Grippers, manipulators

128 companies | 751 products
Filters
  • What’s new?
    Submit

Excellent stroke to closing time ratio
The SCHUNK EGP in size 25 is already the smallest electric gripper for small components on the market today. The SCHUNK EGP 25 once again sets a record in speed. With a rapid 0.03 s closing time it is the fastest in its weight class and has opened up unexpected potential in high-speed Pick & Place...

Compact gripper with grips and sensitivity
The new WSG 25 gripper for small components is the smallest intelligent gripper on the market that can be controlled via Ethernet TCP / IP. The WSG 25 was designed especially for use on small robots and in compact gantry systems. Both the finger position and the gripping force can be individually adapted in each stroke and continuously...

The EGM Magnetic Gripper is highly capable of handling ferromagnetic workpieces without tampering with the contours. The EGM has permanent magnets that are not pneumatically actuated but uses electromagnets unlike the...

Efficient high performance assembly
The all-purpose collection gripper SCHUNK RVK significantly increases the productivity of Pick & Place applications. Instead of picking up, moving, and positioning components one at a time - as is usual in high performance assembly - the Collect & Place principle of the SCHUNK RVK first collects several parts...

Integrated control unit in the wrist
The series production version of the anthropomorphic SCHUNK 5-finger hand grips nearly as perfectly as the human hand. The electronics are completely integrated into the wrist, which allows the 5-finger hand to simulate nearly all human...

{{productDetail[12463]}}

The Camozzi Angular Grippers Series CGA are top of the line units developed for industrial applications. The CGA has mounting holes on three sides which provide...

The CGSN Series offers angular grippers that are designed to operate at 1 bar/7 bar pressure, 100 cycles/min. maximum frequency and -10°C/60°C temperature in dual effect.

These...

Camozzi's CGP Series of parallel grippers come in various models, with corresponding magnetic sizes according to model. These models include the CGP-10 with a bore size of Ø 10 millimeters,...

CGB Guided parallel grippers operate on a 180 cycles per min maximum frequency ratio. They are available in different bore dimensions including Ø16, Ø...

Featuring dual effect operation, this machine has a working pressure of 1 ÷ 7 bar (1,5 ÷ 7 bar for Ø10) and -10°C ÷ 60°C. One of its notable features is that it does not require...

{{productDetail[5625]}}

These are Grippers with gripper fingers that makes a linear motion, independent...

{{productDetail[4735]}}

The Minidex series' Man manipulator of Colombo Filippetti spa, are the mechanism...

The H.. S of COLOMBO FILIPPETTI spa lineup is fitted with rotary manipulators that conjugate dual mechanisms and convert the input smooth rotary motion in the conventional motions of the rotary place and pick. That is linear alternate motion...

The COLOMBO FILIPPETTI spa product range contains a series of linear manipulators. These devices can conjugate double cam mechanisms, which can transform uniform input rotary...

{{productDetail[5613]}}

This Gerbo Cermex's Palletizer is a compactly constructed product that contains 4 axes and conveyor that is inclined in order for the products to be set from the datum guide to ensure...

{{productDetail[8751]}}

The PZX - 265. AZX - 265 and RZX - 265 are all linear actuators manufactured by...

The MPBM series two-jaw angular gripper with self-centering option is a very simple plug and play gripper. It doesn’t require any programming and it is not consuming any electricity when plugged in.
The gripper-retention will remain stable...

The MPBS series from GIMATIC is a 2-jaw angular self-centering electric sprue gripper. Its compact, light weight design is integrated with a durable...

The MPLM is a self-centering 2-jaw parallel electric gripper manufactured by Gimatic. Its key features include an easy operation gripper that...

This is a self-centering - electric gripper that is available with two jaws. It is a user friendly gripper that can be played by just plugging...

{{productDetail[7115]}}

The Basic Version of GSP-P series is a 2-finger magnetic piston parallel gripper that is very easy to use...

This centrical gripper is a standard version model from Rexroth Pneumatics is part of the GSP-Z Series. It is a...

The basic version of GSP-A Grippers Series is a 40-degree angular gripper with a 2-finger design. It is equipped...

Featuring an aluminum housing, an Acrylonitrile Butadiene Rubber seal, and hardened steel operational components, the Standard Version of radial grippers have been...

The Non-contact transport System of the NCT-AL Series supports Bernoulli principle...

{{productDetail[654]}}

PLS04 a 7.4 kg with 0.22N air consumption and a an allowable pressure up to 1.3MPa hydraulic and 0.7MPa...

High precision and high gripping force allow for stable cutting.

Plunger Stroke (mm): 10
Jaw Stroke Diameter...

The PLS08 is a 210 mm work gripper chuck manufactured by Kitagawa Europe. Specifically made with...

KITAGAWA PUES06 series work gripper chucks are used for clamping and pull back of the workpiece inner diameter. They are a common choice for finish machining,...

The JM200 manufactured by Kitagawa is the new clamping system of the JIG module. It is designed for safe gripping...

{{productDetail[88623]}}
{{productDetail[32592]}}

The Rotary Action Handler practically delivers easy horizontal-to-vertical product...

{{productDetail[54987]}}

The LE* series is composed of various electric actuators and grippers that provides easy setup and operation. There are three linear actuators which are the rod (LEY), slider (LEF), and slide table...

SMC's Electric Actuators LE Series has four different models which include the LEY (rod type); LES (slide table type); LEF (slider type); and a perfectly rated electric...

The MHC are SMC'S series of angular grippers that comes in 4 variants to...

The SMC MHY, a compactly manufactured, 180-degree angular gripper, consistenly offers a maximum installation versatility...

Designed to keep considerable working space, the MHF2 Series by SMC has been dimensioned...

{{productDetail[16465]}}

This Le series of actuators are available in different models with varying specifications and functions.

They are designed with simple architecture, allowing easy assemblage. They have...

The new range of Series LE* electric actuators are effective units that are able to fill the technological gap that exists between standard air-operated cylinders and complex conventional electric actuators....

In operating heavy pay load spot welding applications, high-speed "Expert Spot" robots are specifically designed to deliver unmatched performance and reliability....

This pneumatic angular air gripper is skilled to perform auto switch functions. It is designed with...

The MHCA Air Gripper is designed with a fulcrum opening. It features a short,...

{{productDetail[82491]}}

This is the Series P1 gripper that features two parallel jaws. It has a dual acting...

The P4 Series consists of grippers with two parallel long stroke jaws. All the grippers...

These grippers from P7 series are equipped with dual hinged jaw that can move up to...

The series P8 technopolymer hinged grippers are single-acting hinged grippers manufactured from technopolymer...

{{productDetail[594]}}

The SVH Servo-Electric 5-Finger Gripping Hand by Schunk is an incorporated control unit in the wrist. The anthropomorphic Schunk's 5-finger hand grips is just as functional as the human hand.

The electronics are incorporated...

The MPG-plus from Schunk is a 2-Finger small component gripper specifically used for assembling, testing of workpieces in laboratories and in the pharmaceutical industry as it holds and...

The Rotary Lift Unit DRL 20 introduced by SCHUNK features a higher operation speed that results to an escalated volume of productivity with an up to 75 cycles...

This PWG-plus gripper is a compact and robust powerhouse due to the oval piston drive,wear-resistant dog bone drive and one-piece, robust aluminum housing. It can either be equipped with or without mechanical gripping force...

The 2-Finger long stroke gripper PHL offers two guidance options, multi-tooth guidance or profile rail guidance, that considerably raises the reliability of the unit. The dynamic sliding multi-tooth guidance for the PHL makes...

{{productDetail[69812]}}

The PRG series are sturdy line of 180° 2-Finger-Radial Grippers that...

The DRG from Schunk is a sealed gripper that comes in 5 series that has a gripping torque ranging from 8.20 Nm up to 143 Nm as well as having an opening...

The 2-Finger Parallel Grippers by Schunk is known for its versatility. This can be...

SCHUNK presents SVH servo-electric gripping hand with 5 fingers. This is the series production model of the SCHUNK 5-finger hand. It provides grips almost similar to that of a human hand. The electronics are fully built into the wrist. Due to this, the 5-finger hand can...

SCHUNK MPG-plus 2-finger gripper for small parts is a high-precision version. It has been designed for use in assembly automation of electronic and small parts. This version enables accurate positioning of some of the most delicate components.

During changing of the gripper, this high-accuracy version...

{{productDetail[7038]}}

Excellent and reliable functionality of palletizing robots depends on the utilization of superior clippers. Mollers has exclusively developed a bag gripper for the palletizing...

{{productDetail[18653]}}

The Parallel Gripper GPE / Angular Gripper GWE, manufactured by Montech, has an EC Motor Controller (ECMR) used for position monitoring....

The GPP precision parallel gripper from MONTECH, is ideally used for rigid applications, and is considered...

The Precision Mini Gripper GPPM is a dual-acting gripper designed for accommodating and processing...

The Universal Parallel Gripper GPU/GPUI is mainly used as a solution for gripping system applications....

The GWU-20/GWUI-20 universal angular grippers from MONTECH are ideally used for external gripping with a double-acting pneumatic cylinder. It employs a custom-made...

{{productDetail[5419]}}

The Pneumatic grippers are parallel or angular-type air cylinders and it ranges in sizes,...

The Pneumatic Grippers, part of the 6300 series, are commonly used in intricate systems...

The Pneumatic Grippers, part of the 6300 series, are commonly used in intricate systems...

The pneumatic grippers included in the 6300 series are used in complex systems,...

The pneumatic grippers from 6300 series include models 6301, 6302, 6302, 6310, 6311 and 6312 that can...

{{productDetail[5306]}}

The E770 is Elliot's fiber gripper with repeatable force of gripping offering a fast loading and unloading process. It has interchangeable grips...

{{productDetail[36261]}}

The Angular Style Air Gripper Type MHC2 features a compact, lightweight design...

The Non-contact Gripper Series XT661 helps in transferring work pieces without contact. It is...

Model variations with excellent dust proof and drip proof dust cover are expanded.
Long...

The Z type LEHZ electric gripper features an excellent speed, force and position that can be adjusted....

{{productDetail[299]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation