|
|
"EH3" Compact, Low Torque Actuator - Recommended for KZValves 1/4" to 1".
FEATURES:
- High quality, durable actuator housing rated:
NEMA 6P - Waterproof tested
NEMA 7D - Ignition Protection tested
- 12/24 VDC and 24 VAC operation available
- Available cycle times - .8 to 12 seconds
- Hundreds of wiring combinations available
- Recommended for KZValves 1/4" to 1" valves
- 35 to 65 in-lbs torque
- Tough aluminum gear box with metal gears
- Actuator housing available with "indicator flag" or with "blank" lid
- Waterproof connector plugs
- Mountable at any angle
- 110V operation with AC adaptor
- Private labeling available
- Customization available for your specific application!
|
|
For quarter-turn applications the IQT is designed for direct drive, and can be mounted at any operating angle. The rugged construction is double-sealed to prevent water and dust ingress even during site wiring.
Torque range 50 to 2,000 Nm (36 to 1,475 lbf-ft).
Available for three-phase, single-phase or DC supplies.
Variable output speed.
Multiport controller option.
Secure self-locking output for butterfly valves and dampers without the use of additional brakes.
|
|
The GPSA is a low thrust, high precision linear actuator designed for use in chemical dosing and other process control applications where continuous modulation and tight accuracy are required.
Thrust range up to 890 N (200lbf).
Stroke distance up to 35mm (1.375")
Continuous unrestricted modulating duty
HART, Profibus and Foundation Fieldbus available
Temperature range from -20C to 65C (-4F to 150F)
Automatic thrust limiting available
Self locking drive system to hold in last position and prevent backdriving up to thrust rating
Manual override as standard.
Integral PI (Proportional & Integral) control.
Adjustable speed.
Output characterization.
Password protection.
Non-intrusive setup and calibration.
AC input power (single phase).
|
|
Provides intelligent communication options and a multilingual display. The IQ actuator range offers multi-turn and quarter-turn isolating/regulating duty.
Torque range 14 to 3,000 Nm (10 to 2,200 lbf-ft) direct drive (multi-turn only). Higher torques when combined with IS or IB gearbox, up to 40,800 Nm (30,000 lbf-ft). Quarter-turn when combined with IW gearbox up to 250,000 Nm (185,000 lbf-ft).
Complete integrated motor control.
Simple non-intrusive, infra-red setup and adjustment.
Digital, analogue or bus system remote control and status reporting.
Comprehensive software tools for plant records and valve performance analysis.
|
|
|
Rotork Process Controls manufactures electric actuators for specialised processing and environmental control valve applications. The CVA and GPSA actuator ranges apply state-of-the-art electrical and mechanical technologies to the smart operation of linear and rotary control valves demanding continuous, repeatable modulation, with a programmable fail to position option. The range demonstrates unrivalled control valve automation, combined with advanced, non-intrusive calibration and valve diagnostic technologies.
|
|
Schneider Electric Motion actuators position flaps, valves or sliders with great precision. The compact actuator housing contains a motor, a gearbox and a control unit. Three different types of actuators are available to respond to your specific positioning challenge:
STE = electronic actuator
STA = actuator with cams and relais
STM = actuator with cams
|
|
Greatork Electric intelligent valve actuator
Main Type: Quarter-turn, Part-turn, Linear
Greatork Actuators are widely used in the industries of valve, oil field, water treatment, waste water process and power plant etc..
Actuator design features:
Torque range from 50 Nm to 3000 Nm
Output speeds from 18 to 72 rpm
Limit and torque seating
Output drive types according to ISO standard
Available with 3-ph AC, 1-ph AC iother power supply such as 440V,110V,480V,etc..
Some advantages of our actuator:
1.SOC ( system on a chip)
2.Non-intrusive design
3. LCD display and Local Control
4. Emergency Shut Down (ESD)
5. Infrared Setting & Control Technologies
6. Safety Protection
7.Error Detect & Alarm Function
|
|
|
|
|
|
Top Line TE Series electric actuators provide unsurpassed quality, reliability and value to your automated system.
Some of the key standard features and benefits of the TE Series actuators are:
Multiple voltages available : 24VAC, 24VDC, and 115VAC single phase to fit your process needs
Nema 4, 4X & IP67 lightweight polyester powder coated aluminum housing
External manual override so you wont need to worry in a power failure
Four limit switches two for operation / two auxiliary dry contacts
Anti-condensation space heater for reduced downtime and increased reliability
Visual position indicator for your convenience
Captive cover bolts for your convenience
Optional Features:
Integral modulating card for full PLC control
Position Indication (Potentiometer) for continuous position monitoring
Advantages:
Multiple voltages available : 24VAC, 24VDC, and 115VAC single phase to fit your process needs
Nema 4, 4X & IP67 lightweight polyester powder coated aluminum housing
External manual override so you wont need to worry in a power failure
Four limit switches two for operation / two auxiliary dry contacts
Anti-condensation space heater for reduced downtime and increased reliability
Visual position indicator for your convenience
Captive cover bolts for your convenience
|
|
Electromechanical actuators for a simple and reliable control of the valve.
400 Series for non-rising stem applications.
401 Series for rising stem applications (output with or without axial thrust).
Main characteristics:
Torque range from 10 Nm to 12.000 Nm.
Output speeds from 2,75 to 224 rpm.
Torque and position setting.
Output flanges and bushes according to ISO 5210.
Handwheel for manual operation.
High degree of weatherproof protection IP67 (IP68 optional). High quality corrosion protection.
Wide range of switching and signalling options.
|
|
90 Degree Electric actuator with torques from 200 in. lb. to 1000 in. lb. NEMA 4 and 4X CSA listed.
|
|
|
|
|
|
SAFIs series SM includes two models of corrosion resistant, robust and versatile electric actuators, with ISO
mounting plates, to be used with ball valves and butterfly valves. The fully sealed casings are made of
polyethylene or glass reinforced polypropylene for anti-corrosion protection. Continuous torques of 30N.m
can be delivered with a service ration of 30%. The slewing angle can be adjusted to 330, and high slewing
speeds can be provided (0.5 seconds for a turn).
Series CB compact electric ball valves combine an electric actuator Series SM1 with a ball valve built into the
motors glass reinforced polypropylene base plate, eliminating the need for mounting brackets and stem
couplings. This results in the most economic electric actuated ball valve on the market. It is available up to
DN40 (1). Fast operation times make it the ideal equipment for automatic dosing systems in fine chemicals,
electronics and photographic industries.
Supply voltage from 12V to 48V DC or AC, and 110V or 240V AC.
Torques up to 30 NM
Rotation speed up to 20 rpm
ISO 5211 F05 baseplate. Choice of female square spindle drives 11mm or 14mm
2 or 4 limit switches, heating resistor option and manual override are avaialble.
|
|
Advantages:
high torque output
compact size
minimum external control efforts
solid metal casing
numerous options
Description:
Because of the high breakaway resistance of many valves, the TA-Actuator 130 is
regulary equipped with a direct-current motor with a matching flow of torque.
The motor is controlled by reliable internal cam switches. A constant accuracy in the reproduction of certain rotation angles is achieved by an electronic brake.
|
|
Advantages:
high torque output
compact size
minimum external control efforts
solid metal casing
numerous options
Description:
Because of the high breakaway resistance of many valves, the TA-Actuator 120 is
regulary equipped with a direct-current motor with a matching flow of torque.
The motor is controlled by reliable internal cam switches. A constant accuracy in the reproduction of certain rotation angles is achieved by an electronic brake.
The actuator is delivered with a complete wiring in order to reduce costs for external control equipment.
|
|
Advantages:
high torque output
compact size
minimum external control efforts
solid metal casing
numerous options
Description:
Because of the high breakaway resistance of many valves, the TA-Actuator 70 is
regulary equipped with a direct-current motor with a matching flow of torque.
The motor is controlled by reliable internal cam switches. A constant accuracy in the reproduction of certain rotation angles is achieved by an electronic brake.
The actuator is delivered with a complete wiring in order to reduce costs for external control equipment.
|
|
|
A full range of electric actuators are available, to suit the Tomoe valve range. From 1 Phase IP67 models to 3 Phase Explosion/Flameproof models, all sized and matched to customer specifications and the Tomoe valve characteristics.
|
|
PREMIO 2,2kN,PREMIO 5kN
Electric actuator ARI-PREMIO
Application : Industrial installations, processing technology, plant manufacturing, etc.
|
|
|
corrosion-resistant design. Three offerings with 13 models for torque outputs to 22,125 lb-in. Compact and lightweight with NEMA 4, 4X, 7 and 9 rated housings available, as are numerous control options and position indicators..
|
|
|
|
|
|
Metso Automations Valvcon V-Series is a compact, rugged, reliable electric actuator designed for quarter-turn valve and damper applications and is available in both NEMA 4/4X and NEMA 4/4X/7&9 configurations. Notable features include all hardened steal spur gears, standard ISO 5211 mounting interfaces and CSA Certification to both Canadian and US Standards.
Other features include full access to cams and limit switches, 75% duty cycle, fuse protection for inputs and outputs, internal thermal-overload protection, wrench-operated manual override and visual position indication.
The plug-in Control Board option for modulating applications incorporates innovative features such as simple push button set up, auto calibration, selectable input control signal, position feedback signal, and signal fail position selection. Other standard features include local push button control, adjustable dead band, adjustable speed control, and locked output stall protection. The Control Board can be easily configured for reverse acting and split ranging control without any wiring changes.
Other options and accessories include the Iso/Readback and Speed Control/Timer Board options, a holding brake, tropical and standard heater/thermostat options, fully adjustable auxiliary limit switches and a declutchable handwheel override. All of the options are designed for easy field installation. The V-Series is available for valve and damper service up to 3000 inch pounds (250 lb-ft) of torque.
|
|
|
The EL3500 series actuators are suitable for on/off control, modulating control with valve motor drive controller or modulating control with its integral valve positioner electronics.
|
|
Actuators
An extensive range of pneumatic, hydraulic and electric quarter turn actuators for all valves within the Tyco series. Incorporating features to ensure trouble free operation with long life expectancy, pneumatic, hydraulic and electric actuators ensure high performance and smooth operation in all application duties.
Pneumatic Actuators
* Rack and Pinion
* Scotch Yoke
* Heavy Duty Scotch Yoke
* Double / Single Acting
* Fail-safe
Electric Actuators
* Compact economical
* Heavy duty
* Quarter / Multi-turn
* Fail-safe
Hydraulic Actuators
* Double Acting
* Fail-safe
* Subsea
|
|
Electric Oden P50H, P220H and P500H lever control valve actuators for special applications.
High precision through the Oden Gear System.
Fits most types of valves using ASAB standardised lever modules and assembly kits
Voltage 24 VDC.
Analogue control 4-20 mA or digital.
|
|
Electric Oden P30G och P30EXG high torque turning valve actuators
High precision through the Oden Gear System.
Fits most types of valves using added gear with ASAB standardised modules and assembly kits
Voltage 24 VDC.
Analogue control 4-20 mA or digital.
Torque up to 4500 kN.
|
|
Motorized hydraulic pump operates continuously,
ensuring positional control with continuous modulation
is available in addition to accumulator storage.
When the system is fully charged, the pump will automatically
unload with a signal from the integral pressure switch
ensuring no excessive heat generation.
|
|
The Skilmatic range is a self-contained electro-hydraulic valve actuation solution available for both quarter-turn and linear applications. The actuators incorporate sophisticated electronics that provide non-intrusive set-up and interrogation via an infra-red hand held remote. They are suitable for on/off, modulating and emergency shutdown duties in applications up to SIL 3.
Linear thrust output 1.7 to 5500kN.
Quarter-turn torque output 65 to 600,000Nm.
Single-, three-phase or 24Vdc power supply options.
Non-intrusive infrared setting & configuration.
LCD display for position, pressure, diagnostics and fault indication.
Optional bus communications via all major protocols.
Partial stroke test capability.
Watertight or explosionproof.
Double-sealed terminal compartment.
ATEX, FM, CSA, IEC and GOST certified.
|
|
|
Electro-hydraulic valve actuators for positional, modulating and stepping control of globe, choke, plug, gate, ball, and butterfly valves, for hazardous areas and severe environments, these can be self contained with their own power packs and tank systems or be fitted into an existing hydraulic ring main circuit.
|
|
Actuation and control for turbo machinery:
Modern turbo machinery needs to fulfill two basic prerequisites - optimum operation and low impact on the environment. Voith Electronic Drive Systems are active in the field of positioners and control for turbo machinery.
This comprises actuation for gas turbines, steam turbines and compressors, such as for example complete valve assemblies (valve with servo motor), servo motors or pilot controls designed as I/H-converters and way valves for existing positioners and the control system Turcon (turbine control) for steam turbines and compressors.
|
|
Description:
The Becker Environmentally-Friendly Positioner (EFP Series) is used with pneumatically actuated natural gas control valves to provide an accurate valve stem position that is proportional to the electronic command input signal received from an electronic controller. All Becker EFP’s are rated Explosion Proof Class 1, Div. 1 for use in hazardous locations. The EFP is compatible with all Becker actuators and may be retrofit to most manufacturer's control valve packages as well. The EFP eliminates the need for an I/P transducer and features ZERO bleed consumption at steady state. Additionally, the EFP features easy, solid state adjustment and multiple failure modes to protect your gas pipeline.
|
|
|
|
|
|
Actuators (90 quarter turn actuators) for ball valves and butterfly valves, explosion proof
Electrical, explosion proof quarter turn actuators series ExMax and RedMax, for ball valves, butterfly valves and mixing valves, from 5 Nm to 100 Nm, in acc. with ATEX 94/9/EC for installation in hazardous areas zone 1, 2, 21 and 22, for all kind of gas, vapours, mixtures and dust. Actuators with or without fail safe spring return function. 24 to 230 VAC/DC multivoltage supply, 5 motor running times adjustable on site, on-off, 3-pos, 0...10 VDC, 4...20 mA mode, 100 % overload protected. Robust aluminium housing with IP 66 protection, optional stainless steel version, integrated heater for use from -40C to +40C/+50C, cable connection, approx. 1 m cable, manual override, squared shaft connection 12 12 mm (size S) and 16 16 mm (size M). Series ExMax-... for use in zone 1, 2, 21 and 22. Series RedMax-... for use in zone 2 and 22. Optional accessories like external adaptable aux. switches, terminal boxes and mounting brackets available. Adaptations for all typical quarter turn valves available.
|
|
Actuators - HercuLine
HercuLine actuators are engineered for exceptional reliability, accurate positioning and low maintenance. Designed for very precise positioning of dampers and quarter-turn valves, they perform especially well in demanding environments.
HercuLine 2000 Series
HercuLine 2000 series actuators incorporate the high quality and reliable features of the traditional HercuLine actuators with the added benefits of a microprocessor-based Enhanced Electronics Unit.
HercuLine 10260
The HercuLine 10260A medium-torque rotary actuator is engineered for exceptional reliability, accurate positioning and low maintenance.
HercuLink Software
HercuLink software enables access to programming and communication functions using RS485/Modbus communications that is standard with HercuLine actuators.
|
|
Honeywells HercuLine 2000 series actuators are low-torque (50 to 400 lb-in), precision electric actuators incorporating all of the easy-to-use, high-quality and reliable features of traditional HercuLine actuators, ensuring processes operate at maximum efficiency with minimal downtime and lowest lifetime cost. They are industrial rated and engineered for very precise positioning of dampers and valves. They perform especially well in extremely demanding environments requiring continuous duty, high reliability and low maintenance.
HercuLine 2000 series actuators incorporate all of the high quality and reliable features of the traditional HercuLine actuators with the added benefits of a microprocessor-based Enhanced Electronics Unit (EEU). These benefits make it easier to set up and maintain the actuator and allows the customer to monitor the health of the actuator for proactive maintenance planning
|
|
|
|
Valve actuators
