- Detection - Measurement >
- Position, Speed and Acceleration Measurements >
- Other position, speed and acceleration measurement equipment
Other position, speed and acceleration measurement equipment
Ellipse-D is a compact Inertial Navigation System with integrated dual-antenna RTK GNSS receiver for accurate Heading and Navigation. It provides Roll, Pitch, Heading, Heave, and Navigation data. Ellipse-D includes a MEMS-based Inertial ...
SBG Systems
Ellipse-A is a small-sized high performance Attitude and Heading Reference System (AHRS). It provides Roll, Pitch, Heading, and Heave data. This light-weight sensor (45 grams) includes a MEMS-based Inertial Measurement Unit (IMU) integrating ...
SBG Systems
Ellipse-E is a small-sized high performance Inertial Navigation System. It provides Roll, Pitch, Heading, and Heave, and computes Navigation data when connected to an external GNSS receiver. It accepts Odometer aiding to maintain the ...
SBG Systems
Risolution: 1 - 5 - 10 micron Axes: X - Y - Z - W GENIUS digital read-out, for milling and boring machines, has a large LCD display to visualize the part. It also displays a guide to the programming of complex work cycles, such as ...
Elbo - Eredi Bassi Araldo sas
DRO dedicated to milling or boring machine, with a simple and clean structure, it has a number of useful features to simplify the operator's job. It also provides a practical integrated calculator that interacts with the displayed coordinates. Robust ...
Elbo - Eredi Bassi Araldo sas
DRO dedicated to milling or boring machine, with a simple and clean structure, it has a number of useful features to simplify the operator's job. It also provides a practical integrated calculator that interacts with the displayed coordinates. Robust ...
Elbo - Eredi Bassi Araldo sas
- Solid shaft (flange or foot mounting), hollow shaft (A4 or hollow shaft type tacho generator) - Analog output signal with high-precision linearity 10-500 V / 1000 rpm - Application suitable voltage version - Options: Second shaft ...
Magnetically actuated proximity switches for providing volt-free changeover contacts allowing the switches to be wired either normally open or normally closed. The switch indicates at a local and/or remote alarm that the shower is ...
A tilt switch is a switching output inclinometer that toggles the output status when the tilt value exceeds the pre-set threshold. TLK100 is the new family of tilt sensors, based on MEMS technology, capable of working in extreme conditions ...
F.lli Rotondi has an internal R&D lab specialized in designing and manufacturing high-precision scales, reticles and photomasks – essential tools for the correct calibration of measuring machines. This is our core business, and we can ...
Optical scales are a type of linear encoder. Explained in the simplest terms, an optical scale is a graduated strip, on which measurement marks are set with an extreme level of precision at definite intervals. While operating, an optical ...
Housing diameter: 152 mm
The 8X60 series is a range of robust metrology-grade encoders that are compatible for industrial applications. They integrate four reading heads to abolish usual sources of encoder faults. They are made up of stainless steel making it ...
Housing diameter: 203 mm
Model 9480H angle encoders are durable encoders of metrology-grade. These are equally useful for different industrial applications. It integrates four reading heads to reduce the common errors of the encoders. The unit features stainless ...
XCL/XML Explosion proof / Switch Boxes Explosion proof approved ATEX II 2 G EEx d IIB T5 2 x cable entry, dome indicator or flat cover. Easy to mount on actuators with VDI/VDE 3845. Large selection of switches: Mechanical, Gold ...
PMV
PS/PM Switch Boxes / Weather proof The PS/PM series switchbox provides accurate and reliable position signaling in harsh, corrosive environments. • Designed for easy installation on both rotary and linear actuators. • The ...
PMV
WS/WM Switch Boxes / Weather proof WS/WM series switchbox is a simple switchbox with many features. The WS/WM Series UltraSwitch™ provides cost efficient, accurate and reliable position signaling. The compact enclosure is offered in ...
PMV
The new LM A series laser distance meters are new design to measure the distance precisely. It can measure AREA, VOLUME, ADDITION, SUBTRACTION, etc easily. It can also store 99 groups data. These meters can be used in interior/exterior ...
UNI-TREND TECHNOLOGY (CHINA) CO., LTD.
Golf rangefinder has flagpole lock, golf trajectory compensation, continuous measurement, distance/angle/height/speed measurement and vibration hint functions. It can be used in golf, power equipment installation, highway, municipal engineering, ...
