Rotary seals and shaft seals

77 companies | 437 industrial products

Companies per page

1 products CONTITECH
CONTITECH
shaft seal CONTITECH

Our drive shaft sealing components provide covering for propeller shaft joints. They provide...

SKF Magnetic Bearings
seal for rotating shaft SKF Magnetic Bearings

Radial shaft seals are used between rotating and non-rotating machine components (fig 1). They are made up of – a cylindrical outer covering of sheet steel (shell) or elastomer which seals statically...

SKF Magnetic Bearings
V-ring seal SKF Magnetic Bearings

V-ring seals are axial shaft seals, available in a wide range of sizes...

SKF Magnetic Bearings
self-sealing washer SKF Magnetic Bearings

These sealing components have long been part of the SKF product range...

SKF Magnetic Bearings
piston seal SKF Magnetic Bearings

The basic demand on piston seals as well as on rod seals for hydraulic cylinders under the operating conditions for which they have been chosen, is to maintain a high level of sealing performance during...

SKF Magnetic Bearings
rod seal SKF Magnetic Bearings

The rod seal is the seal in the hydraulic cylinder with the most demanding requirement specifications. In addition to normal wear and aging,...

new video Trelleborg Sealing Solutions ø 8 - 270 mm, 40 MPa (5800 psi) | Zurcon® L-Cup®
rod seal ø 8 - 270 mm, 40 MPa (5800 psi) | Zurcon® L-Cup® Trelleborg Sealing Solutions

A single-acting rod seal, Zurcon® L-Cup® is an alternative to the U-Cup....

video Trelleborg Sealing Solutions ø 47.42 - 405.75 mm, 35 MPa (5076 psi) | Turcon® AQ Seal® 5
double-acting piston seal ø 47.42 - 405.75 mm, 35 MPa (5076 psi) | Turcon® AQ Seal® 5 Trelleborg Sealing Solutions

The Turcon® AQ Seal® 5 is a patented development of the proven standard AQ Seal®. The Turcon® AQ Seal® 5 is a double-acting piston seal designed...

Trelleborg Sealing Solutions ø 1.93 - 405.75 mm, 41.4 MPa (6004 psi) | Turcon® CX(D)
double-acting piston and rod seal ø 1.93 - 405.75 mm, 41.4 MPa (6004 psi) | Turcon® CX(D) Trelleborg Sealing Solutions

The Turcon® CX(D) is a double-acting sealing system combining a machined elastomer energiser with a low friction Turcon® sealing element. Specifically...

Trelleborg Sealing Solutions ø 1.93 - 405.75 mm, 41.4 MPa (6004 psi) | Turcon® CX(S)
rod lip seal ø 1.93 - 405.75 mm, 41.4 MPa (6004 psi) | Turcon® CX(S) Trelleborg Sealing Solutions

The Turcon® CX(S) is a single-acting sealing system combining a stepped elastomer energiser with a low friction Turcon® sealing element. Specifically manufactured to tight tolerances, the stepped...

Trelleborg Sealing Solutions ø 1.93 - 405.75 mm, 41.4 MPa | Turcon® Double Delta® II
double-acting seal ø 1.93 - 405.75 mm, 41.4 MPa | Turcon® Double Delta® II Trelleborg Sealing Solutions

The original seal design developed to improve the performance of the O-Ring and Back-up ring used in the MIL-G-5514F...

video Trelleborg Sealing Solutions ø 1.93 - 405.75 mm, 35 MPa (5076 psi) | Turcon® T-Seal
T-ring piston and rod seal ø 1.93 - 405.75 mm, 35 MPa (5076 psi) | Turcon® T-Seal Trelleborg Sealing Solutions

The Turcon® T-Seal consists of a T-shaped elastomeric sealing element supported by a Turcon® Back-up ring on both sides. The T-Seal provides a stable base,...

12 products APSOparts®
APSOparts® -40 °C ... +120 °C
seal for rotating shaft -40 °C ... +120 °C APSOparts®

Material sealing lip and outer casing:NBR 70.445-04 Material stiffening sheet:high-carbon steel...

APSOparts® -40 °C ... +120 °C | 11.5010.1111
seal for rotating shaft -40 °C ... +120 °C | 11.5010.1111 APSOparts®

Material sealing lip:NBR Material stiffening sheet:Steel sheet AISI 1008/1010 Material case:Steel sheet AISI 1008/1010 Material spring:spring steel AISI 1070/1090...

APSOparts® -40 °C ... +120 °C | 11.5010.1112
seal for rotating shaft -40 °C ... +120 °C | 11.5010.1112 APSOparts®

Material sealing lip:NBR Material case:Steel sheet AISI 1008/1010 Material spring:spring steel AISI 1070/1090 Hardness:70 ±5 Shore A...

APSOparts® -40 °C ... +120 °C | 11.5010.1113
seal for rotating shaft -40 °C ... +120 °C | 11.5010.1113 APSOparts®

Material sealing lip:NBR Material case:Steel sheet AISI 1008/1010 Material spring:spring steel AISI 1070/1090 Hardness:70 ±5 Shore A Working temperature:-40...

APSOparts® -40 °C ... +100 °C
V-ring seal -40 °C ... +100 °C APSOparts®

Material:NBR 60.445-01 Working temperature:-40 to...

Saint-Gobain Performance Plastics ø 1 - 1500 mm (0.04 - 60
spring-energized lip seal ø 1 - 1500 mm (0.04 - 60") | OmniSeal® SES series Saint-Gobain Performance Plastics

OmniSeal® are high-performance spring-energized polymer seals capable of handling extreme service conditions. They are used where ultra-low friction, chemical compatibility and extreme...

Saint-Gobain Performance Plastics max. 3.5 MPa | OmniLip™ series
seal for rotating shaft max. 3.5 MPa | OmniLip™ series Saint-Gobain Performance Plastics

Saint-Gobain Performance Plastics, Seals Group, has a complete line of metal-cased lip seals with many PTFE and PTFE blended...

Saint-Gobain Performance Plastics max. 3.5 MPa | Dynalip® series
rotary-shaft PTFE radial lip seal max. 3.5 MPa | Dynalip® series Saint-Gobain Performance Plastics

Saint-Gobain High Performance Seals has a complete line of polymer-based Dynalip® seals with many PTFE and PTFE blended...

1 products CoorsTek
CoorsTek
spring-energized lip seal CoorsTek

Spring Energized Seals Energized PTFE seals offer extreme-temperature, high-pressure, chemically inert, static and dynamic seals for the most demanding applications. Our thin, flexible PTFE sealing jacket,...

6 products Garlock GmbH
new video Garlock GmbH max. 500 °F | 8091
seal for rotating shaft max. 500 °F | 8091 Garlock GmbH

The 8091 Hydra-Just™ Rotary seal is a revolutionary concept to replace mechanical seals in industrial pumping applications. This new technology provides leak free, no dilution and "outage-to-outage"...

Garlock GmbH -450 °F ... +500 °F | Gylon® Style 3565 ENVELON Gasketing®
PTFE gasket sheet -450 °F ... +500 °F | Gylon® Style 3565 ENVELON Gasketing® Garlock GmbH

Tighter seal Soft, deformable exterior conforms to surface irregularities; ideal for worn, warped or pitted flanges Stable blue core improves cold flow resistance Low bolt load requirements...

Garlock GmbH max. 180 °F | 9220 GARTHANE®
U-ring lip seal max. 180 °F | 9220 GARTHANE® Garlock GmbH

Benefits * Increased seal life and performances * Less equipment downtime * Fewer sizes save inventory expense * Eliminates...

HANSA FLEX Hydraulik
sealing ring HANSA FLEX Hydraulik

Properties: Design ==> Sealing...

1 products John Crane
John Crane -30 °C ... +200 °C, 0.2 - 1 barg | 83 series
bearing protection seal -30 °C ... +200 °C, 0.2 - 1 barg | 83 series John Crane

The Type 83 is a dual-segmented carbon bushing assembly designed to prevent the migration of...

1 products Misumi America
Parker Sealing and Shielding
rotary-shaft PTFE radial lip seal Parker Sealing and Shielding

PTFE Lip Seal Design Guide for hardware design, seal configuration and material...

Parker Sealing and Shielding
seal for rotating shaft Parker Sealing and Shielding

Rotary Seal Design Guide features complete seal selection for rotating shaft...

Parker Sealing and Shielding
lip seal Parker Sealing and Shielding

Packing Products: Lip seals and other traditional “packing”...

102 products Simrit
Simrit max. 80 °C, max. 0.05 MPa | COMBI series
seal for rotating shaft max. 80 °C, max. 0.05 MPa | COMBI series Simrit

Long service life High resistance to dirt ingress due to the...

Simrit max. 80 °C, max. 0.05 MPa | SF19
seal for rotating shaft max. 80 °C, max. 0.05 MPa | SF19 Simrit

Long service life High resistance to dirt ingress due to the...

Simrit max. 80 °C, max. 0.05 MPa | SF5
seal for rotating shaft max. 80 °C, max. 0.05 MPa | SF5 Simrit

Long service life High resistance to dirt ingress due to the...

Simrit max. 100 °C, max. 0.05 MPa | SF6 series
seal for rotating shaft max. 100 °C, max. 0.05 MPa | SF6 series Simrit

Long service life High resistance to dirt ingress due to the...

Simrit max. 80 °C, max. 0.05 MPa | SF8
seal for rotating shaft max. 80 °C, max. 0.05 MPa | SF8 Simrit

Long service life High resistance to dirt ingress due to the...

Simrit -25 °C ... +100 °C, max. 0.05 MPa | MSS 1 series
shaft seal -25 °C ... +100 °C, max. 0.05 MPa | MSS 1 series Simrit

- Broad range of applications, for example in industrial gearboxes - Reliable sealing of the housing bore, even with increased roughness...

1 products Heyco
Heyco max. 257 °F
self-sealing washer max. 257 °F Heyco

For use with Heyco-Flex fittings. Liquid tight, dust tight, and oil tight at enclosure. Suitable...

August Mink, Mink Bürsten
shaft seal August Mink, Mink Bürsten

Mink AD-System (AD) – the innovative solution for sealing shafts The Mink AD-System consists of a specially designed brush ring to seal shafts and to prevent coolants, swarf and mists from escaping....

1 products Fladder
Fladder
sealing ring Fladder

Only available for FLADDER® 150/MICRO Inside diameter/thickness: 50/8. The...

GORE electronics GR
PTFE gasket sheet GR GORE electronics

Gain the benefits of PTFE gasketing without the problems of creep and cold flow. Unmatched in sealing reliability, GORE® GR Sheet Gasketing provides...

GORE electronics Style 1200
PTFE gasket sheet Style 1200 GORE electronics

Pharmaceutical, food and beverage processing operations can trust new GORE® STA-PURE™ Sheet Gasketing Style 1200 to deliver exceptional sealing performance for bolted metal flanges and satisfy...

3 products HIRSCHMANN
HIRSCHMANN VI series
shaft seal VI series HIRSCHMANN

The seal usually employed in a stationery manner, i.e. with a rotating shaft. Care should be taken...

HIRSCHMANN VA series
shaft seal VA series HIRSCHMANN

At low peripheralspeeds and very good – if possible, lapped – mating surfaces, it can also be used with...

HIRSCHMANN DI series
shaft seal DI series HIRSCHMANN

Axial shaft seal with internal sealing lip, for use with liquids under high pressure....

1 2 3 4
Filter by :
Related categories
Search by product
Search by manufacturer
Search by catalog
With DirectIndustry you can find a nearby distributor, contact a manufacturer for an estimate or a price, or examine product characteristics and specifications.