 |
 |
V-ring seal V-Seals™ TIMKEN Europe
V-Seals are simple, versatile, elastomeric "face-type" seals produced in nitrile or Viton®. Timken's V-Seals can be the primary sealing element...
 |
 |
V-Seals are simple, versatile, elastomeric "face-type" seals produced in nitrile or Viton®. Timken's V-Seals can be the primary sealing element...
 |
 |
Sealing ring G series Schaeffler Technologies AG & Co. KG
Sealing rings are designed as contact seals. They protect the bearing position against contaminants, spray water and excessive...
 |
  |
Bearing protection seal NSK Europe
NSK's newly developed low-friction seal for transmission bearings reduce the seal friction by 50% in comparison to the old TM-seal design (10% friction reduction on the complete bearing). NSK fitted bearings with TM-seals are used inside...
 |
 |
Rotary shaft PTFE radial lip seal Dynalip® series Saint-Gobain Performance Plastics
Dynalip® Rotary Lip Seals Saint-Gobain High Performance Seals has a complete line of polymer-based Dynalip® seals with many...
 |
 |
- Broad range of applications, for example in industrial gearboxes - Reliable sealing of the housing bore, even with increased roughness...
 |
 |
U-ring lip seal ø 5 – 3300 mm, max. 25 MPa | Turcon® Roto Variseal® Trelleborg Sealing Solutions
A single-acting sealing element comprised of a U-shaped Turcon® ring and metallic...
 |
 |
Bearing protection seal 30 - 200°C (-20 - 400 °F), 0.2 - 1 barg | 83 series John Crane
The Type 83 is a contacting carbon bushing designed to isolate the bearing oil from the dry gas seal cartridge. Normally supplied as a complete seal cartridge, unique inner and outer segments are specifically designed to prevent oil migration and...
 |
 |
Expanded graphite packing and sealing ring LATTYgraf series LATTY INTERNATIONAL
Compressed sealing rings made of 99.85% pure expanded graphite...
 |
 |
Bearing protection seal THOMSON® Thomson
Thomson offers a complete line of accessories for our extensive collection of linear bearing products...
 |
 |
Shaft seal August Mink, Mink Bürsten
Mink AD-System (AD) – the innovative solution for sealing shafts The Mink AD-System consists of a specially designed brush ring to seal shafts and to prevent coolants, swarf and mists from escaping....
 |
 |
Self sealing washer max. 257 °F Heyco
For use with Heyco-Flex fittings. Liquid tight, dust tight, and oil tight at enclosure. Suitable...
 |
 |
Seal for rotating shaft Hunger
Hunger RDI rotary seal can be used as a sealing element for rotating machine parts. They are mainly used in rotary feed units for separation of oil or other fluids at different pressures and can be subjected to pressure on both sides. Since the seal requires...
 |
 |
Shaft seal 3 bar, -120 - 500 °C | Espey WD200/500 series BURGMANN INDUSTRIES
Features Multi-part seal rings, radially cut on process side, overlapped mortised with gas tight joints on atmosphere side Split housing design Lowest possible operation gap - lowest leakage Radially cut and overlapped mortised seal rings Dry-running Self-adjusting seal rings Compensation of radial and axial shaft...
 |
 |
Product characteristics D150 to D330 with patented locking Use between bellhousing and pump For the...
 |
 |
Shaft seal ElringKlinger Kunststofftechnik
Rotary seals with PTFE sealing lips are ideally suited for sealing rotating shafts. With outstanding chemical resistance...
 |
 |
Self sealing washer MICRO PLASTICS
These nylon washers are designed to prevent the loss of screws and bolts and to protect surfaces. The washer allows preliminary...
 |
 |
Shaft seal 2-/3-stage seal cartridge Andritz AG - Pumps Division
ANDRITZ is the technology leader for hydro-dynamic shaft seals...
 |
 |
Sealing ring SANDVIK HARD MATERIALS
Rings & Bushing Manufacturing a customized seal ring in link with specifications, and machining it to the required degree of flatness are not major engineering challenges. The problem is that the ring must remain flat to function regardless of application and environment. Wear resistance, toughness, corrosion resistance, and...
 |
 |
Spring energized PTFE seal -300...+550 °F, 5000 psi Seal Science
The requirement for low coefficients of friction, less than .08, temperatures ranging from -300F to 550F, pressures in excess of 5000 psi, the need to seal a corrosive acid .....These are the typical kinds...
 |
 |
Seal for rotating shaft Bal Seal Engineering
Bal Seal offers several families of rotary seals suitable...
 |
 |
Spring energized PTFE seal Advancap™ GREENE TWEED
The Advancap'" rod and piston seals are designed to provide a cost-effective cap seal solution that prevents extrusion and eliminates O-ring spiral failure in dynamic applications. Each seal combines a cap made from Avalon®,...
 |
 |
Shaft seal DI series HIRSCHMANN
Axial shaft seal with internal sealing lip, for use with liquids under high pressure....
 |
 |
Graphite seal and ring PerkinElmer Optoelectronics
This is the ferrule of choice for high-temperature applications. Of the three ferrule...
 |
 |
Graphite seal and ring IDT Industrie- und Dichtungstechnik Werk Kupferring GmbH
Pure graphite foil rings resistant against most media, will not be coated by metal and salt melting asbestors-free,...