UNI-TREND TECHNOLOGY (CHINA) CO., LTD.
-Counter with lower and upper limit values -Programmable initial position (Reset) -Counting speed up to 5 KHz -Bidirectional counting and encoder -Counting with scale factor -Configurable inputs NPN and PNP -Supply voltage ... ...
PCH 1420 with buffered outputs We have updated our PCH 1420 4-channel SIL-2 vibration monitor offering. From Spring 2021 we offer isolated and buffered outputs to each vibration input channel as well as for the speed sensor. PCH ...
Are you looking for an electronic vibration switch, without any 4-20 mA output but just a relay, the PCH 1220 is a low cost solution for a basic protection application? PCH 1220 constantly monitors the machine vibration within a 10-1000 ...
2 AXES INCLINATION SWITCH (± 60°) with 2 on/off static outputs Insensitive to shock and vibrations • Self teaching of zero position and threshold • Low power • High thermal stability • General features: These sensors give two NPN ...
2 AXES INCLINATION SWITCH (± 60°) with 2 on/off static outputs High thermal stability • Rugged anodized aluminum housing • Low power • Insensitive to shock and vibrations • General features: These sensors give two NPN normally open ...
The explosion-safe Artidor motion sensor is based on the latest high frequent radar technology and therefore capable of detecting even the slightest movements. Thanks to the wide opening angle and its 8 m detection range, any movement ...
Artidor Explosion Safety B.V.
The explosion-safe Artidor AR-024 occupancy detector is based on passive infrared technology and capable of detecting movements of heat sources. Thanks to the wide opening angle and its 10 m range, this detector is suitable for monitoring ...
Artidor Explosion Safety B.V.
A110H is a photoelectric hollow shaft angle encoder that produces up to 1.800.000 output pulses per revolution and has the accuracy of ±5 arc. sec.
Precizika Metrology
Two and Three Axis Readout Device (CS3000-2, CS3000-3) Features: Measuring in millimeters or inches (inch/mm) Radius calculation (1/2) Measuring in relative or absolute coordinate system (INC/ABS) Entering or setting zero values ...
Precizika Metrology
CS 5500 Advanced Two and Three Axis Readout Device (CS5500-2, CS5500-3) Features Measuring in millimeters or inches (inch/mm) Measuring system calibration in relation to reference point (REF) Radius calculation (1/2) Measuring ...
Precizika Metrology
Speed monitor Switching distance 0,5mm (+/- 0,2mm) Compatible to FP 210 from Infineon) Operating voltage 4,1 - 6,2V DC Output signal analog Usable switching frequency 50.000Hz Operating temperature -40°C - +85°C Protection ...
Pulsotronic
Due to their compact design Ultra Mini sensors from Pulsotronic are appropriate for applications offering little installation-space. They are used for example in medical engineering devices or other filigree applications. Operating ...
Pulsotronic
Housing diameter: 37 mm
Shaft diameter: 6 mm
Rotational speed: 6,000 rpm - 12,000 rpm
MINIATURE SOLID SHAFT ABSOLUTE MULTITURN ENCODER BISS INTERFACE Singleturn resolution up to 13 bits Magnetic technology Protection class IP64 according to DIN EN 60529 Connection by cable (other cable length available)
Hohner Automaticos
Housing diameter: 58 mm
Shaft diameter: 8 mm - 15 mm
Rotational speed: 6,000 rpm - 12,000 rpm
BLIND HOLLOW SHAFT ABSOLUTE MULTITURN ENCODER Singleturn resolution up to 13 bits Magnetic technology Protection class IP65 according to DIN EN 60529 Connection by cable (other cable length available) or industrial ...
Hohner Automaticos
This product provides a dual beams photoelectric slot sensor for edge detection.
Micro Detectors
This product is equipped with sensors and has the capability to protect against any type of electric damages.
Micro Detectors
For detection of transparent to opaque labels with slit widths up to 3 mm and depth 69 mm, M.D. Micro Detectors has come up with the ultrasonic FC8 series. Its compact aluminum body comes with a M8 4-pole connector and Lo/Do configurable ...
Micro Detectors
In combination with the corresponding safety modules, the sensors of the ST series are suitable for the monitoring of protective devices on machines without inertia and allow the system in which they are used to reach a safety category ...
Pizzato Elettrica
Safety sensors with RFID technology ST G series Housing: Polymer housing, ST G series Inputs and outputs : 2 safety outputs OSSD PNP, 1 auxiliary output Power: 24 Vdc Type of cable or connector: Integrated M12 ...
Pizzato Elettrica
New possibilities for ST series safety sensors Pizzato Elettrica further expands its range of ST series RFID safety sensors with the introduction of the new ST H version. The ST H series RFID sensors are equipped with all the technical ...
Pizzato Elettrica
2-axis DRO for lathes - Preset function - Absolute, Incremental and Io reference (home) signals - Resolutions from 0.1 microns onInnova 20i T - Feedrate and movement alarms - Axis coupling - Hysteresis factor - ...
FAGOR
3-axis DRO for lathes: Innova 30i T Preset function. Absolute, Incremental and Io reference (home) signals. Resolutions from 0.1 microns on. Feedrate and movement alarms Innova 30i T Axis coupling. Hysteresis factor. Linear axis ...
FAGOR
DRO from EDM and Grinders for 2 and 3 axes lathes Preset function Absolute, Incremental and Io reference (home) signals Resolutions from 0.1 microns on Feedrate and movement alarms Axis coupling Hysteresis factor Linear axis ...
FAGOR
Process temperature: -40 °C - 85 °C
ASX is a contact-less magnetic absolute encoder series featuring high operation speed employed in harsh environments such as, automation and process control fields. Can Open redundant output is available. ASX provide a unique digital ...
UCI100 is a Tilt Switch designed for applications like on window cleaning platforms, aerial platforms, lifting platforms and firefighter ladders. Due to high protection class IP67, the sensor is perfectly suited for use under damp or ...
ASC’s precision navigation and pointing gyroscopes are made of robust silicon MEMS vibrating ring elements. As the gyro is rotated, coriolis forces acting on the silicon ring cause radial movement at the ring perimeter, the magnitude ...
ASC
ASC’s precision navigation and pointing gyroscopes are made of robust silicon MEMS vibrating ring elements. As the gyro is rotated, coriolis forces acting on the silicon ring cause radial movement at the ring perimeter, the magnitude ...
ASC
ASC IMU 8 – Tactical Grade Performance Measurement Range Acceleration: 2g, 5g, 10g, 30g Measurement Range Rotation: 100 °/s, 200 °/s Angular Random Walk: 0.017 °/√hz Bias Stability: ...
ASC
Easy and lowest-installed-cost vibration measurement of rotating machinery Velocity Transmitters VT-110/120: This reliable and cost-effective monitoring solution is used for DCS / PLC based overall vibration measurement and trending ...
Ultrasonic Sensor, Diffuse Reflective, M12 Stainless Steel housing, Plug M12 Connector, Sn 25-200mm, NPN Output, Supply Voltage 10-30VDC, Current Output 100mA, Operating Temperature -20-70C, Response Time <10mS, Switching Frequency 20Hz, ...
Carlo Gavazzi Automation SpA
Ultrasonic Sensor, Diffuse Reflective, M18 PBT housing, M12 Connector, Sn 50-400mm, Analogue Output 4-20mA+ NPN, Supply Voltage 15-30VDC, Operating Temperature -20-60C, Response time<50ms, Switching Frequency 10Hz, Teach-in Rated operating ...
Carlo Gavazzi Automation SpA
Ultrasonic Sensor, Diffuse Reflective, M18 PBT housing, Cable Connector, Sn 40-500mm, NPN Output x2, Supply Voltage 15-30VDC, Current Output 500mA, Operating Temperature -20-60C, Response Time< 50mS, Switching Frequency 10Hz, Teach-in Rated ...
Carlo Gavazzi Automation SpA
Brodersen's UDC-32 is a digital panel controller with 4 digit LED display. The panel meter is used for monitoring and measurement oF • AC/DC voltage • AC/DC current • Temperature with PT-100/500/1000, Ni-100, Thermistors and ...
Measuring range: 19 mm
Process temperature: -15 °C - 50 °C
The EM21 is designed to provide car position signals in the control of electric and hydraulic lifts and elevators. It is a rugged and heavy duty switch, small enough to fit within the overall depth of standard T guides. The EM21 is rated ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining