|
|
Speciality
Flow Rate Q:0-65m3/h
Delivery Lift H:0-240m
Rotary Speed N:475-960r/min
Calibre:φ32-φ150
Temp.Range T:-15--+200 ℃
Service Pressure P:Max.2.5Mpa
Material:overall stainless steel,shaft stainless steel.
Type
FG35-1
F:F means stainless steel pump in case of no letters,it means the flow-through parts are made of cast iron and the inner parts made of 2cr13 stainless or abasion-proof steel
G:Series of single-screw pump
35:Nominal diameter of screw(mm)
1:Meaning class 1 pump 2meaning class 2 pump
|
|
Wide Application
Single screw pump is used in all fields widely to feed kinds of medium, running at a constant pressure continuously, without pulse and damage when feeding medium, and change the gauging aim through adjusting rotation speed.
Feeding Medium
This product is applicable for feeding medium which has the following properties:
High solid content (diameter of the biggest particle is 50mm) or no solid content
Medium with all viscosities (1mPas~3,000,000mPas)
Medium that is easy to be generated and swelled
Shearing sensitive medium
Medium with erosion
Medium with/without self lubrication
Erosive medium (PH=0~14)
Adhesive medium
Toxicity hazard medium
|
|
|
|
|
|
Screw pumps NFA-T series
Ideal for transferring highly viscous and highly concentrated slurry liquids
This monoaxial screw pump is ideal for transferring viscous and slurry liquids. It can handle a highly viscous liquid of up to 1,000,000 mPa.S, as well as a material that is almost non-fluidal. The liquid can be transferred smoothly without pulsation, stirring, or foaming.
Superior metering and self-priming performance
Since this is a monoaxial screw pump, the pump can discharge liquid in direct proportion to its speed, and therefore excels in transferring liquid precisely. Furthermore, the flow rate can be controlled easily by adjusting the pump speed. The self-priming capability is maximum 9 m, making the pump ideal for sucking from underground or from a distance.
Stable quality and economy
All parts of the pump are designed, developed, and manufactured using Iwaki technology. This results in stable part quality and superior economy.
Easy maintenance
Thanks to a simple structure, the pump is easy to maintain and inspect.
|
|
|
|
|
|
High pressure pump KTS
Areas of application
The KTS conveys cooling lubricant (oil, emulsion, diluted solutions) for high-pressure applications on machine tools. A typical example is cooling, lubrication and chip transportation for tools with an internal cooling lubricant feed for drilling and milling.
Properties
Type KTS screw pumps by KNOLL are self-priming positive displacement pumps suitable for lubricating and non-abrasive materials. The pump essentially consists of 3 components: 1. Suction housing, 2. screw housing with a drive spindle and two integral screw spindles, 3. pressure housing with throttle point, sealed shaft duct and external main bearing. The screw housing consists of 2 ceramic shells imbedded in steel and the spindle package is made of a specially treated tool steel.
Equipment
A submerged version (type -T) for vertical installation (usually in containers) and a foot mounted version (type -F) for horizontal dry installation are available for all pumps.
Properties
1. High resistance to wear and long service life as a result.
2. Low pulsation.
3. Extremely temperature-resistant.
4. Minimal noise generation.
5. Gentle fluid delivery.
|
|
The ACD pumps are used for a number of different fluids:
Lubrication oil, fuel oil, vegetable oil, hydraulic oil and other hydraulic fluids,
glycols, polymers, emulsions, and any nonaggressive fluid with some lubricating
properties.
Typical application are:
• Lubrication of diesel engines, gears, gas and steam turbines, hydro turbines, paper machines.
• Circulation for cooling and filtration in large machineries and hydraulic systems,
pumping transformer oil for insulation in transformers.
• Transfer onboard ships, in oil factories, refineries, tank farms etc.
|
|
No more problems with mechanical seals:
Compared to mechanical seals the magnetic coupling is hermetically tight.
Magnetic couplings can be used up to 250°C. A mechanical seal can only be used up to 150°C.
More benefits:
Beware engine failures.
Reduced lifecycle-costs – long life cycle.
The hermetically sealed magnetic coupling prevents pump failures, caused by fuel residues.
No required lubrication as at mechanical seals. Dry running is not possible.
Leakage free and clean. Benefits for all, which commit to Greenship Technology.
Guarantee on-board safety. (SOLAS – “Safe of Life at Sea”)
Overload protection.
Maintenance-free.
Please consider that we are a manufacturer of high quality displacement pumps and flowmeters for liquids. The products (pumps with magnetic couplings, high pressure flowmeters and flowmeters – chemically resistant) mentioned on this portal are only part of our product range. Please find more detailed information on our website or directly from us.
|
|
The ACE pumps are used for a number of different fluids:
Lubrication oil, fuel oil, vegetable oil, hydraulic oil and other hydraulic fluids, glycol, polymers, emulsions, and any non-aggressive fluid with sufficient lubricating properties.
When so required the ACE pump may be certified according to any of following classification societies: DNV, BV, LRS, ABS, RS, GL, RINA, KR, NK or CCS.
Typical applications are:
• Lubrication of diesel engines, gears, gas and steam turbines, hydro turbines and paper machines.
• Circulation for cooling and filtration in large machineries, hydraulic systems and transformer oil for insulation in transformers.
• Transfer onboard ships, in oil factories, refineries, tank farms etc.
• Fuel supply duties for diesel engines.
|
|
No more problems with air contact:
Hermetically sealed KRAL pumps with magnetic coupling offers maintenance-free operation, high operational safety, long life cycle and broad reduced costs.
Please consider that we are a manufacturer of high quality displacement pumps and flowmeters for liquids. The products (pumps with magnetic couplings, high pressure flowmeters and flowmeters – chemically resistant) mentioned on this portal are only part of our product range. Please find more detailed information on our website or directly from us.
|
|
|
The Triro pump is of the positive displacement axial flow screw type with only three moving parts - a power rotor and two idler rotors. These three rotors (hence the brand name TRIRO) have accurately machined intermeshing threads which enfold the liquid being pumped and act as seals in relation to each other and to the pump body or sleeve in which they rotate.
|
|
Pumped Liquid
Hydraulic oils, synthetic hydraulic liquids, native oils, lubricating oils
Main Fields Of Application
For generation of pressure in oil-hydraulic systems, lubricating oil supplying, general industrial technologies
|
|
The Twinro 2 screw pump is a heavy duty, fixed flow transfer unit. It is available in either Iron, Steel or Stainless Steel constructions to suit a variety of duties. The design of the screwset means the screws intermesh without metalic contact, making the pump suitable for non-lubricating duties. The pump is available in two configurations :
Outboard bearing pumps suitable for non-lubricating liquids, such as Petroleum Liquids, Palm Oils, Fatty Acids and Water Emulsions.
Inboard bearing pumps suitable for lubricating liquids, such as Lube Oils, and clean Fuel Oils.
|
|
Pumped Liquid
Contaminated water, soaps and fats, paint and lacquer, food and beverage
Main Fields Of Application
Slurry pumps, metering pumps, transfer pumps in all industrial branches
|
|
| ... products without technical information |
| |
|
|
Screw pumps
