven, heavy-duty FF49 Series. Some basic applications include skid-steer loaders, power utility equipment, construction equipment, agricultural equipment, and hydraulic hand tools. Use this quick coupling series whenever spillage can result in a safety or environmental hazard, when air inclusion during connection to a hydraulic system cannot be tolerated, and when international interchangeability with other brands is required.
|
|
Ball Swivel Fittings:
Ball Swivel Fittings are used between the tool and air supply hose to eliminate kinking and twisting. Ball Swivels provide a more natural range of motion than the "traditional" air tool swivel fitting. In addition to providing a greater bend angle (20 degrees to 25 degrees depending on size) and flow capacity than ball swivels made by other manufacturers., these fittings will increase tool maneuverability and production capacity, minimize user fatigue, extend the life of the hose and minimize cost. Made of hardened steel with nickel-plated barbs.
Coilhose Pneumatics offers the following lines of Fittings:
COILOCK Push-to-Connect Fittings
Metric COILOCK Push-to-Connect Fittings
Speed Controls
Poly-Tube Fittings
Brass Hose Fittings
Nylon Hose Fittings
Ball Swivel Fittings
Ball Swivel Connectors
Orbital Swivel Fittings
Brass Pipe Fittings
|
|
Camozzi offers a large selection of fittings and accessories suitable for a wide range of applications.
Universal fittings, super-rapid fittings, quick release couplings and accessories are available in different dimensions from M5 to G1/2. Our fittings range includes the patented and longstanding 'Sprint' system that guarantees tightening and facilitates the repeated removal and reassembly of the fitting.
|
|
|
Legris brass compression fittings are compact and easy to assemble, provide excellent sealing qualities, and are suitable for use with various types of tubing. Excellent pressure (up to 14 bar nominal, 36 bar max) and temperature (-75C° to +120°C) performance.
|
|
Product Specifications
Temperature Range Brass Sleeve -40 ° F to 325° F
Material of Shapes (Elbow, Tees) Brass CA 377
|
|
|
|
|
|
General Description
The John Guest Water Trap Tee Convertor is a simple and convenient way of converting a standard John Guest 28mm Tee, Part No. PM0228E, to a Water Trap Tee.
When fitted, it will stop condensed water within the Air Ring Main Circuit from entering the vertical take off spurs.
It is important that the Ring Main has been installed with the correct fall and water drain points are regularly vented.
To Assemble
Use either John Guest 28mm Nylon Pipe Part No. PA-RM2823-3M-10B or standard 28mm copper pipe. The pipe should be cut squarely and be free of burrs.
The shorter spigot should be pressed into the pipe. When using copper pipe the fit will be loose, this will not affect the function.
The Pipe and Convertor should now be firmly inserted into the centre port of the Tee. Full insertion is required to correctly locate the Convertor and provide a water tight seal.
By turning the screw cap by approximately 1/4 turn (2 clicks can be heard) the collet is locked in place and further compression of the 'o' ring on the pipe is achieved.
Materials of Construction
This fitting is made of the following components:-
* The body is produced in brass
* The 'O'Ring is nitrile rubber
|
|
Features
* Safety
* Recoil free 2-stage coupling
* 2-stage disconnection
* Technical
* Simple operation, no force required
* Suitable for outdoor applications
* Full flow, negligible loss of pressure
* Flowrate at pressure drop of 0.5 bar (7 psi): 900 l/min (32 CFM)
|
|
In numerous applications where operators work in confined or polluted atmospheres, breathing air must meeting safety standards and operators must have full freedom of movement and sufficient autonomy.
Treatment, distribution and supply of breathable air for personal protective equipment.
All items in the range comply with standards EN 139 and 1835
|
|
For more than 20 years, STAUBLI has been developing a comprehensive programme dedicated to the Breathing Air supply lines for all your personal protective equipment.
COMPLETE SOLUTIONS for:
* Transformation of the instrumentation air into "Breathing Quality" air,
* Supply in Breathing Air for the personal protective equipment, masks, half suits and ventilated suits,
* Quick connection of the Breathing Air lines,
* ...
Applications in ALL TYPES OF INDUSTRIES and more specifically:
* Nuclear.
* Industries: chemicals, pharmaceuticals...
* Shipyards.
* Asbestos-removal project.
Real lifelines, your Breathing Air lines must be perfectly RELIABLE:
* Automatic quick connections,
* COMPLIANCE WITH RELEVANT RULES AND REGULATIONS,
* Secured connection,
* Direct connection between the protective equipment and the supply in Breathing Air,
* Anti hose-whip safety,
* Long-lasting seal,
* Handiness,
* ...
STAUBLI quality, a warrant of your safety!
|
|
99 KL series
With the 99 KL series, both the coupling as well as the plug are filled with a dry-break valve system. During the connection process, the plug and the coupling seals before both valves open. The valves close simultaneously when disconnected, allowing the coupling and plug to be seperated afterward. This ensures minimum leakage. It cannot be connected with any other design in this series. All invidual parts are electro-burnished.
Advantages
Coded via two lateral grooves on the plug and a similar guide in the coupling, which are arranged in different angular degrees. The 8-way coding is standard.
Applications
Mechanical engineerring, plant machinery, chemistry
|
|
QUICK-RELEASE ERS
* Connecting of air tools, blowguns, air automation equipment.
- Paint and body shop.
- Automotive and aircraft assembly lines.
- Any type of industry in contact with finished products (i.e. furniture, appliances, computers, cars).
* Non scratch finished surfaces
Perfect single cylinder construction of high impact composite with no external metallic parts. Special non scratching clamping system including stress relief
* Light weight
The 6 mm coupling weight only 125 g and the 8 mm coupling only 140 g.
These characteristics, highly appreciated by the operators on the assembly lines, help to prevent carpal tunnel problems.
* Fully automatic
Thanks to the patented safety push-button, it can be connected and disconnected with one hand, for quick and effortless changing.
* Long lasting airtightness
Firm embedding of plug into socket and long guide path for the connecting plug on hardened and ground bearing surfaces provide long life and reliable airtightness.
|
|
This series of fittings is called "compression" because realizing the clamping of the tube and the tightness between the tube and the body-fitting, by means of the compression of the ring called "olive".
The seats of the fittings, the olives and nuts are dimensioned in conformity with the DIN standards.
Connection tubes:
Tubes made in copper, steel, iron, aluminium, brass, etc.
With an inside support bush can be used also for plastic material such as PA11, NYLON PA 6, etc.
Fluids:
Water, oils, compressed air, fluids in general for the hydraulic, pneumatic and oildynamic plants etc.
Fittings are available in the following sizes:
tube from 4 up to 22;
thread of 1/8 to 1".
|
|
Camozzi offers a large selection of fittings and accessories suitable for a wide range of applications. Universal fittings, super-rapid fittings, quick-release couplings and accessories are available in different dimensions from M5 to G1/2. Our fittings range includes the patented and longstanding “Sprint” system that guarantees tightening and facilitates the repeated removal and reassembly of the fitting.
|
|
INFINITY
Brass push-in fittings and aluminum tubes.
Easiness and quickness of assembling.
Special patented fittings for outlet.
Diameters available: 20, 25, 32, 40, 50, 63 mm
Compatible Fluids: Compressed air, Inert gases and Vacuum
Minimum temperature: -20°C
Maximim temperature 80°C
Minimum pressure: -0.99 bar
Maximum pressure: 15 bar
UV resistant. Fireproof. Anticorrosive coating.
"MOVE THE AIR POWER"
|
|
- Aluminium pipe
- Diameters 16.5 to 100 mm (1/2'' to 4'')
- Quick connection, easy to install
- Efficient flow, no leaks
- 10 years guarantee
|
|
PIPES AND FITTINGS FOR COMPRESSED AIR RINGMAINS
System PVR (PVC alloy) and Concept ALR (aluminium) offer an easy to use, modular system for installing air networks.
|
|
With full flow. No force required or loss of pressure in the system. Just a turn and the air vent ensures that the hose is ventilated – thus rendering it
harmless. OETIKER Swing Couplings SC are available in nominal sizes DN6 to DN11 and in different models. They are compatible with most popular plug systems. The many different types and models and a wide choice of seals
and lubricants mean that OETIKER Couplings are suitable for numerous applications throughout industry.
Durability, reliability, simple and safe handling are features of all OETIKER Swing Couplings. OETIKER Swing Couplings fulfill all the requirements of current quality standards and have also been awarded a type examination certificate from the Swiss Accident Insurance Institute SUVA.
|
|
Air Logic manufactures a comprehensive line of nylon and polypropylene plastic fittings; the polypropylene fittings ar more chemically resistant than our standard nylon fittings. Polypropylene also provides more dimensional stability.
The fittings include Barbed Crosses, Elbows, Tees, and Unions. Barbs are available for 1/16", 1/8", or .170" I.D. tubing. The nylon fittings can be provided in black or white; the polypropylene fittings are gray.
|
|
Brass Hose Fittings:
Coilhose manufactures brass fittings to exacting tolerances and strict quality control standards. Made of heavy duty, solid brass barb fittings with properly crimped ferrules or clamps can be used with Flexee, nitrile, rubber and thermoplastic hose. Coilhose reusuable Hose Fittings are ideal for quick, easy yet permanent in-field installations. Reusable fittings can be used with nitrile and rubber hose.
Coilhose Pneumatics offers the following lines of Fittings:
COILOCK Push-to-Connect Fittings
Metric COILOCK Push-to-Connect Fittings
Speed Controls
Poly-Tube Fittings
Brass Hose Fittings
Nylon Hose Fittings
Ball Swivel Fittings
Ball Swivel Connectors
Orbital Swivel Fittings
Brass Pipe Fittings
|
|
All-purpose low pressure series LP / SP
Features:
The LP / SP series comprises single and double shut-off couplings in nominal sizes from 2.5 to 50 mm. This series is available in different materials with various surface coatings.
Key Benefits:
• universally applicable
• extremely hard-wearing & durable
• various seal materials
• variety of optional equipment, e.g. unlocking device, venting valves
• nominal sizes 4, 6, 7, 12 and 19 mm in a squirt-free version
• broad spectrum of connection types in the standard version
• locking aid
• ring grips optionally available for large nominal sizes
Nominal Sizes:
2.5, 3, 4, 6, 7, 9, 12, 19, 32 and 50 mm
Media:
• water
• compressed air
• diverse fluids
• fuel
• lubricating greases / oils
• technical gases
Pressure Range:
up to 100 bar (some types up to 200 bar) depending on nominal size and material, partially suitable for vacuum
|
|
|
|
Pneumatic couplings
